1. 서론
The Tascam MD-CD1 is a professional 2U rackmountable unit combining a CD player and a MiniDisc recorder. Designed for reliable performance in various applications, it offers features such as MP3 CD playback, pitch control, and RS-232C serial control. This manual provides essential information for the proper setup, operation, and maintenance of your MD-CD1 unit.
주요 특징:
- CD playback with tempo change without affecting key.
- Dedicated Digital I/O (optical) and analog I/O (RCA).
- PS/2 Keyboard input for title input and external control.
- MD-CD continuous playback.
- Wireless IR remote controller included.
- Supports ST, MONO, LP2, and LP4 MiniDisc recording modes.
- 4x speed duplication from CD to MiniDisc.
2. 안전 정보
Always read and follow all safety instructions provided in this manual to prevent electric shock, fire, or injury. Do not expose the unit to rain or moisture. Do not remove the cover or attempt to service the unit yourself. Refer all servicing to qualified service personnel. Ensure proper ventilation and avoid blocking ventilation openings. Use only the power supply specified by the manufacturer.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Tascam MD-CD1 Unit
- 원격 제어
- 전원 케이블
- 사용 설명서(본 문서)
4. 제품 오버view
The MD-CD1 features a robust front panel for easy access to controls and a rear panel for various input/output connections.
전면 패널:
그림 4.1: 전면 view of the Tascam MD-CD1 unit, showing the CD tray, MiniDisc slot, display, and various control buttons and knobs.
그림 4.2: 각진 앞면 view of the Tascam MD-CD1, highlighting the rackmount ears and the layout of the CD and MiniDisc sections.
후면 패널 :
그림 4.3: 후면 view of the Tascam MD-CD1, displaying the various audio input/output ports, digital connections, and the power inlet.
5. 설정
5.1 랙 마운팅
The MD-CD1 is designed for 2U rackmounting. Secure the unit into a standard 19-inch equipment rack using appropriate rack screws. Ensure sufficient space for ventilation around the unit.
5.2 오디오 연결
Connect the audio outputs of the MD-CD1 to your amplifier, mixer, or powered speakers. The unit provides both analog RCA and digital optical outputs. For MiniDisc recording, connect your audio source to the analog RCA or digital optical inputs.
- Analog RCA: Use standard RCA cables for unbalanced analog audio connections.
- 디지털 광학: Use optical cables for digital audio input/output.
- 헤드폰: Connect headphones to the front panel 1/4-inch jack for monitoring.
5.3 전원 연결
Connect the supplied power cable to the AC inlet on the rear panel and then to a suitable AC power outlet. Ensure the power switch on the front panel is in the OFF position before connecting.
5.4 PS/2 Keyboard Connection
A PS/2 keyboard can be connected to the dedicated port on the front panel for easier title input and external control of certain functions.
6. 사용 설명서
6.1 CD 플레이어 작동
- CD 로드: CD 트레이를 열려면 열기/닫기 버튼을 누르세요. CD를 라벨면이 위로 오도록 넣고, 트레이를 닫으려면 열기/닫기 버튼을 다시 누르세요.
- 재생: Press the PLAY button to start playback. Use the SKIP buttons to navigate between tracks.
- MP3 재생: The unit supports MP3 file playback from CDs. ID3 tag 정보를 표시할 수 있습니다.
- 피치 컨트롤: Use the dedicated pitch control on the CD section to adjust playback speed by +/-16%. The unit can also change tempo without affecting the key.
6.2 MiniDisc Recorder Operation
- Loading a MiniDisc: Insert a MiniDisc into the slot.
- 녹음 모드: The MD-CD1 supports Stereo (ST), Mono (MONO), LP2, and LP4 recording modes. Select the desired mode from the MD menu.
- 녹음: Select the input source (analog or digital). Adjust recording levels as needed. Press the RECORD button to arm, then PLAY to start recording.
- 편집 기능: The unit provides various editing functions for MiniDisc tracks, including divide, combine, erase, and move.
- Overwrite Recording: Allows recording over existing material on a MiniDisc.
