Dickson TM320

Dickson TM320 Temperature and Humidity Data Logger

사용 설명서

1. 서론

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

  • USB Enabled Download: Easily transfer recorded data to a computer.
  • Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
  • Jumbo Display: Clear and easy-to-read real-time measurements.
  • 사용하기 쉽습니다: Intuitive interface for straightforward operation.

2. 안전 정보

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

  • Do not expose the device to extreme temperatures outside its specified operating range.
  • Avoid direct contact with water or high humidity environments beyond the non-condensing range.
  • 지정된 전원 및 액세서리만 사용하세요.
  • 기기를 직접 열거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • Dickson TM320 Data Logger
  • 사용 설명서(본 문서)
  • USB Cable (may be sold separately)
  • SD Card (may be sold separately)
  • Batteries (may be pre-installed or included)

4. 제품 오버view

앞쪽 view of Dickson TM320 Data Logger with display showing '0.0' and battery indicator.

그림 4.1: 전면 View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

옆 view of Dickson TM320 Data Logger showing USB port, sensor input, and ventilation slots.

그림 4.2: 측면 View 포트와 함께. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

뒤쪽에 view of Dickson TM320 Data Logger showing battery compartment and mounting holes.

그림 4.3: 뒤로 View. Displays the battery compartment cover and keyhole slots for wall mounting.

맨 위 view of Dickson TM320 Data Logger showing the SD card slot.

그림 4.4: 상단 View. Shows the slot for inserting an SD card for data storage and transfer.

5. 설정

5.1. 배터리 설치

  1. 장치 뒷면에서 배터리 구획을 찾으세요(그림 4.3 참조).
  2. 배터리 커버를 밀어서 엽니다.
  3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
  4. 배터리 덮개를 단단히 닫으세요.

5.2. 초기 전원 켜기

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. 장치 장착

The TM320 can be placed on a flat surface or mounted on a wall:

  • 표면 배치: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
  • 벽면 장착: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. 운영

6.1. 디스플레이 이해하기

The jumbo display provides real-time information:

  • 현재 읽기: Shows the live temperature or humidity value.
  • 단위: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
  • 배터리 표시기: 남은 배터리 수명을 표시합니다.
  • 채널(채널): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. 버튼 기능

  • 최소/최대 버튼: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
  • 알람 버튼: 를 눌러주세요 view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
  • 저장 버튼: Press to manually save a data point.

6.3. 데이터 로깅

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. 알람 설정

The device features audio/visual alarms for out-of-range conditions.

  1. 를 누르고 계세요 경보 button until the alarm setting mode is activated.
  2. 사용하세요 MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
  3. 사용하세요 구하다 button to adjust the alarm threshold values.
  4. 누르다 경보 다시 한 번 확인하여 설정 모드를 종료하십시오.

6.5. Data Download (USB)

  1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
  2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's web소프트웨어 사이트).
  3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

  1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
  2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
  3. Remove the SD card and insert it into a computer's card reader to access the data.

7. 유지관리

7.1. 청소

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. 배터리 교체

Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

7.3. 보관

When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

8. 문제 해결

문제가능한 원인해결책
장치의 전원이 켜지지 않습니다.배터리가 방전되었거나 잘못 설치되었습니다.배터리 극성을 확인하고 새 배터리로 교체하세요.
No data is being logged.Device not powered on; memory full; logging paused.Ensure device is on; download data to clear memory; check software settings for logging status.
Display shows 'Err' or abnormal readings.Sensor malfunction; out of range conditions.Move device to a stable environment; contact support if error persists.
Cannot download data via USB.Incorrect cable; driver issue; software not installed.Ensure correct USB cable; install necessary drivers/software from Dickson web대지.
알람이 울리지 않습니다.Alarm disabled; volume too low; thresholds set incorrectly.Check alarm settings (Section 6.4); ensure alarm is enabled and thresholds are appropriate.

9. 사양

특징세부 사항
모델 번호TM320
온도 범위-4 ~ 158°F(-20 ~ 70°C)
습도 범위0-95% RH (비응축)
제조업체Dickson Unigage Inc.
제품 치수19.56 x 16.51 x 8.89cm(7.7 x 6.5 x 3.5인치)
제품 무게385.55g(0.85파운드)
데이터 전송USB, Flash Card (SD)
표시하다점보 LCD

10. 보증 및 지원

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Web대지: www.dicksonlogger.com

관련 문서 - TM320

사전view Dickson TSB/TWE/TWP 터치스크린 데이터 로거 빠른 시작 가이드
Dickson TSB/TWE/TWP 터치스크린 데이터 로거에 대한 빠른 시작 가이드로, 설정, 이더넷 또는 Wi-Fi를 통한 연결, DicksonOne 플랫폼과의 통합에 대한 내용을 다룹니다.
사전view DICKSON 프로세스 로거 HT350: 사용자 가이드 및 설정
DICKSON 프로세스 로거 HT350의 설정, 사용 및 문제 해결에 대한 포괄적인 가이드로, 소프트웨어 설치, 데이터 로깅 및 보증 정보가 포함되어 있습니다.
사전view Dickson SP125, SP175, TP125 환경 데이터 로거 설명서
Dickson SP125, SP175, TP125 환경 데이터 로거에 대한 종합적인 사용 설명서입니다. 정확한 데이터 기록 및 모니터링을 위한 기능, 사양, 교정, DicksonWare 소프트웨어, 그리고 작동법을 다룹니다.
사전view DBL 데이터 로거 빠른 시작 가이드 - 딕슨
Dickson DBL 데이터 로거에 대한 빠른 시작 가이드로, 설정, DicksonWare 2.0 구성, 로깅, 데이터 다운로드 및 펌웨어 정보 등을 다룹니다.
사전view TSB 터치스크린 데이터 로거 사용 설명서 - Dickson
Dickson TSB 터치스크린 데이터 로거 사용 설명서에는 설치, USB를 통한 데이터 다운로드, 스크린샷 저장, 알람, 그래프 표시, 화면 잠금과 같은 장치 설정 구성 방법이 자세히 설명되어 있습니다.
사전view Dickson DWE 인터넷 연결 데이터 로거 빠른 시작 가이드
이 빠른 시작 가이드는 Dickson DWE 인터넷 연결 데이터 로거의 설정 및 연결 방법을 안내하여 사용자가 이더넷 또는 Wi-Fi 연결을 시작하고 DicksonOne 플랫폼에 장치를 등록하여 온라인 데이터를 수집할 수 있도록 지원합니다. view경보 및 알람 구성.