Hunter Sprinkler Node400 4-Station Irrigation Controller User Manual

소개

Welcome to the user manual for the Hunter Node400 4-Station Irrigation Controller. This battery-powered controller is engineered for isolated sites and areas without traditional AC power, providing a reliable and efficient solution for automatic irrigation. Its robust, waterproof design ensures durability and consistent performance even in challenging valve box environments.

제품 특징

• Fixed 4-station capacity for managing multiple irrigation zones.
• Maximum station run time of 6 hours, suitable for various watering needs.
• Manual cycle operation for immediate watering control.
• Easy retrieve memory feature to restore previous programming settings.
• Powered by one or two 9V batteries, offering flexibility and extended power.
• Easy-to-program LCD screen for clear visibility and intuitive setup.
• Master valve control capability for enhanced system management.
• Standard Hunter controller programming with 3 independent programs and 4 start times per program.
• Waterproof exterior designed for secure installation within a valve box.

설정 및 설치

The Hunter Node400 is engineered for quick and straightforward installation, typically mounting directly onto a valve's solenoid. This design minimizes the need for additional tools like screws or drills, simplifying the setup process.

구성 요소 이상view

이미지: 앞면 view of the Hunter Node400 controller, displaying the LCD screen, control buttons, and the colored wiring harness for connecting to irrigation stations.

배터리 설치

1. Locate the battery compartment on the controller unit.
2. Insert one or two new 9V alkaline batteries, ensuring correct polarity as indicated inside the compartment. Using two batteries will extend the operational life of the controller.
3. Securely close the battery compartment cover to maintain the unit's waterproof seal.

배선 연결

1. Connect the common wire from your irrigation valves to the common terminal on the Node400, typically labeled 'COM'.
2. Connect the individual zone wires from your valves to the corresponding station terminals (1, 2, 3, 4) on the Node400.
3. If utilizing a rain sensor, connect its wires to the designated sensor terminals (SEN) on the controller.

Image: Hunter Node400 controller shown with an optional mounting bracket, illustrating how the unit can be secured within a valve box for stable installation.

작동 지침

The Node400 features an intuitive LCD screen and a user-friendly push-button interface for all programming and operational adjustments.

기본 프로그래밍 단계

1. 를 누르세요 PRG 버튼을 눌러 프로그래밍 모드로 들어갑니다.
2. 화살표 버튼(< 그리고 >) to navigate through various settings, including current time, start times, run times for each station, and specific watering days.
3. 값을 조정하려면 다음을 사용하세요. + 그리고 - 버튼.
4. The controller supports 3 independent programs (A, B, C) and allows for up to 4 start times per program.
5. Set your desired watering days, which can include specific days of the week, odd/even days, or interval watering cycles.
6. After setting each parameter, ensure you confirm the selection to save the changes.

수동 조작

To initiate a watering cycle manually, press the dedicated manual cycle button. This button is typically indicated by a water droplet symbol or a 'Manual' label on the controller's interface. You can usually select a specific station to run or activate all stations for a predetermined duration.

유지

배터리 교체

The Node400 operates on 9V batteries. For optimal performance and to prevent interruptions, it is recommended to check and replace the batteries annually or immediately when the low battery indicator appears on the LCD screen.

1. 배터리 덮개를 엽니다.
2. Carefully remove the old 9V batteries.
3. Insert new 9V alkaline batteries, ensuring correct polarity.
4. Close the battery compartment securely to maintain the waterproof integrity of the unit.

이미지: 후면 view of the Hunter Node400 controller with a black protective cap, highlighting its compact and sealed design which contributes to its durability in outdoor environments.

문제 해결

• 컨트롤러 전원이 켜지지 않음: Verify that the batteries are correctly installed and are fresh. Replace old batteries if necessary.
• Stations Not Watering: Double-check all programming settings, including start times, run times, and watering days. Inspect wiring connections to the valves for any disconnections or damage. Ensure the master valve, if used in your system, is functioning correctly.
• 불규칙한 작업: This can often be resolved by replacing the batteries. Also, ensure the controller's seals are intact and there is no moisture ingress into the unit.
• 프로그래밍의 어려움: If you encounter challenges with programming, refer to the detailed programming instructions available in the full product manual or on Hunter's official support resources. The 'easy retrieve memory' feature can be used to revert to previous settings if an error occurs during programming.

명세서

보증 및 지원

보증 정보

The Hunter Node400 Irrigation Controller is covered by a 2-year warranty period from the date of purchase. Please retain your original proof of purchase for any warranty claims.

고객 지원

For further assistance, access to detailed programming guides, or technical support, please visit the official Hunter Industries web사이트를 방문하거나 고객 서비스 부서에 직접 문의하세요.