소개
The DIGITUS Professional DN-19 TRAY-1-400-SW is a 1U fixed shelf designed for secure installation within 19-inch network or server cabinets. This shelf provides a stable and robust surface for housing various non-rack-mountable components, such as modems, small servers, or other networking equipment. Its perforated design ensures adequate airflow, contributing to the thermal management of your cabinet. This manual provides essential information for the correct installation, operation, and maintenance of your fixed shelf.
Figure 1: DIGITUS Professional DN-19 TRAY-1-400-SW 1U Fixed Shelf. This image shows the black perforated shelf designed for 19-inch rack mounting.
안전 정보
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in injury or damage to the product or other equipment.
- 하중 용량: Do not exceed the maximum load capacity of 15 kg (33 lbs) for this shelf. Overloading can cause structural failure and damage.
- 적절한 설치: Ensure the shelf is securely fastened to the 19-inch cabinet rails using all provided mounting hardware. Loose installation can lead to instability.
- Cabinet Compatibility: This shelf is designed for 19-inch cabinets with a minimum depth of 600 mm. Verify your cabinet's specifications before installation.
- 무게 분포 : Distribute the weight of equipment evenly across the shelf surface to maintain stability.
- 도구: Use appropriate tools for installation. Avoid overtightening screws, which can strip threads or damage components.
패키지 내용
포장을 개봉할 때 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 누락되거나 손상된 구성품이 있는 경우 즉시 공급업체에 연락하십시오.
- 1 x DIGITUS Professional DN-19 TRAY-1-400-SW 1U Fixed Shelf
- Mounting Material (screws, cage nuts, washers)
설정 및 설치
Follow these steps to properly install the fixed shelf in your 19-inch network or server cabinet.
- 내각을 준비하세요: Ensure your 19-inch cabinet has a minimum depth of 600 mm and is clear of any obstructions at the desired installation height. Identify the front 19-inch profile rails where the shelf will be mounted.
- Position the Shelf: Align the mounting ears of the DN-19 TRAY-1-400-SW shelf with the desired 1U (1.75 inches or 44.45 mm) height on the front 19-inch profile rails of your cabinet.
- 선반 고정: Using the provided mounting screws, cage nuts, and washers, attach the shelf to the front profile rails. Insert cage nuts into the square holes of the rack rails at the desired height. Then, align the shelf's mounting ears and secure them with the screws. Tighten all screws firmly but do not overtighten.
- 안정성 확인: Gently test the installed shelf to ensure it is stable and securely fastened before placing any equipment on it.
그림 2: 예ample of the fixed shelf installed in a 19-inch rack. This image illustrates how the shelf is mounted to the front rails of a server cabinet.
작동 지침
Once installed, the DIGITUS Professional DN-19 TRAY-1-400-SW shelf is ready for use.
- Placement of Equipment: Carefully place your non-rack-mountable equipment onto the shelf. Ensure that the weight is distributed as evenly as possible.
- 부하 제한: Always adhere to the maximum load capacity of 15 kg. Do not place items exceeding this weight on the shelf.
- 공기 흐름: The perforated design of the shelf promotes airflow. Avoid blocking the perforations with equipment or cables to maintain proper ventilation within the cabinet.
유지
The DIGITUS Professional DN-19 TRAY-1-400-SW requires minimal maintenance to ensure its longevity and continued performance.
- 청소: Periodically clean the shelf surface with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
- 점검: Regularly inspect the mounting screws to ensure they remain tight. Over time, vibrations or changes in temperature can cause screws to loosen.
- 손상 확인: Check for any signs of damage, suchs as bends, cracks, or corrosion. If significant damage is found, consider replacing the shelf.
문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
- Shelf is not stable after installation:
- 모든 고정 나사가 단단히 조여졌는지 확인하십시오.
- Verify that the shelf is correctly aligned with the 19-inch rack rails.
- Check if the cabinet itself is stable and on a level surface.
- Cannot install the shelf into the cabinet:
- Confirm that your cabinet is a standard 19-inch rack.
- Ensure the cabinet depth is at least 600 mm, as this shelf requires sufficient depth for proper fitment.
- Check for any obstructions within the cabinet that might prevent the shelf from being installed at the desired position.
- Shelf appears to sag under load:
- Immediately remove some weight from the shelf.
- Verify that the total weight of the equipment does not exceed the 15 kg load capacity.
- Ensure weight is distributed evenly.
명세서
| 상표: | 디지 터스 |
| 모델: | DN-19 트레이-1-400-SW |
| 폼 팩터: | 1U |
| 치수(높이 x 너비 x 깊이): | 44mm x 482mm x 399mm |
| 하중 용량: | 15kg |
| 장착 유형: | Fixed installation, front only |
| Suitable Cabinet Depth: | 600mm부터 |
| 재료: | Alloyed Steel (Legierter Stahl) |
| 색상: | 검정색(RAL 9005) |
보증 정보
Specific warranty terms and conditions for the DIGITUS Professional DN-19 TRAY-1-400-SW shelf may vary by region and retailer. Please refer to the official DIGITUS web자세한 보증 정보는 해당 웹사이트를 방문하거나 구매처에 문의하십시오.
지원하다
For technical assistance, product inquiries, or further support, please visit the official DIGITUS website or contact your local DIGITUS distributor or reseller. You can often find FAQs, driver downloads, and contact information on their support pages.
