1. 서론
This manual provides detailed instructions for installing the Metra 95-2009 Double DIN Installation Multi-Kit. This kit is designed to facilitate the installation of a double-DIN radio or two single-DIN radios in select 1990 to 2012 GM, Honda, Isuzu, and Suzuki vehicle models. It features Metra's patented quick-release snap-in ISO mount system with a custom trim ring, ensuring a secure and integrated fit for your aftermarket stereo system.
2. 안전 정보
- 단락 및 감전을 방지하기 위해 전기 작업을 시작하기 전에 항상 차량 배터리의 음극 단자를 분리하십시오.
- 설치 시에는 눈 보호구를 포함한 적절한 안전 장비를 착용하십시오.
- 전기적 위험을 예방하기 위해 모든 연결 부분이 안전하고 적절하게 절연되어 있는지 확인하세요.
- Refer to your vehicle's service manual for specific instructions on removing dash components and accessing wiring.
3. 패키지 내용
키트에 아래 나열된 모든 구성품이 포함되어 있는지 확인하십시오.
- Double DIN Dash Kit Components (Plastic Brackets and Trim Ring)
- 장착 나사 및 패스너
- 설치 설명서
Figure 3.1: Main components of the Metra 95-2009 Double DIN Installation Multi-Kit, including plastic brackets and trim ring.
Figure 3.2: Included mounting screws and fasteners for securing the radio and dash kit.
4. 설정
4.1 필요한 도구
- 패널 제거 도구
- 드라이버 세트 (십자 드라이버 및 일자 드라이버)
- 전선 피복 벗기기/압착기
- Multimeter (for verifying wiring)
- 전기 테이프 또는 열수축 튜브
- 집 타이
4.2 설치 전 확인
- Confirm vehicle compatibility with the Metra 95-2009 kit.
- Read through the entire instruction manual before starting.
- 필요한 모든 도구와 구성 요소를 모으십시오.
5. 설치 지침
5.1 순정 라디오 제거
Carefully remove the factory radio and any surrounding trim panels using a panel removal tool. Refer to your vehicle's specific service manual for precise instructions on trim removal and screw locations. Disconnect all wiring harnesses and the antenna cable from the back of the factory radio.
Video 5.1.1: General guide on removing a factory stereo and trim panels. Note: This video is from Scosche Industries and may not show your exact vehicle model, but the general principles apply.
5.2 Assembling the Dash Kit
The Metra 95-2009 kit includes plastic brackets and a custom trim ring. Follow the kit's specific instructions to break off any unnecessary tabs from the brackets that are not required for your vehicle's application. Secure the new aftermarket radio to the dash kit brackets using the screws provided with your new radio.
비디오 5.2.1: 끝view of a dash kit and its components. This video is from an influencer and shows a similar kit, providing a general idea of the parts involved.
5.3 배선 연결
Connect the wiring harness from your new radio to the vehicle's wiring harness. Match wire colors carefully (e.g., yellow to yellow for constant 12V, red to red for ignition 12V, black to black for ground). Use wire strippers/crimpers and splice connectors or solder for secure connections. Insulate all connections with electrical tape or heat shrink tubing. If your vehicle has steering wheel controls, consult the radio's manual for specific connections, or tape off unused wires.
Video 5.3.1: Detailed guide on full stereo harness installation. Note: This video is from Scosche Industries and provides general wiring principles.
5.4 Installing the New Radio
Once the radio is secured to the dash kit and all wiring connections are made, carefully slide the assembled unit into the vehicle's dash opening. Secure the radio and dash kit to the vehicle's mounting points using the original screws or those provided with the kit. Reinstall any removed trim panels, ensuring they snap securely into place.
영상 5.4.1: 장군 끝view of installing a new radio with a dash kit. This video is from an influencer and shows a similar kit, providing a general idea of the installation process.
5.5 Reconnecting the Battery and Testing
Reconnect the vehicle's negative battery terminal. Turn on the vehicle and test the functionality of your new radio, including audio, display, and any connected accessories like a backup camera. Ensure all features are working correctly before finalizing the installation.
6. Operating the New Radio
Refer to the instruction manual provided with your specific aftermarket radio for detailed operating instructions, including setting up stations, adjusting audio settings, and utilizing advanced features.
7. 유지관리
The Metra 95-2009 dash kit requires minimal maintenance. Periodically inspect the mounting screws for tightness and ensure the trim ring remains securely in place. Clean the plastic components with a soft, damp 옷감. 가혹한 화학 물질이나 연마성 세제를 사용하지 마십시오.
8. 문제 해결
- 라디오 전원이 켜지지 않음: Check the vehicle's fuse box and the radio's inline fuse. Verify all power and ground connections are secure.
- 소리 없음: Ensure all speaker wires are correctly connected and not shorted. Check the radio's audio settings.
- Poor Fit of Dash Kit: Double-check that all necessary tabs were removed from the kit components and that the radio is properly aligned within the brackets.
- 느슨한 연결: Re-examine all wiring connections for tightness and proper insulation.
9. 사양
- 상표: 메트라
- 모델 번호: 95-2009
- 재료: 플라스틱
- 항목 치수(L x W x H): 14 x 7 x 3.5 인치
- 품목 무게: 6.4 온스
- 호환성: Select 1990-2012 GM, Honda, Isuzu, Suzuki vehicles
- 장착 유형: Double DIN / Stacked ISO DIN
10. 보증 및 지원
This product is covered by a double DIN dash kit warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact Metra Electronics Corp directly. You can also visit the official Metra web추가 리소스 및 연락처 정보는 사이트를 참조하십시오.
Figure 10.1: Metra - The Installer's Choice
