1. 소개 및 이상view
The HawkEye DepthTrax 2B is a sophisticated in-dash digital depth finder designed to provide accurate and reliable depth readings for various marine applications. This manual provides comprehensive instructions for the installation, operation, and maintenance of your DepthTrax 2B unit, ensuring optimal performance and longevity.
Figure 1.1: HawkEye DepthTrax 2B Digital Depth Finder (Black and White Models)
2. 주요 특징
- Wide Depth Range: Delivers uninterrupted depth readings from 2.5 to 600 feet, even at speeds up to 60 mph. Transducer Frequency: 200 kHz.
- Versatile Transducer: Includes a dual-mount transducer that can be installed via transom mount or glue-in method. Capable of shooting through solid fiberglass hulls and aluminum hulls up to 1/8-inch thick.
- Advanced Warning System: 3-s를 특징으로 합니다tage system that signals alarm conditions with an audible alarm, an ultra-bright red LED warning light, and LCD alarm indicators.
- 명확한 전시: Equipped with a no-glare, polarized LCD icon display and a storage sun cover, ensuring clear viewing with or without sunglasses.
- 정밀 프로그래밍: Algorithmic programming significantly reduces false readings, providing unmatched precision in depth measurement.
- 사용자 정의 가능한 모양: Includes various bezels and display faces for aesthetic customization.
그림 2.1: 자세한 기능view
3. 설정 및 설치
The DepthTrax 2B is designed for straightforward installation. Please follow these steps carefully for optimal performance.
3.1 변환기 설치
The unit comes with a dual-mount transducer, allowing for either transom or glue-in installation.
- 트랜섬 마운트: Secure the transducer to the boat's transom using the provided mounting bracket and hardware. Ensure it is positioned correctly to avoid interference and maintain consistent water contact at speed.
- Glue-In Mount: This method is suitable for NON-CORED fiberglass hulls or aluminum hulls thinner than 1/8 inch ONLY. It is crucial to test the transducer's performance in the desired location before permanent adhesion. Use marine-grade epoxy for a secure and watertight bond.
Figure 3.1: Transducer and Mounting Hardware
Figure 3.2: Transducer Sonar Beam Illustration
3.2 디스플레이 장치 설치
The DepthTrax 2B is designed for in-dash mounting, fitting seamlessly into a standard 2-inch gauge opening.
- 오프닝 준비: Use a 2-inch hole saw to create the mounting hole in your boat's dash.
- 배선 연결: Connect the transducer cable and power supply (DC power) to the back of the display unit according to the wiring diagram provided in the full manual (available online).
- 보안 장치: Insert the display unit into the opening and secure it with the provided mounting hardware. Apply marine sealant under the bezel for a watertight seal.
- Customize Appearance: Select your preferred bezel (black or white) and display face to match your boat's aesthetics.
그림 3.3: 앞면과 측면 Views of the Display Unit
Figure 3.4: Customizable Bezel and Display Face Options
4. 사용 설명서
The DepthTrax 2B is designed for intuitive operation, providing essential depth information at a glance.
4.1 전원 켜기/끄기
The unit typically powers on with the boat's main power or a dedicated instrument switch, as it does not feature a separate on/off switch. Ensure proper wiring during installation to control power via your boat's electrical system.
4.2 디스플레이 읽기
The large LCD display provides clear depth readings. The polarized screen ensures visibility even in direct sunlight.
4.3 알람 및 단위 설정
Utilize the "DOWN" and "UP" buttons to navigate settings and adjust parameters.
- 단위: Toggle between feet and meters for depth readings.
- 오프셋: Adjust the depth offset to account for the transducer's installation depth below the waterline, ensuring true depth readings.
- 얕은 물 경보: Set a minimum depth threshold. If the water depth falls below this, the 3-stage alarm system will activate.
- 심해 경보: Set a maximum depth threshold. If the water depth exceeds this, the 3-stage alarm system will activate.
- 1-Touch Mute: Temporarily silence alarms with a single touch.
5. 유지관리
Proper maintenance ensures the longevity and continued accuracy of your DepthTrax 2B.
- 청소: Regularly wipe the display screen with a soft, damp cloth. Avoid abrasive cleaners that could damage the polarized surface.
- Transducer Inspection: Periodically inspect the transducer for marine growth or damage. Clean gently with a soft brush if necessary.
- 저장: When not in use, especially during off-season storage, utilize the provided storage sun cover to protect the display from UV exposure and physical damage.
- 사이: 모든 전기 연결부가 단단히 고정되어 있고 부식되지 않았는지 확인하십시오.
6. 문제 해결
If you encounter issues with your DepthTrax 2B, refer to the following common troubleshooting tips:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No Depth Reading / Erratic Readings |
|
|
| Display Not Powering On |
|
|
| Alarms Not Functioning |
|
|
For more detailed troubleshooting or issues not listed here, please refer to the complete online manual or contact HawkEye customer support.
7. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 호크아이 |
| 모델명 | DT2B-TM |
| 부품 번호 | DF10D |
| 전원 | 직류 전원 공급 장치 |
| 화면 크기 | 1.86 인치 |
| 디스플레이 유형 | 액정표시장치 |
| 품목 무게 | 1.7 파운드 |
| 제품 크기(LxWxH) | 4인치 길이 x 2인치 너비 x 6인치 높이 |
| 최대 측정 깊이 | 600 피트 |
| 장착 유형 | Transom Mount (also supports Glue-In) |
| 색상 | 블랙/화이트 |
| 재료 | 알류미늄 |
| 제조업체 | NorCross Marine Products |
| 원산지 | 중국 |
| 포함된 구성 요소 | DepthTrax 2B Boat Mount In Dash Digital Depth Finder |
| 스포츠 타입 | 보트 타기, 낚시 |
8. 보증 및 지원
The HawkEye DepthTrax 2B comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty documentation included with your product or visit the official HawkEye web대지.
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact HawkEye customer support. Contact information can typically be found on the product packaging or the official brand web대지.
Figure 8.1: Designed and Supported in the USA
