1. 서론
This manual provides essential information for the safe and effective operation of your Fender '65 Twin Reverb Guitar Amplifier. The '65 Twin Reverb is an 85-watt, all-tube amplifier designed for electric guitar, featuring two 12-inch Jensen C-12K speakers, dual channels (Normal and Vibrato), Fender reverb, and vibrato effects. It is equipped with four 6L6 Groove Tubes output tubes, four 12AX7 preamp tubes, and two 12AT7 preamp tubes. The amplifier's construction includes a black textured vinyl covering, silver grille cloth, and tilt-back legs for sound projection.
주요 특징은 다음과 같습니다.
- 85 watts of output power at 4 ohms.
- Two 12-inch 8-ohm Jensen C-12K speakers for clear sound reproduction.
- All-tube design with four 6L6 Groove Tubes output tubes, four 12AX7 preamp tubes, and two 12AT7 preamp 튜브.
- Dual channels: Normal and Vibrato.
- Integrated Fender reverb and vibrato effects.
- Includes a two-button footswitch for reverb and vibrato on/off control.
- Equipped with tilt-back legs for optimal sound projection.
이미지 1.1: 앞면 view of the Fender '65 Twin Reverb Guitar Amp리파이어, 쇼크asing its classic black textured vinyl covering and silver grille cloth, with control panel visible at the top.
2. 안전 정보
이것을 작동하기 전에 amplifier, please read and understand all safety warnings and instructions. Retain this manual for future reference.
- 감전 위험: 열지 마세요 amp앰프 섀시. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 높은 Voltage: 튜브 amp앰프는 매우 높은 볼륨으로 작동합니다.tages internally, which can be lethal.
- 통풍: 충분한 환기를 유지하세요. 환기구를 막지 마세요.
- 수분: 노출시키지 마십시오 amp비 또는 습기에 대한 liifier.
- 전원 코드: Use only the provided power cord. Do not defeat the grounding-type plug.
- 청력 보호: 높은 음량에 장시간 노출되면 영구적인 청력 손상이 발생할 수 있습니다.
- 제안 65 경고: 이 제품에는 캘리포니아주에서 암과 선천적 결함 또는 기타 생식적 피해를 일으키는 것으로 알려진 화학 물질이 포함되어 있습니다.
3. 설정 및 연결
다음 단계에 따라 설정하세요. amp정수기:
- 놓기: 배치하다 amplifier on a stable, level surface. Utilize the tilt-back legs for improved sound projection if desired. Ensure sufficient space around the amp환기를 위한 리피어.
- 전원 연결: 제공된 AC 전원 코드를 콘센트에 연결하십시오. amp앰프의 AC 입력 단자를 접지된 전기 콘센트에 연결하십시오. amp앰프의 전원 스위치는 연결하기 전에 OFF 위치에 있어야 합니다.
- 계기 연결: Connect your guitar to either the "INPUT 1" or "INPUT 2" jack on the desired channel (Normal or Vibrato) using a high-quality instrument cable. Input 1 typically offers higher sensitivity.
- 풋스위치 연결: Connect the two-button footswitch to the "FOOTSWITCH" jack on the rear panel. This allows remote control of the Reverb and Vibrato effects.
이미지 3.1: 위에서 아래로 view of the Fender '65 Twin Reverb Guitar Amplifier with dimensions indicated. The amplifier measures approximately 28.25 inches in width, 22.5 inches in depth, and 12.25 inches in height.
4. 사용 설명서
익숙해지세요 amplifier's controls before powering on.
4.1. 전원 켜기 / 끄기
- Ensure all volume controls are set to zero.
- Flip the POWER switch to the ON position.
- Flip the STANDBY switch to the ON position after approximately 30-60 seconds. This allows the tubes to warm up, extending their lifespan.
- To power off, reverse the process: STANDBY to OFF, then POWER to OFF.
