소개
The Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper is designed to provide an efficient and long-lasting solution for toilet repair. Fluidmaster, a leading brand in toilet repair since 1957, is committed to offering easy-to-install products that ensure optimal performance and water conservation. This flapper is engineered to fit a wide range of 3-inch flush valve toilets, offering durability with its silicone seal and solid frame design.
설정 및 설치
시작하기 전에
- Ensure the toilet water supply is turned off at the wall valve.
- Flush the toilet to empty the tank completely.
설치 단계
- Remove Old Flapper: Carefully unhook the old flapper from the flush valve ears and detach its chain from the flush lever. Dispose of the old flapper responsibly.
Diagram showing the internal components of a toilet tank, including the flapper and fill valve.
- Install New Flapper: Take the new Fluidmaster 5403 flapper. Push the clips on the flapper onto the flush valve ears until they securely snap into place.
The Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper, ready for installation. Note the adjustable arms and silicone seal.
- Attach Chain: Attach the flapper chain to the flush lever. Ensure there is approximately 1/2 inch of slack in the chain when the flapper is closed. Too much slack can prevent a full flush, while too little can cause the flapper to not seal properly.
- Adjust Water Saving Settings (Optional): The Fluidmaster 5403 features an adjustable cone with settings from 0 to 10. A higher number allows more water per flush, while a lower number saves water. Refer to the "Operating Instructions" section for detailed adjustment.
Flapper settings table showing recommended settings and chain lengths for various toilet brands and models to optimize water usage.
- 물 공급 복구: Turn the water supply back on to fill the tank. Check for any leaks around the flapper or connections.
자세한 시각적 안내는 공식 자료를 참조하십시오. 설치 설명서(PDF).
This video demonstrates the complete installation process of the Fluidmaster 5403 flapper, including removal of the old flapper, attachment of the new flapper, and adjustment of the chain and water-saving settings.
작동 지침
Adjusting Water Saving Settings
The Fluidmaster 5403 flapper allows you to customize the amount of water used per flush, helping to save water and reduce your water bill.
To adjust the water volume:
- Locate the adjustable cone on the underside of the flapper.
- Rotate the cone to select a setting from 0 to 10. A setting of '0' (or lower numbers) means less water is flushed, while '10' (or higher numbers) means more water is flushed.
- Test the flush after each adjustment to ensure proper performance. If the toilet does not flush properly (e.g., weak flush), increase the setting by one.
Consult the "Flapper Settings" table in the installation section or on the product packaging for recommended settings based on your toilet's brand and model.
유지
Regular inspection of your Fluidmaster 5403 flapper can help prevent future issues and ensure continued water efficiency.
- 누출 확인: Periodically check for "phantom flushes" (toilet refilling itself without being flushed), which indicates a slow leak. This is often caused by a worn or improperly seated flapper.
- 깨끗한: If mineral deposits build up on the flapper or flush valve seat, gently clean them with a non-abrasive cleaner. Avoid harsh chemicals that can damage rubber components.
- Inspect Silicone Seal: The durable silicone seal is designed for long life and chlorine resistance. However, inspect it annually for any signs of wear, cracking, or deterioration. Replace the flapper if significant wear is observed.
For more in-depth maintenance tips, refer to the 문제 해결 가이드(PDF).
문제 해결
일반적인 문제 및 솔루션
- Toilet Runs Constantly:
- 원인: Flapper not sealing properly, chain too short, or debris on the flush valve seat.
- 해결책: Ensure the chain has 1/2 inch of slack. Clean the flush valve seat and the flapper's silicone seal. Adjust the water-saving setting if it's too low for your toilet.
- 약한 물내림:
- 원인: Water-saving setting too low, or insufficient water in the tank.
- 해결책: Increase the water-saving setting on the flapper. Ensure the fill valve is filling the tank to the correct water line.
For additional troubleshooting steps and solutions, please consult the 문제 해결 가이드(PDF).
명세서
| 기인하다 | 값 |
|---|---|
| 재료 | 고무 |
| 상표 | 플루이드마스터 |
| 품목 치수 L x W x H | 5.25 x 9 x 3.25 인치 |
| 외부 마감 | 빨간색 |
| 입구 연결 크기 | 3 인치 |
| 입구 연결 유형 | 3-inch flush valve |
| 콘센트 연결 유형 | 3-inch connection |
| 포트 수 | 2 |
| 콘센트 연결 크기 | 3 인치 |
| 밸브 유형 | 기준 |
| 국제 무역 식별 번호 | 00039961015433 |
| 제조업체 | 플루이드마스터 |
| 한국어: | 039961015433 |
| 부품 번호 | 5403 |
| 품목 무게 | 2.39 온스 |
| 제품 치수 | 5.25 x 9 x 3.25 인치 |
| 원산지 | 중국 |
| 품목 모델 번호 | 5403P4 |
| 제조업체에서 중단되었습니다 | 아니요 |
| 크기 | 3 인치 |
| 색상 | 빨간색 |
| 스타일 | 변기 플래퍼 |
| 모양 | 모양 |
| 품목 패키지 수량 | 1 |
| 핸들 수 | 1 |
| 특별 기능 | 조절할 수 있는 |
| 포함된 구성 요소 | Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper |
| 배터리가 포함되어 있나요? | 아니요 |
| 배터리가 필요하세요? | 아니요 |
| 보증 설명 | 일생 |
보증 및 지원
보증: The Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper comes with a Lifetime warranty, ensuring long-term reliability and peace of mind.
제조업체: 플루이드마스터
For product support, technical assistance, or warranty claims, please visit the official Fluidmaster website or contact their customer service directly. Contact information can typically be found on the product packaging or their official web대지.
