1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the Jung UAE8UPOK6 Network Outlet Insert. This product is designed to provide a reliable network connection point within your electrical system. Please read this manual thoroughly before proceeding with installation or use.
2. 안전 정보
WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician or a person with appropriate electrical knowledge and experience.
- Always disconnect power at the main circuit breaker before installing or servicing electrical devices.
- 설치하는 동안 모든 지역 및 국가 전기 규정을 준수하세요.
- 젖어 있거나 d인 곳에는 설치하지 마십시오.amp 위치.
- 기기 또는 연결된 장비의 손상을 방지하기 위해 배선 연결이 올바른지 확인하십시오.
- 설치에 적합한 도구를 사용하십시오.
3. 패키지 내용
패키지에 다음 품목이 포함되어 있는지 확인하십시오.
- Jung UAE8UPOK6 Network Outlet Insert (1 unit)
누락되거나 손상된 품목이 있는 경우 즉시 공급업체에 문의하십시오.
4. 설정 및 설치
The Jung UAE8UPOK6 Network Outlet Insert is designed for screw-in installation into a standard electrical wall box. Follow these steps for proper installation:
- 전원 차단: Before beginning, ensure the power supply to the installation area is completely disconnected at the main circuit breaker.
- 배선 준비: Carefully strip the outer jacket of your network cable (e.g., Cat5e, Cat6) to expose the individual twisted pairs. Do not strip the insulation from the individual wires.
- 전선 연결: Refer to the color codes marked on the insert's terminals. The insert supports standard network wiring configurations. Insert each individual wire into its corresponding terminal according to the desired wiring standard (e.g., T568A or T568B). The image below illustrates the terminal layout and color markings. Secure the wires firmly.
- Mount the Insert: Place the network outlet insert into the wall box. Use the provided screws to secure the insert firmly to the wall box.
- Install Faceplate (Optional): If using a decorative faceplate (sold separately), attach it according to its specific instructions.
- 복원력 : 설치가 완료되고 모든 연결이 안전하게 이루어지면 주 회로 차단기에서 전원을 다시 켜십시오.
Figure 1: Jung UAE8UPOK6 Network Outlet Insert. This image displays the Jung UAE8UPOK6 network outlet insert. It features an RJ45 port in the center for network cable connection. Around the port, there are clearly marked terminals with color codes (e.g., Bl/Br, Or/Gr) for precise wiring according to network standards. The insert is designed for screw-in installation into a standard electrical box.
5. 사용 설명서
Once the Jung UAE8UPOK6 Network Outlet Insert is correctly installed and power is restored, it functions as a standard network connection point.
- 네트워크 케이블을 연결하십시오: Insert a standard RJ45 network cable from your device (e.g., computer, printer, smart TV) into the RJ45 port on the front of the installed insert.
- 연결 확인: Ensure the cable clicks securely into place. Most network devices will indicate a successful connection with an LED light on the device or the network card.
6. 유지관리
The Jung UAE8UPOK6 Network Outlet Insert requires minimal maintenance.
- 청소: To clean the surface, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the plastic or internal components.
- 점검: Periodically inspect the insert for any signs of physical damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
7. 문제 해결
If you experience issues with your network connection through the Jung UAE8UPOK6 Network Outlet Insert, consider the following:
- 네트워크 연결 없음:
- Ensure the network cable is securely plugged into both the device and the outlet insert.
- Verify that the other end of the network cable (connected to your router/switch) is also secure and functional.
- Check the network cable for any visible damage. Try a different cable if available.
- Confirm that the network equipment (router, switch) is powered on and functioning correctly.
- If you suspect a wiring issue, disconnect power and have a qualified electrician inspect the internal connections of the insert.
- 네트워크 속도가 느립니다:
- Ensure you are using appropriate network cables (e.g., Cat5e or Cat6 for higher speeds).
- Check your network equipment and internet service provider for potential bottlenecks.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 정 |
| 모델 번호 | UAE8UPOK6 |
| 제품 크기(L x W x H) | 8.51cm x 8cm x 5.99cm |
| 무게 | 140.61그램 |
| 재료 | 플라스틱 |
| 색상 | 은 |
| 설치 유형 | 스크류 인 |
| 원산지 | 프랑스 |
| 국제 물품 코드 | 04011377987739 |
9. 보증 및 지원
For information regarding warranty coverage and technical support for your Jung UAE8UPOK6 Network Outlet Insert, please refer to the documentation provided with your purchase or visit the official Jung web고객 서비스 연락처는 일반적으로 제조업체에서 확인할 수 있습니다. web대지.
