1. 서론
This manual provides essential instructions for the installation, maintenance, and proper use of your Wahl Professional 2-Hole Standard Clipper Blade, Model 1006. Designed for professional precision, this replacement blade ensures accurate and sharp performance for various Wahl clippers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your blade.
Image 1: Wahl Professional 2-Hole Standard Clipper Blade, Model 1006.
2. 호환성
The Wahl Professional 2-Hole Standard Clipper Blade (Model 1006) is compatible with the following Wahl clipper models:
- Wahl Super Taper
- Wahl Super Taper II
- Wahl Icon
- Wahl Pro Basic
- Wahl Sterling 9
Image 2: Various Wahl clipper models compatible with the 2-Hole Standard Clipper Blade.
3. 패키지 내용
Your Wahl Professional 2-Hole Standard Clipper Blade package includes:
- 1mm-3mm Standard Clipper Blade
- 블레이드 오일
- 장착 나사
- 설치 지침(본 설명서)
4. 블레이드 설치
Follow these steps to properly install your new clipper blade:
- 전원 끄기 : Ensure your clipper is turned off and unplugged from the power source before beginning installation.
- 오래된 블레이드 제거: Using a screwdriver, carefully loosen and remove the two screws holding the old blade assembly to the clipper housing. Set aside the old blade and screws.
- 클린 클리퍼: Clean any hair or debris from the clipper's blade area using a brush.
- 새로운 블레이드 위치: Place the new Wahl Professional 2-Hole Standard Clipper Blade onto the clipper, aligning the holes in the blade with the screw holes on the clipper. Ensure the small moving blade is correctly seated on the drive lever.
- 안전한 블레이드: Insert the screws and tighten them just enough to hold the blade in place, allowing for slight adjustment.
- Align Blades: Adjust the blade to ensure the top blade (cutter) is perfectly aligned with the bottom blade (comb), with the teeth of the top blade slightly behind the teeth of the bottom blade. This prevents cutting the skin.
- 최종 조임: Once aligned, firmly tighten both screws. Do not overtighten.
- 윤활: Apply a few drops of Wahl clipper oil to the teeth of the new blade.
이미지 3: 상세 view of the 2-Hole Standard Clipper Blade, highlighting its design and dimensions.
5. 유지관리
Proper maintenance is crucial for extending the life and performance of your clipper blade.
5.1 블레이드 오일링
Regular oiling reduces friction, prevents rusting, and ensures smooth cutting performance. Wahl's high-carbon blades benefit significantly from consistent lubrication.
- 기름을 바르십시오: With the clipper turned off, apply a drop of Wahl clipper oil to each corner of the top blade and one drop to the foot of the blade.
- Distribute Oil: Turn the clipper on for a few seconds to allow the oil to work its way into the blades.
- 남은 부분을 닦아내세요: 깨끗한 천으로 여분의 기름을 닦아냅니다.
It is recommended to oil your blades before or after each use, especially if the clipper feels sluggish or pulls hair.
Video 1: Demonstrates how to oil clipper blades to prevent pulling and ensure smooth operation.
5.2 블레이드 청소
After each use, brush off any loose hair from the blades. For a deeper clean, especially after prolonged use or if hair buildup is noticeable:
- 머리카락을 빗어내세요: Use a small cleaning brush to remove hair from between the blade teeth.
- Disinfect (Optional): For professional use, consider using a clipper disinfectant spray (e.g., Wahl Clini-Clip Spray) to sanitize the blades. Follow the product's instructions.
- 재오일: Always re-oil the blades after cleaning or disinfecting to prevent rust and maintain lubrication.
Image 4: Essential maintenance products for Wahl clippers, including blade oil and disinfectant spray.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Clipper pulls or snags hair | Blades are dull, dirty, or not properly oiled. | Clean and oil the blades. If the problem persists, the blades may need sharpening or replacement. |
| Blades are rusting | Insufficient oiling or exposure to moisture. | Ensure blades are thoroughly dried after cleaning and regularly oiled, especially in humid environments. |
| 블레이드가 효과적으로 절단되지 않음 | Improper blade alignment or worn blades. | Check blade alignment as per installation instructions. If blades are old, consider replacing them. |
7. 사양
- 제품 이름: 2-Hole Standard Clipper Blade
- 모델 번호: 1006
- 상표: Wahl 전문가
- 절단 길이: 1mm-3mm (Standard)
- 재료: 고탄소강
- 치수: 2 x 0.1 x 3 인치
- 품목 무게: 0.8 온스
- 한국어: 785085010068, 043917100609
- 제조업체: Wahl 전문가
- 기원: 미국에서 제작
8. 보증 및 지원
For warranty information, product support, or to purchase additional accessories, please visit the official Wahl Professional web사이트를 방문하거나 고객 서비스에 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
Wahl 전문가 Web대지: www.wahlpro.com
