소개
This manual provides essential information for the proper setup, operation, and maintenance of your Tascam CD-GT2 Guitar Trainer. Please read this manual thoroughly before using the unit to ensure optimal performance and longevity.
중요한 안전 정보
- 본 제품을 비나 습기에 노출시키지 마십시오.
- c를 열지 마세요asing; 자격을 갖춘 인력에게 서비스를 의뢰하세요.
- Use only the specified power adapter (DC IN 5V) or batteries.
- 장치를 열원 근처나 직사광선에 노출시키지 마십시오.
- Do not leave batteries in the unit for extended periods when not in use to prevent leakage.
패키지 내용
패키지에 다음 품목이 포함되어 있는지 확인하십시오.
- Tascam CD-GT2 Guitar Trainer Unit
- 사용 설명서 (본 문서)
- 전원 코드
- Remote Control (if applicable to your model variant)
유닛 오버view
Familiarize yourself with the various parts and controls of your CD-GT2.
전면 패널 및 컨트롤
이미지: 상단 view of the Tascam CD-GT2, showing the display, control buttons (Tempo, Key, Guitar Cancel, Effect, Tuner, Loop, Play/Pause, Stop, Flash Back), cursor buttons, value buttons, and Phones Volume knob.
- 디스플레이 화면: Shows track information, tempo, key, and effect settings. Note: The display screen is compact.
- 템포 버튼: Adjusts playback speed.
- 키 버튼: Changes the playback pitch without altering tempo.
- GUITAR CANCEL Button: Reduces the level of the guitar part in a CD track.
- 효과 버튼: Accesses and adjusts built-in guitar effects.
- 튜너 버튼: Activates the chromatic tuner.
- 루프 버튼: Sets and repeats a specific section of a track.
- PLAY/PAUSE, STOP, FLASH BACK Buttons: Standard CD player controls.
- CURSOR Buttons: 메뉴와 설정을 탐색하세요.
- VALUE Buttons: Adjust parameter values.
- PHONES VOLUME Knob: Controls headphone output level.
측면 및 후면 패널
이미지: 측면 view of the Tascam CD-GT2 with the CD tray open, showing the PHONES, LINE OUT, INPUT (GUITAR/MIC IN), and FOOT SW jacks.
- 스위치 열기: CD 수납부 덮개를 풀어줍니다.
- 전화 잭: 3.5mm stereo mini-jack for connecting headphones.
- 라인 아웃 잭: 외부 장치에 연결하려면 ampliifier 또는 녹음 장치.
- INPUT (GUITAR/MIC IN) Jack: 6.3mm mono jack for connecting a guitar or microphone.
- 풋 SW 잭: For connecting an optional footswitch for hands-free control.
이미지: 후면 view of the Tascam CD-GT2, showing the DC IN 5V power input and the POWER button.
- DC 입력 5V: Power input jack for the included AC adapter.
- 전원 버튼: 기기를 켜거나 끄려면 1초 동안 길게 누릅니다.
설정
- 전원 연결:
- AC 어댑터 : Connect the supplied AC adapter to the DC IN 5V jack on the rear panel and plug it into a wall outlet.
- 배터리: Alternatively, open the battery compartment on the bottom of the unit and insert four AA batteries, observing correct polarity.
- 켜기/끄기: Press and hold the POWER button on the rear panel for approximately 1 second.
- CD 로드:
- Slide the OPEN switch to release the CD compartment lid.
- Place a standard audio CD onto the spindle with the label side facing up.
- Gently close the CD compartment lid until it clicks securely.
- Connecting Headphones/Amp정수기:
- For private practice, connect headphones to the PHONES jack. Adjust volume using the PHONES VOLUME knob.
- To output audio to an external amplifier or recording device, connect a cable from the LINE OUT jack.
- Connecting an Instrument/Microphone: Plug your guitar or a microphone into the INPUT (GUITAR/MIC IN) jack.
- Connecting a Footswitch (Optional): Connect a compatible footswitch to the FOOT SW jack for remote control of certain functions.
작동 지침
기본 CD 재생
- Load an audio CD as described in the Setup section.
- Press the PLAY/PAUSE button to start playback. The unit may take a few moments to read a new CD before starting.
- Use the SKIP buttons (left/right arrows) to navigate between tracks.
