Kidde KN-COEG-3 Carbon Monoxide and Explosive Gas Alarm User Manual

소개

The Kidde KN-COEG-3 Carbon Monoxide and Explosive Gas Alarm is designed to protect your home and family from the dangers of carbon monoxide (CO), methane, natural gas, propane, and other explosive gases. Utilizing advanced electrochemical sensor technology, this alarm provides continuous monitoring and alerts you with an 85-decibel alarm and a clear digital LED display when gas is detected. It features both plug-in operation and a 9-volt battery backup for continuous protection during power outag에스.

그림 1: 전면 view of the Kidde KN-COEG-3 Carbon Monoxide and Explosive Gas Alarm.

주요 특징

• 이중 감지: Detects both carbon monoxide and explosive gases (methane, natural gas, propane).
• 디지털 LED 디스플레이: Shows CO levels in parts per million (ppm) or indicates "GAS" when explosive gas is present.
• Plug-In with Battery Backup: Operates on 120V AC power with a 9-volt alkaline battery for continuous protection during power failures.
• 85데시벨 경보: Provides a loud, clear warning when gas is detected.
• 최고 수준의 메모리: Records the highest CO level detected since the last reset or power cycle.
• 스마트 소음 차단 버튼: 약 8분 동안 불필요한 경보음을 일시적으로 끕니다.
• 다중 장착 옵션: Can be plugged directly into a wall outlet, wall-mounted, or placed on a table/shelf using the included extension cord.

Figure 2: The alarm offers 2-in-1 detection for carbon monoxide and explosive gases.

설정 및 설치

The Kidde KN-COEG-3 alarm offers flexible installation options to suit your home's needs.

1. 배터리 설치

Before initial use, the included 9-volt alkaline battery must be installed. This battery provides backup power in case of an AC power outage.

1. 장치 뒷면에서 배터리 칸을 찾으세요.
2. 배터리 덮개를 엽니다.
3. 9볼트 배터리를 배터리 클립에 연결하세요.
4. 배터리를 수납공간에 넣고 덮개를 단단히 닫으세요.

2. 전원 연결

The alarm is designed to plug into a standard 120V AC wall outlet.

• 직접 플러그인: Simply plug the unit directly into any standard 120V AC wall outlet. The plug can be rotated to ensure the unit remains vertical regardless of outlet orientation.
• 탁상 배치: For placement on a table or shelf, use the included 6-foot extension cord. Plug the alarm into the extension cord, and then plug the extension cord into a wall outlet.
• 벽걸이 : The unit can also be wall-mounted using the provided screws and anchors. Ensure the unit is plugged into an outlet or the extension cord is used for power.

그림 3: 후면 view showing the 9V battery compartment and rotatable plug.

Figure 4: Various mounting and placement options for the alarm.

작동 지침

Once powered, the alarm will perform a self-test and begin monitoring. The digital display provides real-time information.

Digital Display and Status Indicator

The digital LED display shows the current CO level in parts per million (ppm) or indicates "GAS" when explosive gas is detected. It updates every 15 seconds. A blinking dot in the lower right-hand corner of the display indicates normal operation.

테스트/재설정 버튼

Press and hold the "TEST/RESET" button to test the alarm's functionality. The alarm will sound, and the display will show a test sequence. Release the button to stop the test. This button also silences the alarm during a nuisance alarm or resets the Peak Level Memory.

피크 레벨 버튼

Press the "PEAK LEVEL" button to view the highest CO concentration recorded by the alarm since it was last reset or unplugged.

Figure 5: Labeled diagram of the alarm's front panel controls and indicators.

Figure 6: Alarm notifications are triggered when CO or explosive gas is detected.

배치 지침

For optimal protection, install a carbon monoxide and explosive gas alarm on every level of your home, especially near sleeping areas. Avoid placing alarms within 6 feet of cooking or heating appliances to prevent false alarms.

Figure 7: Recommended placement of safety devices throughout a home.

Understanding Alarms and Gases

Carbon monoxide (CO) is an odorless, tasteless, and invisible gas often referred to as the "silent killer." Methane and propane gases, while commonly used, can also pose risks if leaks occur.

Common Sources of Carbon Monoxide

• 벽난로
• Kitchen Ranges
• 휴대용 히터
• 발전기
• 그릴
• 온수기
• Garages (running vehicles)
• Broken Pipes (gas leaks)

Figure 8: Visual representation of common CO sources in and around the home.

유지 보수 및 테스트

Regular maintenance ensures your alarm functions correctly.

정기 테스트

Test your alarm weekly by pressing the Test/Reset button. The alarm should sound, indicating proper operation of the horn and circuitry.

배터리 교체

The 9-volt battery should be replaced annually, or immediately if the low battery warning sounds (a chirp or specific indicator). Always use a fresh 9-volt alkaline battery.

청소

Clean the alarm regularly to prevent dust buildup from interfering with sensor operation. Use a soft, damp cloth to wipe the exterior. Do not use cleaning sprays or solvents.

문제 해결

• Alarm Chirping: A persistent chirping sound typically indicates a low battery. Replace the 9-volt battery immediately. Note that the low battery alert can be very loud and persistent until the battery is replaced.
• 허위 경보: If the alarm sounds without apparent gas presence, it might be due to cooking fumes, shower steam, or proximity to combustion appliances. Use the Smart-Hush button to temporarily silence the alarm. Relocate the alarm if false alarms are frequent.
• Difficulty Opening Battery Cover: Some users report the battery cover can be stiff. Use a sturdy, flat tool (like a screwdriver) to gently pry it open if needed, being careful not to damage the unit.
• 디스플레이/전원 없음: Ensure the unit is securely plugged into a working 120V AC outlet. Check the circuit breaker. If using battery backup, ensure the battery is correctly installed and not depleted.

명세서

보증 및 지원

The Kidde KN-COEG-3 Carbon Monoxide and Explosive Gas Alarm comes with a 5-year limited manufacturer's warranty. For detailed warranty information or support, please refer to the official User Guide (PDF) available online or contact Kidde customer service.

사용자 가이드(PDF): 사용자 가이드 다운로드

보증서(PDF): 보증 정보 다운로드