1. 서론
Thank you for choosing the Monacor MAK-12P Active Monitor Speaker System. This high-capacity active speaker is designed to deliver excellent sound characteristics for various audio applications. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. 안전 지침
- 전원 공급 장치: 전원 공급 장치 볼륨을 확인하십시오.tage matches the requirements specified on the device (230 V ~ / 50 Hz).
- 통풍: 환기구를 막지 마십시오. 과열을 방지하기 위해 장치 주변에 충분한 공기 흐름을 확보하십시오.
- 수분: Keep the speaker away from water, moisture, and high humidity. Do not operate with wet hands.
- 놓기: Place the speaker on a stable, level surface. Avoid direct sunlight, heat sources, and strong vibrations.
- 청소: Disconnect from power before cleaning. Use a dry, soft cloth. Do not use liquid cleaners.
- 서비스: 직접 기기를 수리하려고 하지 마십시오. 모든 수리는 자격을 갖춘 기술자에게 맡기십시오.
- 케이블 : 전원 코드가 밟히거나 끼지 않도록 보호하세요.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인해 주십시오.
- Monacor MAK-12P Active Monitor Speaker System
- 전원 케이블
- 사용 설명서 (본 문서)
4. 제품 오버view
The MAK-12P is an active monitor speaker system featuring a high-quality amplifier module and optimally matched speaker components. It includes a specially developed 30 cm (12-inch) woofer and a piezo horn tweeter, housed in a black plastic cabinet.
주요 특징:
- 180 WMAX / 100 WRMS power amp리퍼
- 30 cm (12-inch) woofer
- Piezo horn tweeter
- 베이스 부스트 기능
- Low Cut function
- Input attenuator (-6dB)
- Multiple protection circuits
- Robust black plastic cabinet
5. 설정
- 놓기: Position the speaker on a stable surface or speaker stand. Ensure it is placed in a location that allows for optimal sound projection and adequate ventilation.
- 전원 연결: Connect the supplied power cable to the speaker's power input and then to a suitable 230 V ~ / 50 Hz power outlet. Ensure the speaker's power switch is in the "OFF" position before connecting.
- 오디오 입력 연결:
- For balanced input, use XLR cables to connect your audio source (e.g., mixer, microphone) to the XLR input connectors on the speaker. The speaker features 2 x XLR (in/out) connections.
- 모든 연결이 안전한지 확인하세요.
- 초기 전원 켜기: Once all connections are made, switch the speaker's power to the "ON" position. The power indicator light should illuminate.
- 볼륨 조절: Start with the input attenuator (gain control) set to its minimum position before playing any audio to avoid sudden loud sounds.
6. 사용 설명서
- 전원 켜기/끄기: Use the main power switch located on the rear panel to turn the speaker on or off.
- Input Attenuator (-6dB): This control adjusts the input sensitivity. Rotate clockwise to increase the input level, and counter-clockwise to decrease it. Adjust this to match the output level of your audio source.
- 베이스 부스트 : Engage this function to enhance low-frequency response, providing a fuller bass sound.
- 로우 컷: Activate the Low Cut filter to remove unwanted low-frequency rumble or feedback, which can improve clarity, especially in live sound applications.
- 모니터링: Position the speaker to provide clear audio monitoring for performers or for general audience sound reinforcement.
- 데이지 체인: The XLR output allows you to connect (daisy-chain) another active speaker or send the signal to another audio device.
7. 유지관리
- 청소: Regularly wipe the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes.
- 저장: If storing the speaker for an extended period, ensure it is kept in a dry, dust-free environment.
- 점검: 주기적으로 모든 케이블과 연결부를 점검하여 마모 또는 손상 여부를 확인하십시오. 손상된 케이블은 즉시 교체하십시오.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 사운드 출력이 없습니다 |
|
|
| 왜곡된 소리 |
|
|
| 전원 표시등 없음 |
|
|
이러한 해결 방법을 시도한 후에도 문제가 지속되면 자격을 갖춘 서비스 담당자에게 문의하세요.
9. 기술 사양
| 모델 | MAK-12P |
| Amplifier 힘 | 180 WMAX / 100 WRMS |
| 주파수 범위 | 50~20,000Hz |
| 입력 | 0.775 V / 50 kΩ (balanced) |
| 사이 | 2 x XLR (in / out) |
| SPL(1W/1m) | 94데시벨 |
| Rated SPL | 114데시벨 |
| 주변 온도 | 0~40도 |
| 전원 공급 장치 | 230 V ~ / 50 Hz / 180 VA |
| 치수(폭 x 높이 x 깊이) | 570 x 385 x 325mm |
| 무게 | 23.1kg |
10. 보증 및 지원
Monacor products are manufactured to the highest quality standards. For warranty information and support, please refer to the warranty card included with your purchase or visit the official Monacor web사이트. 직접 장치를 수리하려고 시도하지 마십시오. 보증이 무효화될 수 있습니다.
For technical assistance or service inquiries, please contact your local Monacor dealer or authorized service center.
