Graphtec IJ-91001MBK Matte Black Ink Cartridge User Manual

1. 서론

This manual provides essential instructions for the safe and effective use of your Graphtec IJ-91001MBK Matte Black Ink Cartridge. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your printer and ink cartridge.

2. 제품 오버view

The Graphtec IJ-91001MBK is a genuine Matte Black ink cartridge designed for specific Graphtec large-format printers. It contains 130ml of high-quality pigment-based ink, formulated to deliver sharp, durable, and fade-resistant prints.

Figure 2.1: Graphtec IJ-91001MBK Matte Black Ink Cartridge. This image displays the ink cartridge packaging, highlighting the matte black color and Graphtec branding.

3. 호환성

This ink cartridge is compatible with the following Graphtec printer models:

• Graphtec JW331
• Graphtec JW330
• Graphtec JW350
• Graphtec JW501
• Graphtec JW500
• Graphtec JW550

Using this cartridge with incompatible models may result in damage to the printer or poor print quality.

4. 설정 및 설치

Follow these general steps to install the Graphtec IJ-91001MBK ink cartridge. Refer to your specific printer's user manual for detailed, model-specific instructions.

1. 프린터 준비: Ensure your printer is powered on and in a ready state. Open the ink cartridge access cover.
2. 오래된 카트리지를 제거합니다(해당되는 경우): If replacing an empty cartridge, gently press the release tab and pull the old cartridge straight out. Dispose of it responsibly according to local regulations.
3. 새 카트리지 풀기: Carefully remove the new Graphtec IJ-91001MBK ink cartridge from its packaging. Avoid touching the electrical contacts or the ink nozzle.
4. 부드럽게 흔들어주세요: Gently shake the cartridge horizontally a few times to distribute the ink evenly.
5. Remove Protective Cap/Seal: Remove any protective tape or cap from the ink cartridge as indicated in your printer's manual. Be careful not to spill any ink.
6. 새 카트리지를 삽입하세요: Align the new cartridge with the correct slot in the printer. Push it firmly until it clicks into place. Ensure it is securely seated.
7. 덮개 닫기: Close the ink cartridge access cover. The printer may perform an initial ink charging or alignment process.
8. 설치 확인: 프린터의 디스플레이 또는 상태 표시등을 확인하여 새 잉크 카트리지가 인식되어 사용할 준비가 되었는지 확인하십시오.

5. 사용 설명서

Once the Graphtec IJ-91001MBK ink cartridge is correctly installed, your printer is ready to produce high-quality prints. Follow your printer's standard operating procedures for printing documents or images.

• 인쇄 설정: For optimal results with matte black ink, ensure your printer's software settings are configured for the appropriate media type and print quality.
• 잉크 레벨: Monitor ink levels through your printer's utility software. Replace the cartridge when the low ink warning appears to avoid interruptions during critical print jobs.
• 프린트 헤드 청소: If print quality degrades (e.g., streaks, missing lines), perform a print head cleaning cycle through your printer's maintenance menu.

6. 유지관리

Proper maintenance ensures consistent print quality and extends the life of your ink cartridge and printer.

• 저장: Store unused ink cartridges in their original sealed packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
• 손질: Handle cartridges carefully to prevent damage to the nozzle or electrical contacts.
• 정기적 사용: Use your printer regularly to prevent ink from drying out in the print head nozzles. If the printer is idle for extended periods, perform a test print periodically.
• 청소: Do not attempt to clean the ink cartridge nozzles manually with harsh chemicals or abrasive materials. Use the printer's built-in cleaning functions.

7. 문제 해결

This section addresses common issues you might encounter with your ink cartridge.

7.1. 인쇄 품질 불량 (줄무늬, 색바램, 색상 오류)

• 잉크 잔량 확인: Verify that the Matte Black ink cartridge is not low or empty. Replace if necessary.
• 프린트 헤드 청소를 수행하십시오. Use your printer's utility software to perform a print head cleaning cycle. You may need to run it multiple times.
• 프린트 헤드 정렬을 수행하십시오. If prints are misaligned, perform a print head alignment from your printer's maintenance menu.
• Check Media Type: 프린터 설정에서 올바른 용지 종류가 선택되었는지 확인하십시오.
• 카트리지를 점검하십시오: Remove and re-insert the cartridge to ensure it is seated correctly. Check for any visible damage or blockages on the nozzle area (do not touch).

7.2. Cartridge Not Recognized

• Re-install Cartridge: Remove the cartridge and re-insert it firmly until it clicks into place.
• 깨끗한 연락처: With the printer off, gently wipe the electrical contacts on the cartridge and inside the printer with a lint-free cloth slightly dampened with distilled water. Allow to dry completely before re-inserting.
• 프린터 재시작: Turn off the printer, unplug it for a few minutes, then plug it back in and turn it on.
• 호환성 확인: Ensure you are using the correct Graphtec IJ-91001MBK cartridge for your specific printer model.

7.3. Ink Leakage

• 손상 여부 검사: Check the cartridge for any cracks or visible damage.
• 적절한 설치: Ensure the cartridge is installed correctly and not forced into the slot.
• 지원팀에 문의: If leakage persists, discontinue use and contact Graphtec customer support.

8. 사양

9. 보증 및 지원

For information regarding the warranty of your Graphtec IJ-91001MBK ink cartridge, please refer to the warranty documentation provided with your Graphtec printer or visit the official Graphtec website. For technical support or further assistance, please contact Graphtec customer service directly.

Note: Use of non-genuine Graphtec ink cartridges may void your printer's warranty.