InSinkErator F-C1100C

InSinkErator F-C1100C 냉수 디스펜서 수도꼭지 사용 설명서

Model: F-C1100C | Finish: Chrome

1. 서론

Thank you for choosing the InSinkErator F-C1100C Cold Water Dispenser Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. The F-C1100C is designed to deliver cold drinking water directly at your kitchen sink when paired with a compatible InSinkErator cold water tank, such as the CWT-00 model. Its elegant chrome finish and high-arching spout complement various kitchen decors.

2. 안전 정보

Please read all instructions carefully before installing or using this product. Failure to follow these instructions may result in property damage or personal injury.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

InSinkErator F-C1100C cold water dispenser faucet in chrome finish.

그림 1: InSinkErator F-C1100C Cold Water Dispenser Faucet. This image displays the InSinkErator F-C1100C cold water dispenser faucet. It features a high-arching spout and a single lever handle, all in a polished chrome finish. The design is transitional, suitable for various kitchen decors.

4. 사양

제조업체InSinkErator
모델 번호F-C1100C
부품 번호F-C1100C
색상크롬
마치다크롬
재료놋쇠
스타일과도기적
품목 무게1 파운드
제품 치수3.56 x 11.31 x 18.82 인치
설치 방법싱글 홀 데크 마운트
장착 유형데크 마운트
손잡이 재질놋쇠

5. 설치

This faucet requires a standard single-hole deck mount installation. It is designed to connect to a separate cold water tank (e.g., InSinkErator CWT-00) for chilled water delivery. Refer to the cold water tank's instruction manual for its specific installation requirements.

도구 및 재료 (포함되지 않음):

설치 단계:

  1. 장착 구멍을 준비하세요: Ensure a standard 1-3/8 inch (35mm) diameter hole is available on your sink or countertop. If drilling a new hole, follow the sink or countertop manufacturer's instructions.
  2. 수도꼭지 장착:
    • Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet.
    • Insert the faucet shank through the mounting hole.
    • From underneath the sink, slide the rubber washer, then the metal washer, and finally thread the mounting nut onto the faucet shank.
    • Hand-tighten the nut, then use a basin wrench or adjustable wrench to secure it firmly, ensuring the faucet is properly aligned. Do not overtighten.
  3. 급수관 연결:
    • Connect the faucet's cold water inlet line to the outlet of your InSinkErator cold water tank (e.g., CWT-00). Refer to the tank's manual for specific connection points.
    • Use Teflon tape on threaded connections to ensure a watertight seal.
    • Ensure all connections are hand-tight, then tighten an additional 1/4 to 1/2 turn with a wrench.
  4. 누출 확인:
    • 주요 물 공급장치를 천천히 켜세요.
    • Inspect all connections for any signs of leaks. Tighten connections as necessary.
    • Allow water to run through the faucet for a few minutes to flush out any debris.

6. 운영

The InSinkErator F-C1100C faucet is designed for simple, hands-free operation to dispense cold water.

7. 유지관리

Proper care and maintenance will ensure the longevity and appearance of your InSinkErator F-C1100C faucet.

8. 문제 해결

If you encounter issues with your F-C1100C faucet, refer to the following common problems and solutions:

문제가능한 원인해결책
물 흐름이 없거나 매우 약합니다.
  • 상수도 공급이 중단되었습니다.
  • Cold water tank is off or empty
  • 에어레이터가 막혔습니다
  • 수도관이 꼬이거나 막혔습니다
  • Ensure main water supply is on
  • Check cold water tank power and water level; refer to tank manual
  • 통풍장치 청소 또는 교체
  • Inspect water lines for kinks or obstructions
Water leaking from faucet base
  • 느슨한 장착 너트
  • 손상된 O링 또는 씰
  • Tighten mounting nut (do not overtighten)
  • Contact InSinkErator support for replacement parts or service
Water leaking from connections under sink
  • 느슨한 연결
  • 나사산이 제대로 밀봉되지 않았습니다.
  • Tighten connections with a wrench
  • Disassemble, reapply Teflon tape, and reassemble connections

9. 보증 및 지원

For detailed warranty information, please refer to the documentation included with your product or visit the official InSinkErator website. If you require technical assistance or replacement parts, please contact InSinkErator customer support.

자세한 정보와 지원 리소스는 다음 사이트를 방문하여 확인할 수 있습니다. InSinkErator Store on Amazon.

관련 문서 - F-C1100C

사전view InSinkErator Instant Hot Water Dispenser: Installation, Care & Use Guide
Comprehensive guide for installing, caring for, and using your InSinkErator Instant Hot Water Dispenser. Includes system requirements, safety information, troubleshooting tips, and warranty details for models like Iris™ and Melea™.
사전view InSinkErator 인스턴트 온수 디스펜서: 설치, 관리 및 사용 설명서
InSinkErator 순간 온수기 설치, 관리 및 사용에 대한 종합 안내서입니다. H/HC3300, GN/HC1100, GN/HC2215, GN/HC2200 모델 및 관련 필터 시스템에 대한 안전 정보, 문제 해결 방법 및 보증 정보를 포함합니다.
사전view InSinkErator 인스턴트 온수 디스펜서 문제 해결 가이드 및 설명서
InSinkErator 순간 온수기 관련 종합 문제 해결 가이드입니다. 물 흐름 저하, 누수, 온도 문제 등 일반적인 문제 해결 방법을 알아보세요. 보증 정보 및 교체 절차도 포함되어 있습니다.
사전view InSinkErator 인스턴트 온수 디스펜서: 설치, 관리 및 사용 설명서
HWT-F1000S, GN/HC 시리즈 등의 모델에 대한 설치, 작동, 유지관리, 안전 지침, 보증 및 문제 해결 방법을 다루는 InSinkErator 인스턴트 온수 디스펜서의 포괄적인 사용 설명서입니다.
사전view InSinkErator 인스턴트 온수 디스펜서 사용 설명서: 설치, 관리 및 사용
InSinkErator 순간 온수기 설치, 관리 및 사용에 대한 종합 안내서입니다. HWT-F1000S, HWT-HP, HWT-00, GN/HC1100, GN/HC2200, GN/HC2215, H/HC3300 모델에 적용됩니다. 안전 정보, 문제 해결 방법 및 보증 정보가 포함되어 있습니다.
사전view InSinkErator Instant Warm Handwash System Installation, Care & Use Manual
This manual provides comprehensive instructions for the installation, care, and use of the InSinkErator Instant Warm Handwash System (WASH-2). It covers system requirements, safety precautions, step-by-step installation guides, troubleshooting, and warranty information.