Samson SP01 스파이더 마운트 사용 설명서

1. 서론

The Samson SP01 Spider Mount is a high-quality shock mount designed to enhance audio recording by isolating microphones from unwanted vibrations. This manual provides essential information for the proper setup, operation, and maintenance of your SP01 Spider Mount.

2. 주요 특징

• 진동 차단: Designed to isolate the microphone from physical vibrations, floor noise, and stand noise, contributing to clearer audio recordings.
• 견고한 구조: Constructed from metal for durability and reliable support.
• 특정 호환성: Engineered for seamless integration with designated Samson condenser microphones.

3. Compatible Microphones

The Samson SP01 Spider Mount is compatible with the following Samson condenser microphones:

• 샘슨 C01
• 샘슨 C03
• Samson CL7
• Samson CL8
• 삼손 C01U

For optimal performance, ensure your microphone model is listed above.

4. 설정 및 설치

Follow these steps to properly attach your Samson SP01 Spider Mount to a microphone stand and install your compatible microphone.

4.1 마이크 스탠드에 부착하기

1. Identify the threaded adapter on your microphone stand. The SP01 mount typically uses a standard thread size.
2. Screw the base of the SP01 Spider Mount onto the microphone stand until it is securely fastened. Ensure it is tight enough to prevent wobbling but do not overtighten.

Image: The Samson SP01 Spider Mount shown attached to a microphone stand, illustrating its typical setup.

4.2 마이크 설치

1. Gently open the spring-loaded clamps of the Spider Mount.
2. Carefully insert your compatible Samson condenser microphone into the mount, ensuring it is centered and held firmly by the elastic bands.
3. cl을 풀어주세요amps, allowing the elastic bands to securely cradle the microphone. The elastic suspension system is crucial for isolating vibrations.

이미지: 클로즈업 view of a microphone being carefully placed into the elastic suspension of the Samson SP01 Spider Mount.

5. 작동 및 조정

The Samson SP01 Spider Mount allows for flexible positioning of your microphone.

• 각도 조정: Use the knob on the side of the mount to loosen, adjust the microphone to your desired angle, and then tighten to secure its position.
• 진동 감소: The primary function of the Spider Mount is to reduce unwanted vibrations transmitted through the microphone stand. Ensure the elastic bands are intact and properly tensioned for effective isolation.

6. 유지관리

To ensure the longevity and optimal performance of your Samson SP01 Spider Mount, follow these maintenance guidelines:

• 청소: Wipe the metal frame with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• 고무줄: Periodically inspect the elastic bands for signs of wear, stretching, or breakage. Worn bands may reduce the mount's effectiveness in isolating vibrations. Replacement bands can be sourced from authorized Samson dealers.
• 저장: When not in use, store the mount in a clean, dry environment to prevent damage.

7. 문제 해결

If you experience issues with your Samson SP01 Spider Mount, consider the following:

• 과도한 진동 소음:
  • 마이크가 고무줄 안에 제대로 고정되었는지 확인하십시오.
  • Check if the elastic bands are worn or broken and replace them if necessary.
  • Verify that the mount is securely tightened to the microphone stand.
• Microphone Slipping:
  • Confirm that your microphone is one of the compatible models.
  • Ensure the elastic bands are providing adequate tension.

8. 사양

9. 보증 및 지원

보증 정보 및 기술 지원에 대해서는 Samson Technologies 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

추가 리소스 및 제품 정보는 다음을 방문하세요. SAMSON Store on Amazon.