1. 제품 오버view
The Lutron Diva DVSCELV-300P-BI is a 300-watt single pole electronic low-voltage dimmer designed to control lighting from one location. It features a large paddle switch for on/off control and a linear slider for precise dimming adjustments. This dimmer is specifically for use with electronic low-voltage lighting applications. It allows users to adjust light levels, contributing to energy savings and creating desired room atmospheres. Wallplates are sold separately.
2. 안전 정보
- 경고 : 감전 위험. May result in serious injury or death. Turn OFF power at the circuit breaker or fuse box before installing.
- 모든 국가 및 지역 전기 규정에 따라 설치하십시오.
- 이 지침의 일부에 대해 확실하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하십시오.
- Do not use with standard incandescent, magnetic low-voltage, or fluorescent lighting. This dimmer is for electronic low-voltag전자 응용 프로그램에만 해당.
- 총 와트를 보장tage of the connected lighting does not exceed 300 watts.
3. 패키지 내용
- Lutron Diva DVSCELV-300P-BI Dimmer
- Wire connectors (various colors, typically yellow and blue)
- 설치 가이드
Note: Wallplate is not included and must be purchased separately.
4. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | DVSCELV-300P-BI |
| 왓tage | 300 와트 |
| 운영 볼륨tage | 120 볼트 |
| 회로 유형 | Single Pole (1-way) |
| 애플리케이션 | 전자 저용량tag전자(ELV) |
| 치수(길이 x 너비 x 높이) | 1.75 x 2.2 x 4.25 인치 |
| 색상 | 비스킷 |
| 제어 방법 | Paddle Switch with Linear Slider |
| 재료 | 구리(접촉 재료) |
5. 설치
Before beginning installation, ensure you have turned off power at the circuit breaker. This dimmer is designed for single-pole applications where the light is controlled from one switch. A neutral wire connection is typically required for proper operation.
5.1. 준비
- 전원 끄기: Locate your circuit breaker panel and turn off the power to the light switch you are replacing.
- 전원이 꺼져 있는지 확인: Flip the existing switch on and off to confirm the power is disconnected.
- Remove existing wallplate and switch: Unscrew the wallplate and then the mounting screws holding the old switch in place. Carefully pull the switch out from the wall box.
- 전선 식별: Note the connections of the existing wires. Typically, a single-pole switch will have two load/line wires and a ground wire. Some dimmers may require a neutral wire (usually white).
이미지: 앞면 view of the Lutron Diva DVSCELV-300P-BI Electronic Low-Voltage Dimmer, showing the paddle switch and linear slider.
이미지: 측면 view of the Lutron Diva DVSCELV-300P-BI Dimmer, illustrating the pre-stripped wires for connection.
5.2. Wiring the Dimmer
The Lutron Diva DVSCELV-300P-BI dimmer typically has three wires: a green wire (ground), a black wire (hot/line), and a yellow wire (load). Some models may also include a white wire (neutral).
- 접지선: Connect the green wire from the dimmer to the bare copper or green ground wire in the wall box using a wire connector.
- 핫/라인 와이어: Connect the black wire from the dimmer to the incoming hot/line wire from the circuit breaker (often black or red) using a wire connector.
- 부하 와이어: Connect the yellow wire from the dimmer to the load wire that goes to the light fixture (often black or red) using a wire connector.
- Neutral Wire (if applicable): If your dimmer has a white wire and your wall box has a neutral wire bundle (usually white wires twisted together), connect the white dimmer wire to the neutral bundle using a wire connector. If no neutral wire is present in the wall box, cap off the white wire from the dimmer with a wire connector.
Video: This video demonstrates the wiring process for a single-pole dimmer with one black, one yellow, and one white wire, which is applicable to the Lutron Diva DVSCELV-300P-BI. It covers connecting the ground, hot, load, and neutral wires.
5.3. 설치 완료
- Secure the dimmer: Carefully push all wires back into the wall box. Mount the dimmer to the wall box using the provided screws.
- Attach wallplate: Install the coordinating wallplate (sold separately) over the dimmer.
- 전원 복구: Return to your circuit breaker panel and turn the power back on.
Image: The Lutron Diva DVSCELV-300P-BI Dimmer installed in a wall, ready for use.
6. 운영
- 조명 켜기/끄기: Press the large paddle switch to turn the connected lights on or off.
- 밝기 조정: Use the linear slider located next to the paddle switch to adjust the light level. Slide up for brighter lights and down for dimmer lights.
- Preset Dimming: The dimmer will return to the previously set light level when turned back on.
Image: A hand demonstrating the operation of the Lutron Diva DVSCELV-300P-BI Dimmer, highlighting the paddle switch and linear slider.
7. 유지관리
- 청소: Clean the dimmer and wallplate with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 사용자가 수리할 수 없는 부품: 디머 내부에는 사용자가 수리할 수 있는 부품이 없습니다. 장치를 열거나 수리하려고 하지 마십시오.
8. 문제 해결
| 문제 | 가능한 원인 / 해결책 |
|---|---|
| 표시등이 켜지지 않습니다. |
|
| 전등이 깜빡거리거나 윙윙거립니다. |
|
| 밝기 조절기가 제대로 작동하지 않습니다. |
|
9. 보증 및 지원
For warranty information, technical support, or further assistance, please visit the official Lutron website or contact Lutron customer service. Keep your purchase receipt for warranty claims.
Lutron Support: 루트론닷컴/지원
