BIC America HT8W 8인치 3웨이 Acoustech 시리즈 매립형 스피커 사용 설명서

소개

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BIC America HT8W 8-Inch 3-Way Acoustech Series In-Wall Speakers. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

안전 지침

• Ensure power to the installation area is disconnected before beginning any wiring or installation.
• Consult a qualified electrician or installer if you are unsure about any part of the installation process.
• 스피커를 과도한 습기나 극한의 온도에 노출시키지 마세요.
• Use appropriate wiring gauges as recommended for audio equipment to prevent overheating and ensure proper signal transmission.
• 스피커를 열원 근처나 직사광선에 노출시키지 마세요.
• 포장재는 질식 위험을 방지하기 위해 어린이의 손이 닿지 않는 곳에 보관하십시오.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• BIC America HT8W 8" 3-way Acoustech Series In-Wall Speakers (1 Pair)
• Mounting brackets (pre-attached or included separately)
• Removable speaker grilles
• 사용 설명서(본 문서)

제품 끝view

The BIC America HT8W speakers are designed for in-wall installation, offering a 3-way sound reproduction system. Key components include:

• 8-inch Poly Graphite Woofer: Provides robust low-frequency response.
• 2.5-inch Volume-adjustable Poly Midrange: Delivers clear and detailed mid-range frequencies.
• 1-inch Volume-adjustable Pivoting Titanium Tweeter: Produces crisp high frequencies and can be aimed for optimal sound dispersion.
• Self-resetting Thermal Cut-offs: Protect the speakers from overload.

Image: The BIC America HT8W In-Wall Speaker. On the left, the speaker is shown with its grille removed, revealing the 8-inch poly graphite woofer, the 2.5-inch poly midrange, and the 1-inch pivoting titanium tweeter. Adjustment knobs for tweeter and midrange levels are visible. On the right, the speaker is shown with its white metal grille attached, presenting a clean, flush appearance for in-wall installation.

설정 및 설치

1. 설치 계획

• 위치: Choose a suitable location in your wall, ensuring no obstructions like studs, electrical wiring, or plumbing. Use a stud finder to locate studs.
• 정리: Ensure sufficient depth behind the wall for the speaker enclosure.
• 배선: Plan your speaker wire routing from your amplifier/receiver to the speaker locations.
• Rough-in Kits: For pre-construction, optional M-8R rough-in kits are available (sold separately) to simplify installation.

2. 개구부 절단

1. Carefully trace the speaker cutout template (usually provided with the speaker or found in a separate template kit) onto the wall.
2. 건식 벽체 톱이나 다용도 칼을 사용하여 추적한 선을 따라 조심스럽게 자릅니다.

3. 스피커 배선

1. Run speaker wire through the wall to the cutout opening.
2. 스피커 선 끝부분의 절연체를 약 1/2인치 정도 벗겨냅니다.
3. 스피커의 양극(+) 단자를 전원 케이블의 양극(+) 단자에 연결하세요. amplifier/receiver, and the negative (-) terminal of the speaker to the negative (-) terminal of your amplifier/receiver. Ensure correct polarity for all speakers in your system.

4. 스피커 장착

1. Insert the speaker assembly into the wall opening.
2. Tighten the mounting screws located on the front baffle of the speaker. These screws activate the metal mounting brackets that pivot out and clamp onto the drywall.
3. 중요 참고 사항: Tighten screws firmly but avoid over-tightening, which can warp the speaker frame or damage the wall. Ensure the speaker is flush and secure.

5. 그릴 부착

The speaker grilles are designed to fit snugly. Gently press the grille into place until it is flush with the wall. If the grille rattles at high volumes, ensure the speaker is securely mounted and consider adding a thin strip of foam tape around the speaker frame before attaching the grille to improve the fit and reduce vibration.

작동 지침

1. 초기 파워업

Once installed and wired, connect your amplifier/receiver to a power source and turn it on. Start with the volume at a low level and gradually increase it.

2. Adjusting Tweeter and Midrange Levels

The HT8W speakers feature volume-adjustable tweeter and midrange controls on the front baffle (visible when the grille is removed). These controls allow you to fine-tune the sound to your listening environment and personal preference.

• 트위터 조정: Rotate the tweeter control to increase or decrease high-frequency output. This is useful for brightening or softening the sound.
• 중간 범위 조정: Rotate the midrange control to adjust the clarity and presence of vocals and instruments.
• 피벗 트위터: The 1-inch titanium tweeter can be gently pivoted to aim the high frequencies towards your primary listening area, optimizing sound dispersion.

Experiment with these settings while listening to various types of audio to find the ideal balance for your room.

3. 시스템 통합

For optimal performance in a surround sound setup, consider integrating a subwoofer to handle very low frequencies, as in-wall speakers excel in mid-range and high-frequency reproduction.

유지

• 청소: 스피커 그릴은 주기적으로 부드럽고 마른 천으로 먼지를 제거해 주세요. 잘 지워지지 않는 먼지는 약간 건조한 천으로 닦아주세요.amp cloth can be used, but ensure no moisture enters the speaker components.
• 석쇠 회화: The grilles can be painted to match your wall color. Use a thin coat of spray paint and ensure the paint does not clog the grille perforations, which could affect sound quality. Allow to dry completely before reattaching.
• 점검: Periodically check the mounting screws to ensure they remain secure.

문제 해결

명세서

보증 및 지원

BIC America HT8W speakers come with a 부품 및 인력에 대한 7년 보증. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact BIC America customer service. Keep your proof of purchase for warranty validation.

For further assistance, visit the official BIC America web사이트를 방문하거나 지원 채널에 문의하세요.