1. 서론
This manual provides essential instructions for the safe and efficient assembly, setup, and maintenance of your Sealey SM3002ST Lathe Stand. This stand is designed to provide stable support for Sealey metalworking lathes and mill/drills, specifically models SM3002, SM2502, and SM2503. Please read this manual thoroughly before assembly and use, and retain it for future reference.
2. 안전 지침
신체 부상과 장비 손상을 방지하기 위해 항상 다음 안전 예방 조치를 준수하세요.
- 모든 지침 읽기: Familiarize yourself with the stand's components and assembly steps before beginning.
- 안정적인 표면: Ensure the stand is assembled and placed on a level, stable, and non-slip surface capable of supporting the combined weight of the stand and the machine mounted on it.
- 적절한 조립: Assemble the stand strictly according to the instructions provided. Do not modify the stand in any way.
- 안전한 장착: Always ensure the lathe or mill/drill is securely fastened to the stand using appropriate hardware.
- 중량 용량: Do not exceed the recommended weight capacity of the stand. Refer to the specifications section.
- 작업 영역 정리: Keep the area around the stand clear of obstructions and debris.
- 어린이와 구경꾼: 어린이와 허가받지 않은 사람을 작업장에 접근시키지 마십시오.
3. 패키지 내용
모든 구성품을 조심스럽게 꺼내 아래 목록과 대조해 보십시오. 누락되거나 손상된 부품이 있으면 즉시 공급업체에 문의하십시오.
- Sealey SM3002ST Lathe Stand components (legs, cross-members, sliding tool shelf, hardware)
Image 3.1: Sealey SM3002ST Lathe Stand
조립된 view of the Sealey SM3002ST Lathe Stand, showing its robust construction and design.
4. 조립
Follow these steps to assemble your Sealey SM3002ST Lathe Stand.
4.1. 필요한 도구
- 조정 가능한 렌치 또는 소켓 세트
- Screwdriver (if applicable for shelf attachment)
4.2. 조립 단계
- Identify all components: legs, cross-members, sliding tool shelf, and all fasteners (bolts, nuts, washers).
- Attach the lower cross-members to the legs. Ensure all bolts are finger-tight at this stage.
- Attach the upper cross-members to the legs. Again, keep bolts finger-tight.
- Once all structural components are in place, carefully stand the frame upright.
- Diagonally tighten all bolts securely. Do not overtighten.
- Install the sliding tool shelf onto its designated runners or brackets. Ensure it slides smoothly.
- Verify that the stand is stable and all connections are secure before proceeding to setup.
5. 설정
Proper placement and securing of your machine are crucial for safe operation.
5.1. Stand Placement
- Choose a location with adequate space around the stand for safe operation of the lathe or mill/drill.
- Ensure the floor is level and capable of supporting the total weight.
- If necessary, use shims to level the stand.
5.2. Attaching the Lathe/Mill/Drill
- Carefully lift your Sealey SM3002, SM2502, or SM2503 machine onto the top surface of the stand. It is recommended to have assistance for this step due to the weight of the machines.
- Align the mounting holes on the machine with the corresponding holes on the stand's top plate.
- Secure the machine to the stand using appropriate bolts, washers, and nuts (not supplied with the stand, typically provided with the machine). Ensure all fasteners are tightened securely to prevent movement during operation.
6. 운영
The SM3002ST stand provides a stable base and convenient storage for your metalworking machine.
6.1. Sliding Tool Shelf
- The integrated sliding tool shelf offers convenient storage for tools, accessories, and small parts within easy reach during operation.
- Ensure that items placed on the shelf do not interfere with the operation of the machine or create a hazard.
- 선반에 물건을 너무 많이 올리지 마세요.
7. 유지관리
Regular maintenance will ensure the longevity and safe operation of your stand.
- 청소: Wipe down the stand regularly with a clean, damp 천을 사용하여 먼지와 이물질을 제거하세요. 연마성 세제는 사용하지 마세요.
- 점검: Periodically check all bolts and fasteners for tightness. Retighten as necessary.
- 안정성 확인: Ensure the stand remains stable and level. Adjust shims if required.
- 손상: Inspect the stand for any signs of damage, such as bent components or cracks. If damage is found, discontinue use and replace affected parts or the entire stand if necessary.
8. 문제 해결
This section addresses common issues you might encounter with the stand.
- 서 있을 때 흔들림:
- Check if the stand is on a level surface. Use shims if needed.
- 모든 조립 볼트가 단단히 조여졌는지 확인하세요.
- Machine Not Secure:
- Verify that the machine's mounting bolts are correctly installed and fully tightened.
- Ensure the machine is compatible with the stand (SM3002, SM2502, SM2503).
- Sliding Shelf Sticking:
- Clean the shelf runners to remove any debris or dust.
- Apply a small amount of dry lubricant if necessary.
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | SM3002ST |
| 호환성 | Sealey SM3002, SM2502, SM2503 Lathes/Mill/Drills |
| 전체 크기(W x D x H) | 800 x 355 x 880 mm (약 31.5 x 14 x 34.6 인치) |
| 품목 무게 | 4.41 lbs (2 kg approx.) |
| 포함된 구성 요소 | Lathe Stand (assembly required) |
10. 보증 및 지원
This Sealey product comes with a 1-year guarantee. For specific terms and conditions, please refer to the official Sealey warranty documentation or contact Sealey customer support.
Image 10.1: Sealey 1 Year Guarantee
The Sealey brand logo accompanied by a '1 Year Guarantee' badge, indicating the product's warranty period.
For technical support, spare parts, or warranty claims, please contact your authorized Sealey dealer or visit the official Sealey web대지.
