Wahl Professional Super Taper II Corded Clipper User Manual

소개

The Wahl Professional Super Taper II Corded Clipper is a high-performance hair cutting tool designed for versatile use. It features a powerful V5000 motor and an adjustable blade, suitable for various hair cutting needs.

패키지 내용:

• Wahl Professional Super Taper II Corded Clipper
• 8 Attachment Combs (various lengths)
• 청소용 브러시
• 블레이드 오일
• 작동 지침
• 블레이드 가드
• 스타일링 빗

Image: Wahl Professional Super Taper II Corded Clipper, showing its silver and black design with the power cord.

Image: The Wahl Super Taper II Corded Clipper highlighting its features such as the adjustable taper lever, powerful electromagnetic V5000 motor, and suitability for tapering, fades, and blends.

Image: A visual representation of all items included in the Wahl Super Taper II Corded Clipper package, including the clipper, various colored guide combs, cleaning brush, oil, and styling comb.

중요한 안전 정보

To reduce the risk of electric shock, injury, or damage, please read all instructions before using this appliance.

• 물에 빠진 가전제품을 만지지 마십시오. 즉시 플러그를 뽑으십시오.
• 목욕 중이나 샤워 중에는 사용하지 마십시오.
• 제품이 떨어지거나 욕조 또는 싱크대에 끌려 들어갈 수 있는 곳에 두거나 보관하지 마십시오.
• 물이나 기타 액체에 넣거나 떨어뜨리지 마십시오.
• 항상 사용 후에는 즉시 전기 콘센트에서 기기를 뽑아두세요.
• 부품을 청소, 장착 또는 제거하기 전에 이 제품의 플러그를 뽑으십시오.
• 이 기기를 어린이 또는 병약자가 사용하거나, 어린이 또는 병약자 근처에서 사용할 경우 면밀한 감독이 필요합니다.
• 이 설명서에 설명된 대로 가정용으로만 이 기기를 사용하십시오.
• 제조업체가 권장하지 않는 부속품은 사용하지 마십시오.
• 코드 나 플러그가 손상되었거나 제대로 작동하지 않거나 떨어 졌거나 손상된 경우에는이 기기를 작동하지 마십시오.
• 코드를 뜨거운 표면에서 멀리 두세요.
• 어떠한 구멍에도 물건을 떨어뜨리거나 넣지 마십시오.
• 실외에서 사용하거나 에어로졸(스프레이) 제품을 사용하거나 산소를 공급하는 곳에서는 작동하지 마십시오.
• 부상을 입을 수 있으므로 손상되거나 부러진 빗과 함께 이 제품을 사용하지 마십시오.
• Before storing, make sure the cord is not twisted or kinked.

설정 및 초기 사용

짐 풀기:

Carefully remove the clipper and all accessories from the packaging. Inspect the clipper for any visible damage. Ensure all listed components are present.

Blade Adjustment (Zero-Gapping):

For closer cutting, the blades can be adjusted. This process, known as "zero-gapping," involves aligning the cutting blade closer to the bottom blade.

1. Loosen the two screws on the clipper blade slightly.
2. Carefully push the bottom blade closer to the cutting blade. Ensure the cutting blade does not extend beyond the bottom blade to prevent skin irritation.
3. Maintain a slight, barely visible gap between the two blades.
4. Hold the bottom blade firmly by its sides and carefully tighten the screws.
5. Turn the clipper on for a few seconds, then off, to check blade alignment. If misaligned (e.g., the far left tooth of the cutting blade should overlap with the 2nd tooth of the bottom blade), repeat the adjustment process.
6. If the blades are aligned but the clipper behaves strangely, adjust the power screw on the side of the clipper until optimal performance is achieved.

주의: A zero-gapped clipper cuts very close. Always ensure the blade is flat against the scalp to avoid nicks or cuts.

작동 지침

전원 켜기/끄기:

Plug the clipper into a suitable electrical outlet. Use the power switch located on the side of the clipper to turn it on or off.

부착 빗 사용:

The clipper comes with 8 color-coded attachment combs for various cutting lengths. To attach a comb, align it with the clipper blade and push until it securely snaps into place. Ensure the comb is firmly attached before use to prevent it from detaching during a haircut.

Image: A set of colorful Wahl guide combs, used to achieve different hair cutting lengths.

조정 가능한 테이퍼 레버:

The adjustable taper lever allows for fine-tuning cutting lengths without changing attachment combs. Moving the lever up (closed) provides a shorter cut, while moving it down (open) provides a longer cut. This feature is useful for blending and tapering.

Hair Cutting Tips:

• Always start with a longer comb length than desired and gradually reduce it.
• Cut against the direction of hair growth for an even cut.
• 매끄럽고 겹치는 획을 사용하세요.
• For self-haircuts, use multiple mirrors to ensure accuracy, especially for the back of the head.

유지

블레이드 청소:

After each use, turn off and unplug the clipper. Use the provided cleaning brush to remove any loose hair from the blades. Regular cleaning prevents hair buildup and ensures optimal performance.

칼날에 기름칠하기:

Oiling the blades is crucial for maintaining clipper performance, reducing friction, preventing pulling and snagging, and protecting against rust. Wahl's high-carbon blades benefit significantly from regular oiling.

1. Ensure the clipper is clean and free of hair.
2. Apply a drop of Wahl clipper oil to each corner of the top blade.
3. Apply a drop of oil to the foot of the blade (the part that moves against the stationary blade).
4. Turn the clipper on for a few seconds to allow the oil to distribute evenly across the blades.
5. 깨끗한 천으로 여분의 기름을 닦아냅니다.

Oiling is recommended after every few haircuts, or whenever the clipper feels sluggish or starts to pull hair.

저장:

When not in use, store the clipper unplugged, away from moisture, and with the blade guard in place to protect the blades.

문제 해결

명세서

• 모델 번호: 84701
• 상표: Wahl 전문가
• 전원: 코드식 전기
• 모터: V5000 Electromagnetic Motor
• 블레이드 유형: Adjustable High-Carbon Steel Blades
• 색상: 실버 & 블랙
• 품목 무게: 1 파운드
• 제품 크기: 12 x 4 x 6 인치
• GTIN(UPC): 043917847016

보증 및 지원

보증 정보:

The Wahl Professional Super Taper II Corded Clipper comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

고객 지원:

For technical assistance, troubleshooting, or warranty service, please contact Wahl Professional customer service. Contact details can typically be found on the Wahl Professional web사이트 또는 원래 제품 포장에 보관하십시오.