소개
This instruction manual provides essential information for the proper installation and maintenance of your Panasonic MC-V350B Type UB-9 Replacement Upright Vacuum Cleaner Belts. Adhering to these instructions will help ensure optimal performance and longevity of your vacuum cleaner.
This image displays the front of the product packaging for the Panasonic MC-V350B Type UB-9 Replacement Upright Vacuum Cleaner Belts. The packaging indicates it contains 2 belts and is compatible with Panasonic MC-V75** series vacuum cleaners. It also highlights that the product is 'Made in USA of U.S. and Foreign Components' and includes the UPC 037988958092.
안전 정보
- Always unplug the vacuum cleaner from the power outlet before attempting any maintenance or belt replacement.
- Wear appropriate protective gear, such as gloves, if necessary.
- Ensure the vacuum cleaner is stable and on a flat surface during maintenance.
- Use only genuine Panasonic replacement belts to ensure proper fit and performance.
설정 및 설치
These belts are designed for Panasonic upright vacuum cleaners, specifically replacing Type UB-9 belts and compatible with MC-V75** series models.
Belt Replacement Procedure:
- 진공 청소기의 플러그를 뽑으세요: Disconnect the vacuum cleaner from the electrical outlet to prevent accidental startup.
- 브러시 롤에 접근하세요: Lay the vacuum cleaner flat on its front or back. Locate and remove the bottom plate or brush roll cover. This usually involves unscrewing a few screws.
- 오래된 벨트 제거: Carefully remove the worn or broken belt from the brush roll and motor shaft. Note how the old belt was routed.
- 깨끗한 구역: Clean any debris, hair, or dust from the brush roll, motor shaft, and belt path.
- 새 벨트 설치: Loop one end of the new Panasonic MC-V350B Type UB-9 belt around the motor shaft. Stretch the other end of the belt around the brush roll. Ensure the belt is centered and not twisted.
- 재조립: Place the brush roll back into its housing, ensuring the belt remains properly seated. Reattach the bottom plate or brush roll cover and secure it with screws.
- 시험: Plug the vacuum cleaner back in and test its operation to ensure the brush roll spins correctly.
작동 고려 사항
After successful installation of the new belt, your vacuum cleaner's brush roll should operate effectively, aiding in debris agitation and pickup. If the brush roll does not spin or spins intermittently, refer to the Troubleshooting section.
유지
- 정기 검사: Periodically inspect the vacuum belt for signs of wear, cracking, stretching, or breakage. This can be done when cleaning the brush roll.
- 브러시 롤 세척: Regularly remove hair and debris from the brush roll to prevent strain on the belt and motor.
- 교체 빈도: Belts typically need replacement every 6 to 12 months, depending on usage, or immediately if signs of wear or damage are observed.
문제 해결
- 브러시 롤이 회전하지 않음:
- Check if the belt is broken or dislodged. Replace if broken, re-seat if dislodged.
- Ensure the brush roll is free of obstructions (e.g., tangled hair, carpet fibers).
- Verify the bottom plate is securely reattached.
- 흡입/청소 성능 저하:
- A stretched or worn belt may not allow the brush roll to spin at optimal speed. Consider replacing the belt.
- Check for clogs in the vacuum hose or filters.
명세서
| 상표 | 파나소닉 |
| 모델 번호 | MC-V350B |
| 유형 | 유비-9 |
| 수량 | 2팩 |
| 호환 장치 | Panasonic Upright Vacuum Cleaners (MC-V75** series) |
| 제품 치수 | 6.3 x 3.3 x 0.9 인치 |
| 품목 무게 | 1파운드 |
| 국제 무역 식별 번호(GTIN) | 00037988958092 |
보증 정보
Specific warranty details for this replacement part are not provided in the product information. Please refer to your original vacuum cleaner's warranty documentation or contact Panasonic customer support for information regarding replacement parts.
고객 지원
For further assistance or inquiries regarding your Panasonic vacuum cleaner or replacement parts, please visit the official Panasonic support web사이트 또는 고객 서비스 부서에 문의하십시오.
파나소닉 공식 Web대지: www.panasonic.com
