배저 에어브러시 컴퍼니(Badger Air-Brush Co.) 테이어 앤 챈들러(Thayer & Chandler) T63 베가 2000 에어브러시 사용 설명서

1. Introduction to the Vega 2000 Airbrush

The Badger Air-Brush Co. Thayer & Chandler T63 Vega 2000 is a high-volume, dual-action, internal mix, siphon feed airbrush designed for a wide range of applications. Its streamlined design and anti-clogging cut-away handle enhance comfort and ease of use. This airbrush is engineered for easy maintenance, featuring quickly changeable parts and self-centering, self-sealing fluid tips.

The T63 Complete Airbrush Set includes the Vega 2000 airbrush with three tip/needle/air cap sizes, an attachable jar, two additional mixing jars, a 1/4 ounce color cup, a braided air hose with varying air source fitting, a wrench, a protective cap, and this instruction manual.

The Vega 2000 is suitable for spraying various mediums, including inks, dyes, watercolors, properly reduced acrylics, enamels, lacquers, glazes, latex, Air-Opaque, Air-Tex, SpectraTex, MODELflex, and TotallyTattoo colors. Its versatility makes it ideal for hobbies, crafts, sign painting, taxidermy, automotive painting, and body art.

Figure 1: The Badger Air-Brush Co. Thayer & Chandler T63 Vega 2000 Airbrush. This image shows the main airbrush unit with its chrome body and red handle, highlighting the streamlined design.

2. 설치 및 조립

Before first use, ensure all components are present and free from damage. The T63 kit provides everything needed for initial setup.

2.1 키트 내용

• Vega 2000 Airbrush body
• Three fluid tips/needles/air caps (Sizes: #1 = 0.5mm, #3 = 0.75mm, #5 = 1.0mm)
• Attachable jar
• Two additional mixing jars
• 1/4 ounce color cup
• Braided air hose with varying air source fitting
• 렌치
• 보호캡

Figure 2: Complete kit components for the Badger Air-Brush Co. Thayer & Chandler T63 Vega 2000 Airbrush. This image displays the airbrush alongside its accessories, including multiple jars, an air hose, and various tips.

2.2 초기 조립 단계

1. Select Tip Size: Choose the appropriate fluid tip, needle, and air cap combination for your desired spray pattern. The kit includes three sizes: #1 (0.5mm) for fine detail, #3 (0.75mm) for general purpose, and #5 (1.0mm) for broader coverage.
2. Install Tip and Needle: Carefully insert the chosen needle into the airbrush body from the rear. Screw the corresponding fluid tip onto the front of the airbrush, ensuring it is snug but not overtightened. Attach the air cap over the fluid tip.
3. Attach Color Reservoir: Depending on your application, attach either the 1/4 ounce color cup or one of the mixing jars to the siphon feed connection on the underside of the airbrush. Ensure a secure fit to prevent leaks.
4. 공기 호스 연결: Connect one end of the braided air hose to the air source fitting on the airbrush. Connect the other end to your air compressor or regulated air source. Ensure all connections are tight to prevent air leaks.
5. Air Source Preparation: Ensure your air compressor is set to the recommended operating pressure for airbrushing (typically between 15-30 PSI, adjust as needed for paint consistency and desired effect).

중요한 안전 정보:

• 항상 환기가 잘되는 곳에서 작업하십시오.
• Wear appropriate personal protective equipment, including a respirator mask and safety glasses, especially when spraying paints and solvents.
• Refer to the safety data sheets (SDS) for any materials you are spraying.

3. Operating the Vega 2000 Airbrush

The Vega 2000 is a dual-action airbrush, meaning air and fluid flow are controlled independently by a single trigger.

3.1 Preparing Your Medium

Proper paint consistency is crucial for optimal airbrush performance. Most airbrush-ready paints are pre-thinned. If using thicker mediums, thin them according to the manufacturer's instructions to a milk-like consistency. Strain paints to remove any particles that could clog the airbrush.

3.2 Basic Spraying Technique

1. Load Paint: Pour your prepared medium into the attached color cup or jar.
2. Initiate Airflow: Press down on the trigger to start the airflow.
3. 유체 흐름 제어: While maintaining airflow, pull the trigger back to begin spraying paint. The further back you pull, the more paint will be released.
4. 관행: Practice on scrap material to get a feel for the airbrush's response to trigger movements. Adjust air pressure and paint consistency as needed to achieve the desired spray pattern.
5. Distance and Speed: Maintain a consistent distance from your work surface. Moving closer creates a finer line, while moving further away creates a broader, softer spray. Adjust your hand speed to control paint coverage.
6. 멎는: To stop spraying, release the trigger forward to cut off the paint flow, then release the trigger upwards to stop the airflow. Always stop paint flow before stopping airflow to prevent paint from drying in the tip.

3.3 Adjusting Spray Characteristics

• Fine Lines: Use the #1 (0.5mm) tip, lower air pressure, and hold the airbrush closer to the surface.
• 광범위한 적용 범위: Use the #5 (1.0mm) tip, higher air pressure, and hold the airbrush further from the surface.
• Trigger Tension: The Vega 2000 features a spring adjuster (T612) to customize lever tension, allowing for a personalized feel and control over the trigger's resistance.

4. 청소 및 유지 관리

Regular and thorough cleaning is essential for the longevity and optimal performance of your Vega 2000 airbrush. The design facilitates easy disassembly for maintenance.

4.1 Quick Cleaning (Between Color Changes)

1. Empty any remaining paint from the color cup/jar.
2. Add a small amount of appropriate cleaner (water for acrylics, solvent for enamels/lacquers) to the cup/jar.
3. Spray the cleaner through the airbrush onto a paper towel or into a cleaning pot until the spray runs clear.
4. Use a cotton swab or brush to clean the inside of the color cup/jar.

4.2 Thorough Cleaning (After Each Session)

1. Perform a quick clean as described above.
2. 분해: Unscrew the air cap and fluid tip. Carefully remove the needle by pulling it straight back from the rear of the airbrush. The rocker lever is attached to the needle tube for easy disassembly, preventing loose parts.
3. 깨끗한 구성 요소:
   • Soak the fluid tip, air cap, and needle in the appropriate cleaner.
   • Use a specialized airbrush cleaning brush to clean the inside of the fluid tip and the airbrush body's fluid passage.
   • Wipe the needle clean with a soft cloth dampened with cleaner. Be careful not to bend the tip of the needle.
4. 재조립: Once all parts are clean and dry, carefully reassemble the airbrush in reverse order of disassembly. Ensure the needle slides smoothly and the fluid tip is securely, but not overly, tightened.
5. 매끄럽게 하기: Apply a tiny drop of airbrush-specific lubricant to the needle packing and trigger mechanism periodically to ensure smooth operation.

주의:

• Never use metal tools to clean the fluid tip or nozzle, as this can cause damage.
• Avoid soaking the entire airbrush body in solvents, as this can damage internal seals.

5. 일반적인 문제 해결

Most airbrush issues can be resolved with proper cleaning and adjustment.

6. 제품 사양

7. 보증 및 지원

For specific warranty information regarding your Badger Air-Brush Co. Thayer & Chandler T63 Vega 2000 Airbrush, please refer to the documentation included with your purchase or contact Badger Air-Brush Co. directly. Warranty terms and conditions may vary.

For technical support, replacement parts, or further assistance, please visit the official Badger Air-Brush Co. website or contact their customer service department. You can often find additional resources and FAQs on their brand store page:

Visit the Badger Store on Amazon

Always ensure you are using genuine Badger replacement parts to maintain the performance and integrity of your airbrush.