1. 서론
The BELL 5374-0 Blank Round Flat Weatherproof Cover is designed to provide robust protection for electrical splice boxes in outdoor or damp environments. Constructed from durable metal with a powder-coated gray finish, this cover ensures maximum weatherability and scratch resistance. It is specifically designed for use with 4-inch round splice boxes and includes all necessary installation hardware and a gasket for a secure, watertight seal.
2. 제품 특징
- Rugged metallic construction for enhanced durability.
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
- Includes gasket and mounting hardware for complete installation.
- Designed for 4-inch round splice boxes.
- NEMA 3R rated for outdoor use.
3. 안전 정보
설치 및 유지보수 시에는 항상 다음 안전 수칙을 준수하십시오.
- 위험: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installing or servicing.
- Ensure all electrical work complies with local and national electrical codes. If unsure, consult a qualified electrician.
- 본 제품을 원래의 용도 이외의 용도로 사용하지 마십시오.
- Inspect the cover and gasket for any damage before installation. Do not install damaged components.
- 어린이와 허가받지 않은 사람을 작업장에 접근시키지 마십시오.
4. 패키지 내용
설치를 시작하기 전에 모든 항목이 있는지 확인하세요.
- 1 x BELL 5374-0 Blank Round Flat Weatherproof Cover
- 1 x 개스킷
- 장착 하드웨어(나사)
- 다국어 설명서(본 매뉴얼)
5. 설정 및 설치
This weatherproof cover is designed for easy installation on standard 4-inch round splice boxes. Follow these steps for proper installation:
- 전원 끄기: Before starting, ensure the power to the electrical box is completely turned off at the circuit breaker or fuse box. Verify with a voltag전자 테스터.
- 상자 준비: Ensure the 4-inch round splice box is clean and free of debris.
- 가스켓을 제자리에 놓으십시오: Place the provided gasket onto the back of the weatherproof cover, aligning the screw holes. The gasket creates a seal against moisture.
- 커버 정렬: Position the cover with the gasket over the 4-inch round splice box, aligning the screw holes on the cover with those on the box. The cover supports horizontal/vertical mounting.
- 덮개를 고정하십시오: Insert the provided mounting screws through the cover and gasket into the splice box. Tighten the screws evenly until the cover is snug and the gasket is compressed, creating a weatherproof seal. Do not overtighten.
- 설치 확인: Once installed, gently attempt to move the cover to ensure it is securely fastened and does not wobble.
- 복원력 : After confirming secure installation, restore power to the circuit.
그림 5.1: 전면 view of the BELL 5374-0 weatherproof cover, showing its blank, round design and screw holes.
Figure 5.2: Diagram illustrating the dimensions of the BELL 5374-0 cover, showing a diameter of 4.125 inches and a thickness of 0.063 inches.
6. Operating the Cover
The BELL 5374-0 is a blank weatherproof cover designed to seal and protect the contents of a 4-inch round electrical splice box from environmental elements such as rain, dust, and debris. Once properly installed, the cover operates passively by maintaining a sealed enclosure. No active operation is required.
7. 유지관리
Regular maintenance ensures the longevity and effectiveness of your weatherproof cover:
- 청소: 주기적으로 덮개를 광고로 닦아주세요amp cloth to remove dirt, dust, or grime. Avoid abrasive cleaners that could damage the powder-coated finish.
- 점검: Annually inspect the cover and gasket for any signs of wear, cracking, or damage. Ensure the mounting screws remain tight. If the gasket appears compromised, it should be replaced to maintain the weatherproof seal.
- 재도색: While the powder coat finish is durable, if the cover needs to be repainted to match a new exterior color, ensure the paint is suitable for metal and outdoor use.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Cover does not fit flush. | Incorrect box size; debris behind cover; gasket misaligned. | Ensure box is 4-inch round. Clean mounting surface. Realign gasket. |
| Water ingress around cover. | Gasket damaged or missing; screws not tightened sufficiently; improper installation. | Inspect and replace gasket if damaged. Tighten screws evenly. Re-install following instructions carefully. |
| Cover appears scratched or faded. | Normal wear and tear; exposure to harsh elements. | Clean the surface. Consider repainting with an appropriate outdoor metal paint if desired. |
9. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 모델 번호 | 5374-0 |
| 상표 | BELL (Hubbell) |
| 재료 | 금속, 강철 |
| 색상 | 회색 |
| 마치다 | 파우더 코팅 |
| 치수(제품) | Approximately 4.125 inches (Diameter) x 0.063 inches (Thickness) |
| 품목 무게 | 2.24 온스 |
| 장착 유형 | Screw In (Horizontal/Vertical) |
| NEMA 평가 | 3R (방수) |
| 인증 | CSA certified, UL listed |
| 호환성 | 4-inch Round Splice Boxes |
10. 보증 및 지원
For information regarding product warranty, please refer to the documentation provided at the time of purchase or visit the official BELL (Hubbell) website. For technical support or inquiries, please contact BELL customer service directly.
제조업체: 허벨
상표: 벨
Web대지: www.hubbell.com (General Hubbell site, as specific BELL site not provided)
