1. 서론
This manual provides instructions for the setup, operation, and maintenance of your La Crosse Technology WS-9117U-IT-CBP Wireless Temperature Station. This device monitors both indoor and outdoor temperatures, displaying them on a digital screen along with time and date information.
The system consists of a main receiver unit and a wireless outdoor sensor. The receiver displays current indoor temperature, outdoor temperature, time, date, and records of minimum and maximum temperatures with timestamps.
2. 패키지 내용
- 1x WS-9117U-IT-CBP Wireless Temperature Station Receiver
- 1x TX29U-IT Wireless Outdoor Temperature Sensor
- 1x Detachable Stand for Receiver
- 센서용 장착 하드웨어
메모: 2 AAA alkaline batteries for the receiver and 2 AA alkaline batteries for the sensor are required and sold separately.
3. 설정
3.1 배터리 설치
수신기 유닛:
- Remove the battery cover on the back of the receiver unit.
- Insert 2 new AAA alkaline batteries according to the polarity markings (+ and -).
- 배터리 커버를 다시 장착하세요.
Outdoor Sensor (TX29U-IT):
- Open the battery compartment on the back of the TX29U-IT sensor.
- Insert 2 new AA alkaline batteries according to the polarity markings (+ and -).
- Close the battery compartment securely to ensure weather resistance.
그림 1: Receiver and Sensor with Battery Compartments. This image illustrates the main receiver unit and the outdoor sensor, highlighting where batteries are inserted in each device.
3.2 센서 배치
For accurate outdoor temperature readings, place the TX29U-IT sensor in a shaded area, away from direct sunlight and heat sources. Ensure it is sheltered from direct rain and snow to prevent damage, while allowing for adequate air circulation.
- The sensor transmits data up to 330 feet (100 meters) in open air at a 915 MHz frequency. Walls and other obstructions will reduce this range.
- Mount the sensor vertically using the provided hardware.
그림 2: Recommended Sensor Placement. This image demonstrates an ideal outdoor location for the sensor, ensuring it is protected from direct weather elements and sunlight for accurate readings.
3.3 초기 동기화
After installing batteries in both units, the receiver will automatically attempt to connect with the outdoor sensor. This process may take a few minutes. Ensure both units are within range during initial setup. If the outdoor temperature does not appear, press the "SEARCH" button on the receiver to initiate a manual search for the sensor.
4. 사용 설명서
4.1 디스플레이 오버view
그림 3: Receiver LCD Display. This image provides a detailed view of the receiver's digital screen, indicating the layout of indoor temperature, outdoor temperature, time, and date information.
The digital screen displays the following information:
- 현재 실내 온도
- 현재 실외 온도
- Time (12-hour or 24-hour format)
- 날짜
- Minimum and Maximum Temperature Records with Time Stamp
4.2 시간 및 날짜 설정
The unit features a quartz clock. To set the time and date:
- 를 누르고 계세요 "세트" button (or similar button, refer to specific unit markings) until the time display begins to flash.
- 사용하세요 "+" or "-" 깜박이는 값(예: 시, 분)을 조정하는 버튼입니다.
- 누르다 "세트" again to confirm the setting and move to the next adjustable item.
- 모든 시간 및 날짜 설정이 구성될 때까지 반복합니다.
- The unit supports 12-hour or 24-hour time formats. This can typically be toggled during the time setting process.
4.3 온도 표시 (화씨/섭씨)
To switch between Fahrenheit (°F) and Celsius (°C) temperature display, press the "°F/°C" button, usually located on the back or side of the receiver unit.
4.4 Minimum and Maximum Temperature Records
The receiver automatically records the minimum and maximum indoor and outdoor temperatures. To view 이 기록들:
- 를 누르세요 "MIN/MAX" button once to display the maximum recorded temperatures.
- 를 누르세요 "MIN/MAX" button a second time to display the minimum recorded temperatures.
- 를 누르세요 "MIN/MAX" button a third time to return to the current temperature display.
- To clear the recorded minimum and maximum values, press and hold the "MIN/MAX" button while the min/max values are displayed.
4.5 Adding Additional Sensors
The temperature station can accommodate up to three outdoor sensors. To add an additional sensor (sold separately), install batteries in the new sensor and then press the "CHANNEL" or "SEARCH" button on the receiver to cycle through channels or initiate a search for new sensors. Follow the pairing instructions provided with the additional sensor.
5. 유지관리
- 배터리 교체: Replace batteries annually or when the low battery indicator appears on the display. Use only alkaline batteries.
- 센서 관리: While the sensor is designed to withstand fog or mist, it should be sheltered from direct rain and prolonged exposure to harsh weather conditions to ensure longevity and accurate readings.
- 청소: 디스플레이와 센서를 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
6. 문제 해결
| 문제 | 해결책 |
|---|---|
| 실외 온도를 측정할 수 없습니다. |
|
| Inaccurate outdoor temperature. |
|
| 디스플레이가 비어 있거나 어둡습니다. |
|
| 시간이 정확하지 않습니다. |
|
7. 사양
| 모델: | WS-9117U-IT-CBP |
| 실내 온도 범위: | +32°F ~ +140°F(0°C ~ +60°C) |
| 실외 온도 범위: | -39.8°F ~ +157.2°F(-39.9°C ~ +69.6°C) |
| 온도 정확도: | ±1°C |
| 전송 주파수: | 915MHz |
| 전송 범위: | 야외에서 최대 330피트(100미터) |
| 수신기 전력: | 2x AAA Alkaline Batteries (not included) |
| 센서 전원: | AA 알칼리 건전지 2개 (미포함) |
| 수신기 크기: | 5.1 x 2.47 x 1인치(129.5 x 62.7 x 25.4mm) |
| 센서 치수: | 5 x 1.5 x 0.8인치(127 x 38.1 x 20.3mm) |
| 재료: | 플라스틱 |
| 디스플레이 유형: | LCD 모니터 |
8. 보증 및 지원
This product is covered under a limited 1-year warranty from the date of purchase. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official La Crosse Technology web대지.
추가 지원 및 제품 정보는 다음을 방문하세요. Amazon의 La Crosse Technology Store.
