소개
This manual provides detailed instructions for the installation, operation, and maintenance of your KOHLER Margaux Rite-Temp Bath and Shower Faucet Trim with Lever Handle (Model K-T16233-4-BN). Please read all instructions carefully before beginning installation to ensure proper function and to avoid injury or product damage. Keep this manual for future reference.
중요한 안전 정보
- 수도꼭지를 설치하거나 정비하기 전에 항상 주 물 공급을 차단하세요.
- 설치하는 동안 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 자격을 갖춘 배관공에게 문의하세요.
- 모든 지역 배관 및 건축 규정을 준수하십시오.
- 연결 부위를 너무 세게 조이지 마십시오. 손상될 수 있습니다.
Required Rite-Temp® Valve System
This faucet trim requires a 1/2" pressure-balancing valve with a push-button diverter. For optimal performance, ensure you select the correct valve for your shower trim application.
영상: Selection guide for KOHLER Rite-Temp Valve Systems. The K-11748-K-NA valve is typically used in residential applications. The K-11748-KS-NA valve includes screwdriver stops for water shut-off during service or maintenance and is typically used in hospitality or multi-family applications.
- K-11748-K-NA: Typically used in residential applications.
- K-11748-KS-NA: Includes screwdriver stops, allowing water to be shut off at the valve for service or maintenance. Typically used in hospitality or multi-family applications.
설치 지침
- 설치 영역 준비: Ensure the rough-in valve (e.g., K-11748-K-NA or K-11748-KS-NA) is correctly installed according to its specific instructions and local plumbing codes. The valve body should be securely mounted and plumb.
- Install the Trim Plate: Apply a bead of silicone sealant around the back of the trim plate to create a watertight seal against the finished wall. Position the trim plate over the valve body and secure it with the provided screws.
- 핸들 어셈블리를 설치하십시오: Attach the handle adapter to the valve stem. Align the lever handle with the adapter and secure it with the set screw, typically located on the underside of the handle.
- Install the Showerhead and Tub Spout: Thread the shower arm into the wall fitting and then attach the showerhead. For the tub spout, apply thread sealant to the pipe threads and screw the spout onto the pipe, ensuring it is properly aligned and tightened.
- 누출 테스트: Turn on the main water supply and check all connections for leaks. Operate the faucet handle to ensure proper water flow and temperature control.
Note: Specific installation steps may vary slightly depending on the rough-in valve model and your specific plumbing configuration. Always refer to the detailed instructions provided with your KOHLER Rite-Temp valve.
Operating Your Faucet Trim
- 켜기/끄기: Rotate the lever handle to turn the water on or off.
- 온도 조절: Rotate the lever handle to adjust the water temperature. Typically, rotating counter-clockwise increases hot water, and clockwise increases cold water.
- 다이버터 기능: The Rite-Temp valve system includes a push-button diverter. Pull the button to divert water flow from the tub spout to the showerhead. Push the button back in to return water flow to the tub spout.
관리 및 유지 보수
To maintain the finish and performance of your KOHLER faucet trim, follow these guidelines:
- 청소: Clean the faucet trim with a soft, damp 천을 사용하십시오. 연마성 세제, 독한 화학 물질 또는 수세미는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 얼룩 제거: 잘 지워지지 않는 얼룩은 순한 비눗물에 적신 후 깨끗이 헹구고 부드러운 천으로 물기를 닦아내세요.
- Avoid Wax-Based Cleaners: Do not use cleaners containing wax, as they can build up and dull the finish.
- 샤워헤드 청소: Periodically clean the showerhead nozzles to remove mineral deposits. Many KOHLER showerheads feature flexible nozzles that can be rubbed to dislodge deposits.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 낮은 물 흐름 | 샤워기 노즐이나 에어레이터가 막혔습니다. | Clean showerhead nozzles. Remove and clean the aerator (if applicable). |
| 수온 변동 | Issue with the Rite-Temp pressure-balancing valve. | Consult the Rite-Temp valve installation guide or contact KOHLER customer service. |
| Leaks from Handle or Trim Plate | 연결 부분이 느슨하거나 씰이 손상되었습니다. | Ensure all connections are tight. Inspect and replace seals or O-rings if damaged. |
| Diverter Not Functioning | Debris in diverter mechanism or worn parts. | Inspect diverter for obstructions. If issue persists, contact a qualified plumber or KOHLER support. |
명세서
- 상표: 코엘러
- 모델 번호: T16233-4-BN
- 색상: 활기찬 브러시드 니켈
- 재료: Brass (Handle Material), Nickel (Faucet Material)
- 마감 유형 : 닦았다
- 핸들 수 : 1
- 장착 유형: 벽걸이형
- 품목 무게: 5 파운드
- 포함된 구성 요소: Margaux Rite-Temp Bath and Shower Faucet Trim with Lever Handle
- 한국어: 650531483454
Product Features Video: Katalyst Air-Induction Spray
동영상: This video demonstrates the KOHLER Katalyst Air-Induction Full-Coverage Spray technology, showcasing how air is infused into the water droplets to create a more voluminous and consistent shower experience.
보증 및 지원
This KOHLER product is covered by a 평생 제한 보증. For detailed warranty information, service, or technical support, please contact KOHLER customer service directly. You can find contact information on the official KOHLER web사이트를 참조하거나 제품에 포함된 설명서를 참조하세요.