- Press the STOP button to halt playback.
- The FLASH BACK button allows you to quickly rewind a few seconds during playback.
템포 컨트롤
The TEMPO function allows you to slow down or speed up the CD playback without changing the pitch, ideal for learning fast passages.
- During CD playback, press the TEMPO button.
- Use the VALUE buttons (up/down arrows) to adjust the tempo percentage. A lower percentage slows down the track.
- Note: Significant tempo reduction (e.g., below -50%) may introduce a slight "warbling" or distortion effect, which is a characteristic of the digital processing.
Key Control (Pitch Shift)
The KEY function allows you to change the pitch of the CD playback in semitone steps without altering the tempo, useful for matching your instrument's tuning or playing in different keys.
- During CD playback, press the KEY button.
- Use the VALUE buttons to adjust the key up or down in semitone increments.
- Adjusting the key by a full step (+1 or -1) corresponds to a half-step in musical terms (e.g., E to E-flat).
루프 재생
Use the LOOP function to repeatedly play a specific section of a song, aiding in focused practice.
- During CD playback, press the LOOP button at the desired start point (A).
- Press the LOOP button again at the desired end point (B). The section between A and B will now loop continuously.
- To exit loop playback, press the LOOP button a third time.
Guitar Cancel
The GUITAR CANCEL feature attempts to reduce the level of the guitar part in a CD track, making it easier to play along.
- Press the GUITAR CANCEL button to activate/deactivate the function.
- Note: This function works best on tracks where the guitar is centrally panned and may not completely eliminate the guitar sound.
효과
The CD-GT2 includes various built-in effects for your guitar input.
- Press the EFFECT button to cycle through available effects or enter effect editing mode.
- Use the CURSOR and VALUE buttons to select and adjust effect parameters.
- It is recommended to start with preset effects before attempting extensive customization.
튜너 및 메트로놈
- 조율사: Press the TUNER button to activate the chromatic tuner for your guitar. Follow the display to tune your instrument.
- 메트로놈: The unit also features a metronome function. Refer to the on-screen prompts and use the CURSOR/VALUE buttons to set tempo and beat.
유지
- 청소: Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or solvents. For the CD lens, use a specialized CD lens cleaner if necessary.
- CD 관리: CD는 가장자리를 잡고 다루세요. 깨끗하게 유지하고 흠집이 나지 않도록 하세요.
- 배터리 제거: If the unit will not be used for an extended period, remove the AA batteries to prevent potential leakage and damage.
- 감자: If experiencing unusual audio artifacts or magnetic interference, gently wipe the unit with a clean, soft cloth to help demagnetize it.
문제 해결
| 문제 | 가능한 원인 / 해결책 |
|---|---|
| 장치의 전원이 켜지지 않습니다. |
|
| CD does not play or takes a long time to start. |
|
| Audio is distorted or "warbles" at slow tempos. | This is a characteristic artifact of extreme tempo reduction in digital audio processing. It is more noticeable at very low tempo settings. Try reducing the tempo less drastically. |
| Guitar Cancel function is ineffective. | The effectiveness of Guitar Cancel varies depending on the original recording. It works best when the guitar is isolated in the stereo mix. It may not completely remove the guitar. |
| 디스플레이를 읽기 어렵습니다. | The display screen is compact. Ensure adequate lighting and adjust your view잉 각도. |
| 헤드폰/라인 출력에서 소리가 나지 않습니다. |
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | CD-GT2 |
| 제품 치수 | 1.52 x 7.64 x 5.43 인치 |
| 품목 무게 | 1.21파운드 |
| 전원 | 4 AA batteries or DC IN 5V (AC adapter) |
| 연결 기술 | Auxiliary (PHONES, LINE OUT, GUITAR/MIC IN, FOOT SW) |
| 특징 | Portable CD Guitar Trainer with Tempo/Key Control, Loop, Tuner, Metronome, Effects |
보증 정보
Specific warranty details for the Tascam CD-GT2 are typically provided with the product at the time of purchase or can be found on the official Tascam web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
지원 및 서비스
For technical support, service, or further inquiries regarding your Tascam CD-GT2, please visit the official Tascam website or contact their customer service department. Contact information can usually be found on the Tascam web사이트 또는 제품에 포함된 설명서에서 확인하세요.