4.2. 제어판 오버view
The front panel features controls for two independent channels: Normal and Vibrato.
| 제어 | 설명 |
|---|---|
| Normal Channel Inputs (1 & 2) | Input jacks for the Normal channel. Input 1 is higher sensitivity. |
| 보통 볼륨 | Adjusts the overall output level of the Normal channel. |
| Normal Treble | Adjusts the high-frequency response of the Normal channel. |
| 보통 중간 | Adjusts the mid-range frequency response of the Normal channel. |
| Normal Bass | Adjusts the low-frequency response of the Normal channel. |
| Vibrato Channel Inputs (1 & 2) | Input jacks for the Vibrato channel. Input 1 is higher sensitivity. This channel includes Reverb and Vibrato effects. |
| Vibrato Volume | Adjusts the overall output level of the Vibrato channel. |
| Vibrato Treble | Adjusts the high-frequency response of the Vibrato channel. |
| Vibrato Middle | Adjusts the mid-range frequency response of the Vibrato channel. |
| Vibrato Bass | Adjusts the low-frequency response of the Vibrato channel. |
| 리버브 | Controls the intensity of the spring reverb effect. |
| Speed (Vibrato) | Adjusts the rate of the vibrato (tremolo) effect. |
| Intensity (Vibrato) | Adjusts the depth of the vibrato (tremolo) effect. |
| 파일럿 Lamp | 다음과 같은 경우에 켜집니다. amp리파이어의 전원이 켜져 있습니다. |
Experiment with the tone controls (Treble, Middle, Bass) to shape your sound. The Reverb and Vibrato effects can be activated or deactivated using the front panel controls or the included footswitch.
5. 유지관리
적절한 유지관리는 제품의 수명과 최적의 성능을 보장합니다. amp리퍼.
- 청소: 청소하다 amplifier's exterior with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- 튜브 교체: Vacuum tubes have a finite lifespan. If you notice a decrease in performance, unusual noise, or loss of power, tubes may need replacement. This should be performed by a qualified technician.
- 저장: 저장하다 amp증폭기는 직사광선과 극한 온도 변화를 피해 건조하고 온도가 조절되는 환경에 보관하십시오.
- 운송: 운송 시 다음 사항을 확인하십시오. amplifier is securely packed to prevent damage from impacts.
6. 문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제에 대해 설명합니다. 여기에 나열되지 않은 문제가 발생하면 자격을 갖춘 서비스 담당자에게 문의하십시오.
| 문제 | 가능한 원인 / 해결책 |
|---|---|
| 소리가 나지 않습니다 |
|
| 약하거나 왜곡된 소리 |
|
| 과도한 험 또는 소음 |
|
| Reverb or Vibrato Not Working |
|
7. 사양
Detailed technical specifications for the Fender '65 Twin Reverb Guitar Amp리퍼.
- 모델 이름: '65 Twin Reverb
- 모델 번호: 0217300000
- 시리즈: 빈tage Reissue
- Amp유형: 튜브
- 출력 전력: 85 Watts into 4 Ohms
- 스피커: Two 12" Jensen C-12K (8 Ohm)
- 사전amp 튜브: 4 x 12AX7, 2 x 12AT7
- 파워 튜브: 4 x 6L6 Groove Tubes
- 채널: Two (Normal and Vibrato)
- Controls (Normal Channel): Volume, Treble, Middle, Bass
- Controls (Vibrato Channel): Volume, Treble, Middle, Bass, Reverb, Speed, Intensity
- 효과: Reverb, Vibrato (Tremolo)
- 풋스위치: 2-Button Footswitch included (Reverb On/Off, Vibrato On/Off)
- 캐비닛 소재: Birch/Maple Plywood
- 피복: Black Textured Vinyl
- 그릴 천: 은
- 제품 크기(길이 x 너비 x 높이): 28.25 x 22.5 x 12.25 인치
- 품목 무게: 72파운드
- ASIN: B0002E3GLY
- 제조업체: Fender Musical Instruments Corp.
8. 보증 및 지원
Fender Musical Instruments Corporation (FMIC) provides a limited warranty for its products. Specific warranty terms and conditions may vary by region and product type. Please refer to the official Fender web자세한 내용은 웹사이트 또는 제품 보증 카드를 참조하십시오.
For technical support, service, or warranty claims, please contact Fender Customer Support through their official website or authorized service centers. Always provide your amplifier's model number (0217300000) and serial number when seeking support.
온라인 리소스: For additional information, FAQs, and support, visit the official Fender web대지: www.fender.com