- 피치 컨트롤: Adjust MiniDisc playback pitch by +/-12.5%.
6.3 Combined Features
- 4x Speed Duplication: The unit allows for high-speed duplication from CD to MiniDisc.
- MD-CD Continuous Playback: Configure the unit for continuous playback between the CD and MiniDisc sections.
6.4 Remote Control and External Control
- Wireless IR Remote: 제공된 리모컨을 사용하면 멀리서도 편리하게 조작할 수 있습니다.
- RS-232C Serial Control: The unit supports RS-232C for integration into larger control systems. Refer to the detailed RS-232C protocol documentation for programming information.
7. 유지관리
To ensure the longevity and optimal performance of your MD-CD1, follow these maintenance guidelines:
- 청소: Use a soft, dry cloth to clean the exterior of the unit. For stubborn dirt, lightly damp물에 적신 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
- 디스크 관리: Handle CDs and MiniDiscs by their edges. Store them in their cases to prevent scratches and dust accumulation.
- 통풍: 과열을 방지하기 위해 통풍구가 막히지 않도록 하십시오.
- 저장: When not in use for extended periods, disconnect the power cable and store the unit in a clean, dry environment.
8. 문제 해결
This section addresses common issues you might encounter with the MD-CD1.
8.1 전원 없음
- 전원 케이블이 본체와 AC 콘센트에 제대로 연결되어 있는지 확인하십시오.
- Ensure the power switch on the front panel is in the ON position.
8.2 오디오 출력 없음
- Verify that audio cables are correctly connected to the appropriate output jacks on the MD-CD1 and input jacks on your amp정수기/믹서.
- 입력 선택을 확인하세요 amp정수기/믹서.
- Ensure the volume levels on both the MD-CD1 and your connected audio equipment are adequately set.
- If using headphones, ensure they are fully inserted and the headphone volume is adjusted.
8.3 Recording Issues (MiniDisc)
- 녹음 안함: Ensure a blank or erasable MiniDisc is inserted and not write-protected. Verify the input source is correctly selected and active.
- Incorrect Recording Levels: Adjust the input level controls for the MiniDisc section. Note that the CD playback volume adjustment (in the digital domain) can affect the recording level when dubbing from CD to MD at regular speed. It is recommended to adjust the CD playback volume to achieve desired recording levels on the MD side, leaving the MD record level at 0.0dB for more predictable results.
- Blank Spaces Between Tracks During Dubbing: The MD-CD1 is designed to insert a short blank space between tracks when dubbing directly from the internal CD player to the MiniDisc recorder, regardless of speed or settings. To avoid these blank spaces, it is necessary to physically connect the CD digital output to the MD digital input using an optical cable. This bypasses the internal dubbing mechanism that introduces the gaps.
- Noisy Analog Inputs: If you experience excessive noise when recording via the analog inputs, ensure all cables are shielded and properly grounded. Consider using digital inputs if available for your source.
8.4 리모컨이 작동하지 않음
- 리모콘의 배터리를 확인하고 필요한 경우 교체하십시오.
- 리모컨과 본체의 적외선 수신기 사이에 장애물이 없는지 확인하십시오.
9. 사양
| 상표 | 타스캠 |
| 모델명 | MDCD1 |
| 품목 모델 번호 | MD-CD1 |
| 품목 무게 | 12.8파운드(5.8kg) |
| 제품 치수 | 22 x 15 x 7인치(55.9 x 38.1 x 17.8cm) |
| 호환 장치 | 스피커, 헤드폰 |
| 커넥터 유형 | 광학, RCA |
| 연결 기술 | 적외선(리모컨용) |
| 특징 | Wireless (Remote Control) |
| 포함된 구성 요소 | 원격 제어 |
10. 보증 정보
Warranty details for the Tascam MD-CD1 are typically provided with the product documentation at the time of purchase. Please refer to the warranty card or contact Tascam customer support for specific terms and conditions regarding your unit. Keep your proof of purchase for warranty claims.
11. 지원
For further assistance, technical support, or service inquiries, please contact Tascam customer support. You can find contact information and additional resources on the official Tascam web대지: www.tascam.com.
