보조금 201

그랜트 모델 201 381mm 목재 스티어링 휠 사용 설명서

Model: 201 | Brand: Grant

1. 서론

Welcome to your new Grant Model 201 Wood Steering Wheel. This manual provides essential information for the proper installation, operation, and maintenance of your steering wheel. Please read it thoroughly before proceeding with installation or use.

The Grant Model 201 is a premium steering wheel designed for vehicle-specific fitment. It features a 38.1 cm (15-inch) diameter, a genuine hand-polished hardwood grip with a walnut finish, anodized aluminum rivets for a sporty look, and durable chrome-plated steel spokes.

Grant Model 201 Wood Steering Wheel with chrome spokes and a polished wooden rim.

Image 1.1: The Grant Model 201 Wood Steering Wheel, showcasing its polished hardwood rim and chrome-plated steel spokes.

2. 안전 정보

Always prioritize safety during installation and operation. Failure to follow these instructions may result in injury or damage to your vehicle.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

메모: A vehicle-specific mounting kit (hub adapter) is required for installation and is sold separately. Ensure you have the correct kit for your vehicle's make, model, and year.

4. 설정 및 설치

The following steps provide a general guide for installing the Grant Model 201 steering wheel. Specific procedures may vary depending on your vehicle and the mounting kit used. Always refer to your vehicle's service manual and the instructions provided with your specific mounting kit.

  1. 차량 준비: Park the vehicle on a level surface, engage the parking brake, and disconnect the negative terminal of the battery. Ensure the front wheels are straight.
  2. 원래 스티어링 휠 제거: Carefully follow your vehicle's service manual to remove the original steering wheel. This often involves removing the horn pad, disconnecting electrical connectors (including airbag if present), and unbolting the steering wheel from the steering column shaft.
  3. Install Mounting Hub Adapter: Install the vehicle-specific mounting hub adapter onto the steering column shaft according to the instructions provided with the adapter kit. Ensure it is properly aligned and secured.
  4. Connect Horn Wiring: Route the horn wiring through the steering wheel and connect it to the horn button assembly as per the instructions.
  5. 스티어링 휠을 부착하세요: Position the Grant Model 201 steering wheel onto the mounting hub adapter, aligning the bolt holes. Secure the steering wheel to the hub using the provided fasteners. Tighten bolts evenly and to the specified torque.
  6. 경적 버튼 설치: Install the horn button assembly into the center of the steering wheel.
  7. 최종 점검: Reconnect the negative battery terminal. Test the horn and ensure all steering functions operate correctly. Turn the steering wheel lock-to-lock to confirm no binding or interference.

5. 운영

The Grant Model 201 steering wheel is designed to function identically to your vehicle's original steering wheel once properly installed. It provides a comfortable and secure grip for vehicle control.

Always operate your vehicle safely and responsibly, adhering to all traffic laws.

6. 유지관리

Proper care will ensure the longevity and appearance of your Grant Model 201 steering wheel.

7. 문제 해결

If you encounter any issues with your Grant Model 201 steering wheel, refer to the following table for common problems and solutions.

문제가능한 원인해결책
Steering wheel feels loose or has excessive play.Mounting bolts are not sufficiently tightened. Hub adapter not properly seated.Check and re-tighten all mounting bolts to specified torque. Ensure the hub adapter is correctly installed on the steering column shaft.
경적 소리가 나지 않습니다.Horn wiring disconnected or faulty. Fuse blown.Check all horn wiring connections. Inspect the vehicle's horn fuse and replace if necessary. Consult a professional if the issue persists.
Steering wheel is off-center when driving straight.Steering wheel or hub adapter was not aligned correctly during installation.Re-align the steering wheel and hub adapter. If necessary, a wheel alignment may be required.

8. 사양

Key specifications for the Grant Model 201 Wood Steering Wheel:

특징세부 사항
상표승인하다
모델 번호201
제품 치수39.37 x 11.43 x 38.74cm(15.5 x 4.5 x 15.25인치)
품목 무게1.59킬로그램(3.5파운드)
재료Wood (Walnut finish), Chrome-plated Steel
색상갈색
조립이 필요합니다No (Mounting kit assembly required)
품목 직경15인치(38.1cm)
손잡이 크기15인치
스포크 수3
차량 서비스 유형자동차
한국어:081126002017

9. 보증 및 지원

For information regarding product warranty, returns, or technical support, please refer to the official Grant web사이트를 방문하거나 공인 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

관련 문서 - 201

사전view Grant 스티어링 휠 설치 가이드: 클래식/챌린저 모델
Grant Classic/Challenger 스티어링 휠 설치에 대한 자세한 설명서로, #4405 특수 설치 키트의 FORM #2 및 FORM 7A를 다룹니다. 안전 수칙, 설치 단계, 토크 사양 및 보증 정보가 포함되어 있습니다.
사전view 그랜트 스티어링 휠 설치 가이드: 클래식/챌린저 및 시그니처 시리즈
Grant Classic/Challenger 및 Signature Series 스티어링 휠의 탈거, 허브 장착, 배선 및 보증 정보를 포함한 종합적인 설치 설명서입니다. 차량에 맞는 정확한 장착과 경적 작동을 확인하세요.
사전view Grant 5595/5595-1 빌렛 스티어링 휠 설치 가이드
Grant사의 5595/5595-1 빌렛 스티어링 휠 키트에 대한 자세한 설치 설명서입니다. 순정 스티어링 휠 탈거, 준비 작업, 에어백이 없는 차량의 설치 단계 및 보증 정보를 포함합니다.
사전view Grant 스티어링 휠 설치 가이드: 양식 ​​5249/5249-1
기존 스티어링 휠 탈거, 준비 작업 및 설치 절차를 포함하여 Grant 스티어링 휠 설치에 대한 단계별 지침이 제공됩니다. 제한적 보증 및 안전 경고도 포함되어 있습니다.
사전view GRANT 5560/5560-1 및 5592/5592-1 모델용 스티어링 휠 설치 가이드
Step-by-step instructions for installing GRANT steering wheels (models 5560/5560-1, 5592/5592-1) and a supplement for 1971-on Volkswagen. Includes removal of old wheel, installation of new wheel, warranty information, and important safety warnings. Not for use on airbag-equipped vehicles.
사전view GRANT 5560/5560-1 및 5592/5592-1 모델용 스티어링 휠 설치 가이드
GRANT 스티어링 휠 키트(모델 5560/5560-1, 5592/5592-1)의 자세한 설치 설명서입니다. 준비 작업, 기존 휠 탈거, 새 휠 설치 방법이 포함되어 있습니다. 보증 정보 및 제품 상세 정보도 제공합니다.