1. 서론
This manual provides essential information for the safe and effective use of your wolfcraft 2144000 Mounted Stone Set. Please read these instructions carefully before operation and retain them for future reference.
제품 끝view
The wolfcraft Mounted Stone Set is designed for grinding and finishing various materials, including metals, glass, ceramics, and plastics. The set includes five mounted stones of different shapes and one dressing stone for maintaining the abrasive surfaces.
Figure 1: The wolfcraft 2144000 Mounted Stone Set, featuring five distinct grinding stone shapes and a dressing stone.
포함된 구성 요소
- 5 x Mounted Grinding Stones (various shapes)
- 1 x Dressing Stone
2. 안전 지침
부상 및 제품 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.
- 개인 보호 장비(PPE)를 착용하세요: Always wear safety glasses, hearing protection, and gloves when operating rotary tools with mounted stones.
- Check RPM Limits: Ensure the RPM of your rotary tool does not exceed the maximum RPM specified for the mounted stones (max. 23,000 RPM).
- 안전한 작업물: 작업 중 움직이지 않도록 항상 작업물을 단단히 고정하세요.
- Inspect Stones: Before each use, inspect the mounted stones for any damage, cracks, or excessive wear. Do not use damaged stones.
- 적절한 장착: Ensure the mounted stone is securely fastened in the chuck of your rotary tool.
- 통풍: Work in a well-ventilated area to avoid inhaling dust particles.
- 과열을 피하세요: Do not apply excessive pressure, which can cause the stone or workpiece to overheat.
- 명확하게 유지: 회전하는 부품에 손이나 헐렁한 옷을 가까이 두지 마세요.
Figure 2: Safety symbols indicating the necessity of eye protection, hearing protection, and gloves during operation. Also shown are maximum RPM and individual stone dimensions.
3. 설정
Follow these steps to properly set up the mounted stones for use.
- Select the Appropriate Stone: Choose the mounted stone with the shape and grit suitable for your specific application and material.
- Insert into Rotary Tool: Loosen the chuck of your rotary tool (e.g., drill, die grinder). Insert the shaft of the mounted stone into the chuck, ensuring it is seated deeply and securely.
- 척을 조이세요: Firmly tighten the chuck to prevent the stone from slipping during operation. Verify that the stone is centered and runs true.
- Verify RPM: Confirm that your rotary tool's speed setting does not exceed the maximum recommended RPM of 23,000 for these stones.
4. 사용 설명서
Use the mounted stones for grinding, deburring, and shaping various materials.
일반적인 사용
- 재료 호환성: Suitable for metals, glass, ceramics, and plastic materials.
- 애플리케이션: Apply light, consistent pressure. Allow the stone to do the work. Excessive pressure can lead to premature wear, overheating, and potential damage to the stone or workpiece.
- 움직임: Move the stone continuously across the workpiece to ensure even material removal and prevent grooving.
그림 3: 예ample of a mounted stone in use, smoothing a circular opening in a workpiece, demonstrating its application for precise shaping.
Figure 4: A conical mounted stone deburring the interior edge of a metal pipe, illustrating its effectiveness for internal grinding and edge finishing.
5. 유지관리
Using the Dressing Stone
Over time, grinding stones can become clogged with material or develop an uneven surface, reducing their effectiveness. The included dressing stone is used to clean and reshape the grinding stones.
- Mount the Grinding Stone: Secure the grinding stone you wish to dress in your rotary tool.
- Activate Rotary Tool: Turn on the rotary tool at a moderate speed.
- Dress the Stone: Gently press the rotating grinding stone against the dressing stone. Move the grinding stone across the surface of the dressing stone to remove clogged material and expose fresh abrasive particles. This also helps to restore the original shape of the stone.
- 검사: After dressing, inspect the grinding stone to ensure it is clean and has a renewed abrasive surface.
저장
Store the mounted stone set in a dry place, away from moisture and direct sunlight, to prevent degradation of the abrasive material.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 연삭 성능 저하 | Stone is clogged or worn out. | Use the dressing stone to clean and reshape. Replace if severely worn. |
| 과도한 진동 | Stone not securely mounted or damaged. | Ensure stone is tightly secured in the chuck. Inspect for damage and replace if necessary. |
| Overheating of workpiece/stone | Excessive pressure or incorrect RPM. | Reduce pressure. Verify RPM is within recommended limits. Allow cooling periods. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 2144000 |
| 재료 | 알루미늄 산화물 |
| 그릿 유형 | Medium (Grit Number: 120) |
| 조각 수 | 6 (5 mounted stones, 1 dressing stone) |
| 최대 RPM | 23,000 RPM |
| 호환 장치 | Rotary tools (e.g., drills, die grinders) |
| 품목 무게 | 0.352온스(약 10g) |
| 제품 크기(대략) | 0.24"L x 0.24"W (individual stone dimensions vary) |
| UPC/GTIN | 04006885214408 |
8. 보증 및 지원
wolfcraft products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the official wolfcraft web사이트를 방문하거나 고객 지원팀에 문의하세요.
연락처 정보
울프크래프트 GmbH
볼프슈트라세 1
59746 켐페니히
독일
이메일: info@wolfcraft.com
Web대지: www.wolfcraft.com
Figure 5: wolfcraft's commitment to European manufacturing and recognition as a major German brand.
