Teknetics T2 Classic Metal Detector User Manual

소개

This manual provides instructions for the assembly, operation, and maintenance of the Teknetics T2 Classic Metal Detector. The T2 Classic is a high-performance, multi-purpose metal detector designed for various applications including coin shooting, relic hunting, and gold prospecting. It incorporates advanced electronic technology and a user-friendly interface for efficient metal detection.

제품 끝view

주요 특징

• Handheld design suitable for various environments.
• Dual-filter discrimination modes for effective target separation in challenging areas.
• Trigger-actuated Fast Grab™ for instant ground cancellation.
• Manual ground cancellation option for precise coil balance.
• Depth detection capability for coins up to 15 inches.
• Magnetic mineralization bar graph for identifying specific metal types.

구성 요소

The Teknetics T2 Classic consists of several key components:

• Control Housing with LCD Display
• Search Coil (11-inch)
• 하부 스템
• 윗줄기
• 팔걸이
• 핸들
• 배터리 칸

그림 1: 조립된 view of the Teknetics T2 Classic Metal Detector, showing the control housing, search coil, stem, and armrest. The control housing features a large LCD screen and control buttons.

그림 2: 클로즈업 view of the Teknetics T2 Classic's LCD display, showing target identification numbers, discrimination settings, sensitivity, hum level, manual ground cancellation, and menu options.

설정

집회

1. Attach the lower stem to the search coil using the provided bolt and washers. Ensure a snug fit.
2. Insert the lower stem into the upper stem. Adjust the length to a comfortable operating position and secure with the locking collar.
3. Slide the control housing onto the upper stem.
4. Attach the armrest to the upper stem.
5. Wrap the search coil cable securely around the stem, leaving enough slack for coil movement, and plug the connector into the control housing.

배터리 설치

The Teknetics T2 Classic requires 4 AA batteries.

1. Locate the battery compartment on the control housing.
2. 배터리 덮개를 엽니다.
3. 배터리 4개를 넣고, 배터리 칸 안쪽에 표시된 극성(+/-)을 잘 확인하세요.
4. 배터리 덮개를 단단히 닫으세요.

작동 지침

전원 켜기/끄기

To power on the detector, press and hold the power button located on the control housing. To power off, press and hold the power button again until the unit shuts down.

기본 동작

Once powered on, the detector will perform a self-test. The LCD screen will display various parameters.

• 감광도: Adjust sensitivity to optimize depth and minimize false signals. Higher sensitivity increases depth but can also increase noise.
• 용량: 오디오 출력 레벨을 조절하세요.
• 한계점: Set the background hum level in All Metal mode.

LCD 디스플레이 이상view

The large LCD screen provides critical information during operation:

• 대상 ID: A numerical value (0-99) indicating the probable identity of the detected target.
• 깊이 표시기: 목표물의 깊이를 추정합니다.
• Mineralization Bar Graph: Displays the level of ground mineralization.
• 메뉴 시스템: Allows access to various settings and modes.

차별 모드

Using Discrimination

The T2 Classic features dual-filter discrimination modes to help filter out unwanted metallic objects (trash) while searching for desirable targets.

1. Access the discrimination settings via the menu.
2. Adjust the discrimination level to reject specific types of metals. Lower settings will accept more targets, including iron, while higher settings will reject more ferrous and some non-ferrous items.
3. Experiment with different discrimination levels in your search area to find the optimal balance between target detection and trash rejection.

Ground Cancellation

Fast Grab™ Ground Cancellation

The trigger-actuated Fast Grab™ feature allows for quick and automatic ground balancing. This is essential for stable operation and accurate target identification, especially in mineralized ground.

1. Hold the search coil parallel to the ground and pump it up and down from 6 inches to 1 inch above the ground.
2. While pumping, press and hold the trigger. The detector will automatically adjust to the ground conditions.
3. Release the trigger once the ground balance is stable.

Manual Ground Cancellation

For more precise ground balancing, the T2 Classic offers a manual ground cancellation option. This allows for fine-tuning the ground balance to specific soil conditions.

1. Enter the manual ground cancellation menu.
2. Adjust the ground balance setting incrementally while pumping the coil over the ground until the audio response is smooth and consistent.

대상 식별

Interpreting Target ID

The Target ID number on the LCD screen provides a numerical indication of the detected metal's conductivity. Different metals will typically produce different ID ranges.

• 낮은 수치(예: 0-20): 종종 철 또는 작은 철제 물체를 나타냅니다.
• Mid numbers (e.g., 20-60): Can indicate foil, nickel, pull tabs, or small gold items.
• High numbers (e.g., 60-99): Typically indicate copper, silver, or larger brass objects.

Magnetic Mineralization Bar Graph

This graph provides a visual representation of the ground's magnetic mineralization. Understanding this can help in distinguishing between ground signals and actual targets, especially in highly mineralized areas.

유지

청소

사용 후에는 감지기를 광고로 닦아주세요.amp 옷감. 연마성 세척제나 용제를 사용하지 마십시오.

저장

Store the detector in a dry, cool place. Remove batteries if the detector will not be used for an extended period to prevent leakage.

Search Coil Care

The search coil is waterproof, but the control housing is not. Avoid submerging the control housing. Protect the search coil from impacts.

문제 해결

일반적인 문제 및 솔루션

전원이 없습니다

• 배터리 설치를 확인하고 배터리가 새 것인지 확인하세요.
• 배터리함 덮개가 제대로 닫혀 있는지 확인하십시오.

Erratic Signals or False Alarms

• Re-perform ground cancellation.
• 감도 설정을 낮추세요.
• Check for nearby electromagnetic interference (power lines, other electronics).
• Ensure search coil cable is wrapped tightly around the stem.

깊이 감지 기능 불량

• Increase sensitivity, if ground conditions allow.
• Ensure proper ground balance.
• 배터리 잔량을 확인하십시오.

명세서

Teknetics T2 Classic Metal Detector

보증 및 지원

보증 정보

For specific warranty details, please refer to the warranty card included with your product or contact Teknetics customer service.

고객 지원

If you require assistance or have questions regarding your Teknetics T2 Classic Metal Detector, please visit the official Teknetics web해당 웹사이트를 방문하거나 고객 지원 부서에 문의하십시오.

Teknetics Official Store on Amazon