Nyko 86074

Nyko Charge Base S for Xbox 360 Controller Charger

사용 설명서

1. 제품 오버view

The Nyko Charge Base S is designed to conveniently store and charge two Xbox 360 wireless controllers. It includes two custom NiMH rechargeable batteries, providing an easy drop-in charging solution. The dual-port recharging dock is AC powered, eliminating the need for additional cables to the console. Each rechargeable battery offers up to 20 hours of playtime.

Nyko Charge Base S with two Xbox 360 controllers and two rechargeable battery packs

Image: The Nyko Charge Base S, showcasing the charging dock, two Xbox 360 controllers, and two separate rechargeable battery packs.

주요 특징:

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

Nyko Charge Base S product packaging showing the charger, controllers, and batteries

Image: The retail packaging for the Nyko Charge Base S, illustrating the included charger, two Xbox 360 controllers, and two rechargeable battery packs.

3. 설정

3.1 Installing the Rechargeable Batteries

To prepare your Xbox 360 wireless controllers for charging with the Nyko Charge Base S, you must first install the custom NiMH rechargeable batteries.

  1. Open the battery compartment on the back of your Xbox 360 wireless controller.
  2. Remove any existing batteries or battery packs.
  3. Insert a Nyko custom NiMH rechargeable battery pack into the compartment, ensuring the contacts align correctly.
  4. 배터리 덮개를 단단히 닫으세요.
Xbox 360 controller with Nyko rechargeable battery pack installed

Image: An Xbox 360 wireless controller shown with the Nyko rechargeable battery pack correctly installed in its rear compartment.

Close-up of Nyko rechargeable battery pack

이미지: 클로즈업 view of the Nyko custom NiMH rechargeable battery pack, highlighting its contact points and design.

3.2 Connecting the Charge Base S

Connect the Charge Base S to a power source:

  1. Plug the AC power adapter into the power input port on the back of the Charge Base S.
  2. AC 전원 어댑터의 다른 쪽 끝을 일반 벽면 콘센트에 꽂으세요.
  3. The Charge Base S is now ready for use.

4. 운영

4.1 충전 컨트롤러

To charge your Xbox 360 wireless controllers:

  1. Ensure the custom NiMH rechargeable batteries are installed in your controllers (refer to Section 3.1).
  2. Gently place an Xbox 360 wireless controller onto one of the charging docks on the Charge Base S. Ensure the controller's battery contacts align with the charging pins on the base.
  3. The LED indicator on the Charge Base S for that dock will illuminate to show the charging status.
  4. Repeat for the second controller if desired.
Two Xbox 360 controllers docked on the Nyko Charge Base S

Image: Two Xbox 360 wireless controllers are shown securely docked in the Nyko Charge Base S, indicating they are ready for or currently undergoing charging.

4.2 LED 표시등

The Charge Base S features LED indicators to communicate the charging status of each controller:

표시기 색상상태
빨간색Controller is charging.
녹색Controller is fully charged.
끄다No controller docked or charging cycle complete and controller removed.

A single battery typically charges in approximately 2 hours, while two batteries charging simultaneously will take about 4 hours.

5. 유지관리

6. 문제 해결

If you encounter issues with your Nyko Charge Base S, please refer to the following table:

문제가능한 해결책
컨트롤러가 충전되지 않습니다.Ensure the AC power adapter is securely plugged into both the Charge Base S and a working wall outlet. Verify that the controller is correctly seated on the charging dock and the battery contacts are aligned. Check if the custom NiMH battery pack is properly installed in the controller.
LED 표시등이 켜지지 않습니다.Confirm the Charge Base S is receiving power. Try plugging it into a different outlet. Ensure a controller with a Nyko battery pack is correctly placed on the dock.
Short battery life after charging.Batteries may have reached the end of their lifespan and require replacement. Ensure controllers are fully charged (green LED) before use.
Controller does not fit on the dock.Ensure you are using an official Xbox 360 wireless controller with the Nyko custom NiMH battery pack. The Charge Base S is specifically designed for this configuration.

7. 사양

8. 보증 및 지원

For warranty information, technical support, or to register your product, please visit the official Nyko web해당 사이트를 방문하거나 고객 서비스에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

자세한 내용을 보려면 아래 QR 코드를 스캔하세요.

QR code linking to Nyko Technologies product information for model 86074

Scan this QR code for additional product information and support from Nyko Technologies.

관련 문서 - 86074

사전view Nyko Xbox Series X|S 및 Xbox One용 충전 베이스 사용 설명서
Xbox Series X|S™ 및 Xbox One™ 콘솔용 컨트롤러 충전 솔루션인 Nyko Charge Base의 사용 설명서입니다. 설치, 기능, 문제 해결 및 보증 정보가 포함되어 있습니다.
사전view Nyko 충전 베이스 PlayStation 4 컨트롤러 빠른 설정 가이드
플레이스테이션 4 컨트롤러용 듀얼 포트 충전 도크인 Nyko Charge Base의 간편 설정 가이드입니다. 컨트롤러 충전 방법, 기기 관리 방법, 그리고 보증 정보를 알아보세요.
사전view Nyko NU-3500 헤드셋 사용 설명서 및 제품 정보
Nyko NU-3500 유선 오디오 및 채팅 헤드셋의 공식 사용자 설명서 및 제품 상세 정보입니다. 기능, 사양, 설정, 문제 해결 및 보증 정보가 포함되어 있습니다.
사전view Nyko PlayPad Glow 무선 컨트롤러 사용 설명서
Nyko PlayPad Glow 무선 컨트롤러의 기능, PC, Android 및 Nintendo Switch 설정, 버튼 배치, RGB 조명, 터보 기능 및 문제 해결 방법을 자세히 설명하는 종합 사용자 설명서입니다.
사전view Nyko Air Flo EX PC 컨트롤러 사용 설명서 및 설정 가이드
PC용 Nyko Air Flo EX 컨트롤러를 설정하고 사용하기 위한 포괄적인 가이드로, 기능, 소프트웨어 설치, 사용자 정의, 관리, 문제 해결 및 기술 지원이 포함되어 있습니다.
사전view 닌텐도 스위치용 Nyko Dualies 무선 컨트롤러 - 사용 설명서
닌텐도 스위치용 Nyko Dualies 무선 컨트롤러(모델 87268, 87269, 87272)의 종합 사용 설명서입니다. 설정, 동기화, 터보 발사, 충전, 문제 해결 및 보증 정보가 포함되어 있습니다.