소개
Thank you for choosing the Beka T&T Exacto Timer with Thermometer. This device is designed to assist you in precise cooking by monitoring temperatures and timing processes. It features a durable stainless steel construction and a clear LCD display. Please read this manual carefully before using the product to ensure proper operation and longevity.
Image of the Beka T&T Exacto Timer with Thermometer, showing its stainless steel body and digital display.
설정
- 배터리 설치: Locate the battery compartment on the back of the unit. Insert the required batteries (not included) according to the polarity indicators (+/-). Close the compartment securely.
- 프로브 연결: Connect the stainless steel temperature probe cable into the designated port on the side or back of the main unit. Ensure a firm connection.
- 초기 배치: Place the main unit on a stable surface or use its integrated stand/magnet (if available) for convenient viewing. Ensure the probe cable is not kinked or exposed to direct heat sources beyond its intended use.
작동 지침
The Beka T&T Exacto Timer with Thermometer offers both temperature monitoring and timing functions.
온도 측정
- 전원 켜기: The device typically powers on automatically once batteries are installed and the probe is connected. Note that this model may not feature a dedicated power switch; to turn off, the battery may need to be removed.
- 단위 선택: Use the “°C/°F” button to switch between Celsius and Fahrenheit temperature readings.
- 프로브 삽입: Carefully insert the stainless steel probe into the center of the food item you wish to measure, avoiding bones or fat. For liquids, ensure the probe tip is fully submerged.
- 온도 측정: The current temperature will be displayed on the LCD screen. The device can measure temperatures up to 250 °C (482 °F).
타이머 기능
- 타이머 설정 : Use the “MIN” and “SEC” buttons to set the desired countdown time. The timer can be programmed up to 99 minutes and 59 seconds.
- 타이머 시작: 카운트다운을 시작하려면 "START/STOP" 버튼을 누르세요.
- 일시 정지/재개: Press “START/STOP” again to pause or resume the timer.
- 타이머 재설정: To reset the timer, press and hold the “MIN” and “SEC” buttons simultaneously, or press the “CLEAR” button if available.
- 경보: An audible alarm will sound when the countdown reaches zero. Press any button to silence the alarm.
유지
- 청소: 부드러운 천으로 본체를 닦으세요.amp cloth. Do not immerse the main unit in water. The stainless steel probe can be cleaned with warm, soapy water. Ensure the probe is completely dry before storage.
- 저장: Store the timer and probe in a clean, dry place when not in use. Avoid extreme temperatures and humidity.
- 배터리 교체: Replace batteries when the display becomes dim or the device stops functioning correctly. Always use the recommended battery type.
문제 해결
- 화면이 표시되지 않거나 기기가 켜지지 않음:
- 배터리 설치를 확인하고 극성이 올바른지 확인하세요.
- 오래되었거나 소모된 배터리는 새 배터리로 교체하세요.
- 프로브가 단단히 연결되었는지 확인하십시오.
- 부정확한 온도 측정값:
- Ensure the probe tip is fully inserted into the center of the food item and not touching bone or the bottom of a pan.
- 프로브 케이블이 손상되지 않았는지 확인하십시오.
- Test the thermometer in boiling water (100 °C / 212 °F at sea level) or ice water (0 °C / 32 °F) to check calibration. If readings are consistently off, the probe or unit may require replacement.
- 타이머가 작동하지 않습니다:
- 배터리가 새것이고 올바르게 설치되었는지 확인하세요.
- Check that the time is set correctly before starting the countdown.
명세서
| 모델 번호 | 16303094 |
| 상표 | Beka |
| 치수(길이 x 너비 x 높이) | 18.7 x 9 x 2.8cm(7.36 x 3.54 x 1.1인치) |
| 무게 | 117.93g(0.26파운드) |
| 외장재 | 스테인리스 스틸 |
| 디스플레이 유형 | 액정표시장치 |
| 온도 범위 | 최대 250°C(482°F) |
| 타이머 범위 | 최대 99분 |
| 전원 | 배터리 작동 |
| 포함된 구성 요소 | 온도 프로브 |
| 특징 | 타이머 기능 |
보증 및 지원
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Beka web추가 지원은 사이트를 참조하세요.
