WAYNE CDU790 섬프 펌프 사용 설명서

소개

The WAYNE CDU790 is a 1/3 HP submersible sump pump designed for efficient and reliable water removal from basements and other areas prone to flooding. Constructed with durable cast iron and stainless steel, this pump is built for long-lasting performance. Its integrated vertical float switch and top suction design ensure optimal operation, preventing airlocks and minimizing clogging from debris. This manual provides essential information for the proper installation, operation, and maintenance of your WAYNE CDU790 sump pump.

주요 특징

Figure 1: The WAYNE CDU790 1/3 HP Submersible Sump Pump.

• 실내에서만 사용 가능: Ideal for keeping basements dry during heavy water flow, capable of pumping up to 4,600 gallons per hour (GPH).
• Tough And Durable: Features corrosion-resistant epoxy coated steel motor housing, stainless steel fasteners, and a cast-iron volute for extended life in demanding sump pump applications.
• 효율적인 디자인: The top suction design effectively eliminates air lock and minimizes clogging caused by debris in the sump pit.
• 간편한 설치: Designed for quick setup, typically within 15 minutes, without the need for drilling a weep hole or complex plumbing changes.
• Integrated Vertical Float Switch: Tested for 1 million cycles, providing reliable and long-lasting automatic operation.
• 1-1/2" NPT Discharge: Ensures compliance with standard building codes for discharge connections.
• 미국에서 조립: Proudly assembled in the USA, ensuring quality and dependable, ultra-quiet performance.

Figure 2: Key features of the WAYNE sump pump, highlighting easy installation, durability, and US assembly.

그림 3: 상세 view of the sump pump's components and design benefits.

설정 및 설치

Proper installation is crucial for the optimal performance and longevity of your WAYNE CDU790 sump pump. Follow these steps carefully:

1. Prepare the Sump Basin: 섬프 b를 확인하십시오asin is clean and free of debris. The pump is designed for 11-inch diameter or larger sump basins. A minimum basin height of 22 inches is required.
2. 펌프 위치: Place the pump on the bottom of the basin, ensuring it is stable and facing away from the inlet pipe. The integrated vertical float switch should have clear movement without obstruction.
3. Install Discharge Plumbing: Connect the 1-1/2 inch NPT discharge pipe to the pump. Install a check valve to prevent back-flow of water into the sump pit.
4. Install Gate/Ball Valve (Optional but Recommended): If desired, install a gate or ball valve in the discharge line to allow for easy pump removal or maintenance without draining the entire system.
5. 보안 전원 코드: Secure the power cord along the discharge pipe to prevent it from interfering with the float switch or becoming submerged unnecessarily.
6. 펌프 테스트: b를 채우세요asin with water to activate the pump and ensure it is working properly. Observe the float switch operation and water discharge.

Figure 4: Illustrated installation instructions for the sump pump.

Figure 5: The pump features an easy-carry handle for portability and simple installation.

작업

The WAYNE CDU790 sump pump operates automatically via its integrated vertical float switch. When water levels in the sump basin rise, the float switch will lift, activating the pump. The pump will then discharge water through the connected plumbing until the water level drops, causing the float switch to lower and deactivate the pump. This automatic cycle ensures your basement remains dry without constant manual intervention.

유지

Regular maintenance helps ensure the long-term reliability of your sump pump. Perform the following checks periodically:

• Inspect the Sump Pit: Regularly check the sump pit for any debris, dirt, or sediment that could obstruct the pump's operation or clog the intake. Clean as necessary.
• Test the Float Switch: Pour water into the sump pit to manually activate the pump. Ensure the float switch moves freely and activates/deactivates the pump correctly.
• Check Discharge Pipe: Verify that the discharge pipe is free of obstructions and that water is flowing freely away from your home.
• 전원 코드 검사: Check the power cord for any signs of damage, fraying, or wear.
• 특이한 소음을 들어보세요: During operation, listen for any unusual noises, vibrations, or signs of strain from the pump, which could indicate a problem.

문제 해결

If your WAYNE CDU790 sump pump is not operating as expected, consider the following common troubleshooting steps:

• 펌프가 켜지지 않음:
  • Check if the pump is plugged in and receiving power.
  • Ensure the float switch is not obstructed and can move freely to activate the pump.
  • 회로 차단기가 작동하지 않았는지 확인하세요.
• 펌프가 계속 작동 중:
  • Check if the float switch is stuck in the "on" position or is obstructed.
  • Inspect the check valve for proper function; a faulty check valve can cause water to flow back into the pit.
  • Ensure there is no continuous water source feeding into the sump pit.
• Pump Not Pumping Water:
  • Check for clogs in the intake screen or discharge pipe.
  • Ensure the pump is fully submerged in water when it activates.
  • Verify that the impeller is not damaged or obstructed.
• 특이한 소음:
  • Foreign objects in the impeller can cause grinding or rattling noises. Disconnect power and inspect.
  • Air trapped in the pump or discharge line can cause gurgling sounds. Ensure the top suction design is clear.

For more detailed troubleshooting or if issues persist, refer to the official user manual or contact Wayne customer support.

명세서

Figure 6: Product dimensions and flow rate details for the CDU790.

보증 및 지원

The WAYNE CDU790 sump pump comes with a 3년 한정 보증, ensuring dependable performance. For detailed warranty information, technical support, or service inquiries, please refer to the official documentation or contact Wayne customer service.

• 사용자 매뉴얼(PDF): 사용자 설명서 다운로드
• 설치 설명서(PDF): 설치 설명서 다운로드
• Visit Wayne Store: Wayne Official Store on Amazon