Pelican 4100N

Pelican 4100N Nemo Dive Series Light Instruction Manual

모델: 4100N

소개

The Pelican 4100N Nemo Dive Series Light is a robust and reliable illumination tool designed for underwater environments. Constructed with an ABS body, polycarbonate lens, and thermoplastic shroud, it offers corrosion-proof and chemical-resistant performance. This manual provides essential information for the safe and effective use of your dive light.

안전 정보

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

설정

1. 배터리 설치

  1. Unscrew the rear cap of the light by turning it counter-clockwise.
  2. Carefully remove the internal battery module.
  3. Insert 8 D alkaline cells into the battery module, ensuring correct polarity as indicated inside the module.
  4. Reinsert the battery module into the light body.
  5. Screw the rear cap back on, turning clockwise until securely tightened. Ensure the O-ring is clean and properly seated to maintain the waterproof seal.

2. Reflector Selection and Installation

The Pelican 4100N includes two interchangeable reflectors:

To change reflectors:

  1. Unscrew the front bezel of the light.
  2. Carefully remove the currently installed reflector.
  3. Select the desired reflector and place it into position.
  4. Ensure the backup lamp is securely stored behind the reflector.
  5. Screw the front bezel back on, turning clockwise until securely tightened.

작동 지침

1. 조명 켜기/끄기

The light features a dual-direction switch, designed for easy operation even with thick gloves.

2. Pistol Grip/Lantern Handle Adjustment

The integrated pistol grip/lantern handle can be quickly converted to multiple positions for enhanced flexibility and comfort during use. Adjust the handle to your preferred position by rotating or pivoting it as needed.

3. 수중 사용

The Pelican 4100N Nemo Dive Series Light is submersible to a depth of 500 feet (approximately 152 meters). Always ensure all caps and bezels are securely tightened before entering the water.

Pelican 4100N Nemo Dive Series Light in yellow, showing the pistol grip handle and front lens.

Image: The Pelican 4100N Nemo Dive Series Light, featuring its robust design and ergonomic pistol grip handle. This image illustrates the overall appearance of the dive light, highlighting its yellow casing and the front lens assembly.

유지

문제 해결

문제가능한 원인해결책
조명이 켜지지 않습니다.Dead or incorrectly installed batteries. Switch in locked position.Replace batteries, ensuring correct polarity. Unlock the switch.
빛의 광선이 어둡습니다.Low battery power. Dirty lens.Replace batteries. Clean the lens.
Water inside the light.Improperly sealed cap/bezel. Damaged O-ring.Immediately open the light, remove batteries, and allow to dry. Inspect and replace O-rings if damaged. Ensure all seals are clean and properly seated before reassembly.

명세서

모델 번호4100-007-244X
광원 유형기호 엑스 에
루멘스251루멘
배터리 유형8 D alkaline cells
배터리 소모 시간12시간
잠수정 수심500피트(약 152미터)
재료Acrylonitrile Butadiene Styrene (ABS) body, Polycarbonate lens, Thermoplastic shroud
색상노란색
치수(패키지)24.89 x 14.48 x 13.72cm
무게(패키지)1.02kg

보증 및 지원

Pelican Products offers an unconditional lifetime guarantee on its products. Pelican products will be replaced or you will be refunded on any dissatisfaction, through the original dealer.

This lifetime guarantee covers defects in workmanship. Please note that the guarantee does ~ 아니다 l을 덮어라amp or batteries. Furthermore, the guarantee does not cover damage resulting from shark bite, bear attack, or misuse by children under 5 years of age.

For support or warranty claims, please contact your original dealer or visit the official Pelican Products web추가 지원은 사이트를 참조하세요.