1. 서론
Thank you for choosing Moen. This manual provides detailed instructions for the installation, operation, and maintenance of your Moen T2701BN Level Posi-Temp Valve Trim Kit. This trim kit is designed to complement the modern aesthetic of your bathroom while providing reliable temperature and flow control. Please read these instructions carefully before beginning installation to ensure proper function and to avoid damage.
2. 안전 정보
- 배관 작업을 시작하기 전에 항상 주 수도 공급을 차단하세요.
- 설치하는 동안 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 자격을 갖춘 배관공에게 문의하세요.
- 모든 연결 부분이 안전하게 되어 누출을 방지하세요.
- This trim kit requires a compatible Moen Posi-Temp pressure-balancing valve (포함되지 않음). Ensure you have the correct valve body installed (e.g., 2510, 2590, 2570, or 2520 series).
3. 패키지 내용
설치하기 전에 모든 구성 요소가 있는지 확인하세요.
- 레버 핸들
- Escutcheon Plate (Wall Plate)
- Handle Adapter/Mechanism
- 장착 하드웨어(나사, 개스킷)
- 설치 가이드(본 문서)
메모: The Posi-Temp pressure-balancing valve body is sold separately and is not included with this trim kit.
This image displays the Moen T2701BN Level Posi-Temp Valve Trim Kit, featuring its single lever handle and escutcheon plate in a brushed nickel finish. The design is modern and sleek, intended for shower or tub installations.
4. 필요한 도구
- 조절 렌치
- Phillips 헤드 스크루 드라이버
- Hex Wrench (size may vary, typically 7/64 inch or 3/32 inch, refer to specific valve instructions)
- Plumber's Putty or Silicone Sealant (optional, for escutcheon plate)
- 청소용 천
5. 설치 지침
These instructions assume a compatible Moen Posi-Temp valve body is already installed in the wall. Refer to the valve body's specific installation manual for rough-in details.
- 밸브를 준비하세요: Ensure the water supply to the valve is turned off. Remove any existing trim components.
- 에스커천 플레이트를 설치하십시오: Position the escutcheon plate over the valve body opening. Ensure the plate is level. Secure it to the wall using the provided screws. Do not overtighten. For a watertight seal, a thin bead of silicone sealant can be applied around the perimeter of the plate before securing.
- 핸들 어댑터를 설치하세요: Slide the handle adapter onto the valve stem. Ensure it is properly seated.
- 손잡이 부착: Place the lever handle onto the handle adapter. Secure the handle to the adapter using the small set screw, typically located on the underside of the handle. Use the appropriate hex wrench.
- 누수 및 기능 테스트: Turn the main water supply back on. Slowly open the valve by moving the handle. Check for any leaks around the escutcheon plate and handle. Verify that the handle rotates smoothly to control temperature and flow.
6. 사용 설명서
The Moen T2701BN Level Posi-Temp Valve Trim Kit features a single lever handle for controlling both water temperature and flow.
- 켜기/끄기: Rotate the handle away from the wall to turn on the water. Rotate it back towards the wall to turn off the water.
- 온도 조절: Rotate the handle counter-clockwise for warmer water and clockwise for cooler water. The Posi-Temp valve maintains consistent water temperature even with pressure fluctuations in the water supply.
- 흐름 조정: The flow rate is controlled by how far the handle is rotated away from the wall.
7. 유지관리
To maintain the beautiful finish of your Moen T2701BN trim kit, follow these cleaning guidelines:
- 부드러운 천으로 닦아주세요amp 옷감.
- Use only mild soap and water.
- Avoid abrasive cleaners, harsh chemicals, or polishes, as these can damage the brushed nickel finish and void the warranty.
- Regular cleaning will help prevent water spots and mineral buildup.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Water leaks from handle or escutcheon. | Loose connections, damaged O-rings/gaskets, improper installation. | Ensure all screws are tightened. Check for proper seating of gaskets. If leaks persist, the valve cartridge may need inspection or replacement (refer to valve body manual). |
| No water or low water flow. | Main water supply off, debris in valve, clogged aerator (if applicable to showerhead/spout). | Check main water supply. Consult valve body manual for cartridge inspection. |
| Temperature difficult to adjust or inconsistent. | Valve cartridge issue, temperature limit stop setting. | Refer to the Posi-Temp valve body manual for instructions on adjusting the temperature limit stop or inspecting the cartridge. |
9. 사양
- 모델 번호: 티2701BN
- 상표: 모엔
- 마치다: 브러시드 니켈
- 재료: 황동(손잡이), 니켈(마감)
- 핸들 수 : 1
- 장착 유형: 벽걸이형
- Compatible Valve: Moen Posi-Temp Pressure-Balancing Valve (sold separately)
- 품목 무게: 약 1.3파운드
10. 보증 정보
Moen products are manufactured under the highest standards of quality and workmanship. Moen offers a limited lifetime warranty to the original consumer purchaser against leaks, drips, and finish defects for as long as the original consumer purchaser owns their home. Other components are warranted for a period of one year from the date of purchase. For complete warranty details, please visit the official Moen web해당 웹사이트를 방문하거나 Moen 고객 서비스 센터에 문의하십시오.
11. 지원 및 연락처
If you require further assistance or have questions regarding your Moen T2701BN Level Posi-Temp Valve Trim Kit, please contact Moen customer support:
- Web대지: www.moen.com
- 핸드폰: 모엔을 참조하세요. web지역 연락처 사이트.
Please have your model number (T2701BN) and date of purchase available when contacting support.
