보겐 C20

보겐 클래식 시리즈 Amp C20 사용 설명서

모델 : C20

1. 서론

This manual provides essential instructions for the proper installation, operation, and maintenance of your Bogen Classic Series Amp C20. Please read this manual thoroughly before using the product to ensure safe and efficient performance. Retain this manual for future reference.

2. 안전 정보

경고 :이 제품에는 암 및 선천성 결손 또는 기타 생식 장애를 유발하는 것으로 캘리포니아 주에 알려진 화학 물질이 포함되어 있습니다.

Always observe basic safety precautions when using electrical equipment to reduce the risk of fire, electric shock, and injury to persons.

3. 제품 오버view

The Bogen Classic Series Amp C20 is a single-channel amplifier designed for various audio applications. It features robust construction and reliable performance.

3.1 주요 특징

3.2 패키지 내용

포장을 풀 때 다음 품목이 포함되어 있는지 확인하세요.

3.3 전면 패널 컨트롤 및 표시기

앞쪽 view of Bogen Classic Series Amp C20 showing controls

Image 1: Front panel of the Bogen Classic Series Amp C20. This image displays the MIC1, MIC2, AUX, and TREBLE control knobs, along with the POWER switch and the "Classic Series" branding.

  1. MIC1 Input Level Control: Adjusts the volume for Microphone Input 1.
  2. MIC2 Input Level Control: Adjusts the volume for Microphone Input 2.
  3. AUX Input Level Control: Adjusts the volume for the Auxiliary input.
  4. 트레블 컨트롤: Adjusts the high-frequency response of the audio output.
  5. 전원 스위치: 토글 amp앰프의 전원 켜짐 및 꺼짐.

3.4 후면 패널 연결

뒤쪽 view of Bogen Classic Series Amp C20 showing connections

Image 2: Rear panel of the Bogen Classic Series Amp C20. This image shows the various input and output connections, including power input and speaker terminals.

The rear panel contains connections for power, microphone inputs, auxiliary inputs, and speaker outputs. Specific details on these connections are provided in the Setup section.

4. 설정 및 설치

4.1 장착

The Bogen Classic Series Amp C20 is designed for surface mounting. Ensure the mounting surface is stable and capable of supporting the unit's weight (approximately 4.5 pounds). Allow adequate ventilation around the unit to prevent overheating.

4.2 전기 연결

  1. 전면 패널의 전원 스위치가 꺼짐 위치에 있는지 확인하십시오.
  2. Connect the power cord to a standard 120 Volt AC outlet.

4.3 오디오 입력 연결

오디오 소스를 후면 패널의 해당 입력 단자에 연결하십시오.

4.4 스피커 출력 연결

Connect your speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for all speaker connections. Refer to your speaker's manual for impedance matching requirements.

5. 운영

5.1 전원 켜기/끄기

  1. 전원을 켜려면 amplifier, press the POWER switch on the front panel to the ON position. The power indicator (if present) will illuminate.
  2. To power off, press the POWER switch to the OFF position.

5.2 입력 레벨 조정

  1. Start with all input level controls (MIC1, MIC2, AUX) set to their minimum position.
  2. Begin playing audio from your desired source.
  3. Slowly increase the corresponding input level control until the desired volume is achieved.
  4. Adjust the TREBLE control to fine-tune the high-frequency response to your preference.

5.3 일반적인 사용 팁

6. 유지관리

6.1 청소

겉면을 닦아주세요 amplifier with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components.

6.2 환기

적절한 공기 흐름을 보장하고 과열을 방지하기 위해 통풍구에 먼지와 이물질이 없는지 정기적으로 확인하세요.

6.3 서비스

내부에는 사용자가 수리할 수 있는 부품이 없습니다. amp리파이어. 모든 서비스는 자격을 갖춘 서비스 직원에게 맡기십시오.

7. 문제 해결

If you experience issues with your Bogen Classic Series Amp C20, consult the following table before contacting support.

문제가능한 원인해결책
소리가 출력되지 않습니다.
  • 전원이 연결되어 있지 않거나 켜져 있지 않습니다.
  • Input source not connected or playing.
  • 입력 레벨 컨트롤이 너무 낮게 설정되어 있습니다.
  • Speaker connections incorrect or loose.
  • Verify power connection and switch position.
  • Check audio source and its connection to the amp리퍼.
  • 입력 레벨 제어 기능을 점진적으로 높이십시오.
  • Inspect and secure all speaker wiring.
왜곡된 소리.
  • 입력 레벨이 너무 높습니다.
  • 스피커 임피던스 불일치.
  • Reduce input level controls.
  • 스피커가 호환되는지 확인하십시오. amp앰프의 출력 임피던스.
Static or crackling from knobs.Dust or oxidation on control potentiometers.Consult qualified service personnel for cleaning or replacement of potentiometers.
Unit becomes excessively warm or emits odor.
  • 환기 불량.
  • 내부 구성 요소 문제.
  • 장치 주변에 적절한 공기 흐름이 유지되도록 하세요.
  • Immediately power off the unit and disconnect from power. Contact qualified service personnel.

8. 사양

특징세부 사항
상표보겐
모델C20
품목 모델 번호C20
제조업체 부품 번호C20
품목 치수(L x W x H)11.37 x 7.37 x 2.87 인치
제품 치수11.37 x 7.37 x 2.87 인치
품목 무게4.5파운드
권tage120 볼트
왓tage50 와트
출력 전력20 와트
채널 수1
장착 유형표면 실장
제조업체보겐
한국어:765368330250
첫 번째 이용 가능 날짜16년 2004월 XNUMX일

참고 : 사양은 예고없이 변경 될 수 있습니다.

9. 보증 및 지원

For warranty information and technical support, please refer to the official Bogen web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

연락처 정보:

관련 문서 - C20

사전view Bogen NQ-GA20P2 나이퀴스트 통합 전원 Amplifier 구성 매뉴얼
Bogen NQ-GA20P2 Nyquist 20와트 통합 전원 구성 가이드 amp설정, 네트워크 설정, 펌웨어 업데이트, DSP 매개변수 조정 등을 다루는 lifier입니다.
사전view 보겐 CC4041 CC 시리즈 Amplifier 설치 및 사용 설명서
Bogen CC4041 CC 시리즈 설치 및 사용 설명서 Amp이 설명서에는 기능, 연결, 작동, 안전 지침 및 기술 사양이 자세히 설명되어 있습니다.
사전view 보겐 BPA60 파워 Amplifier 설치 및 사용 설명서
Bogen BPA60 60와트 모노채널 전원에 대한 포괄적인 설치 및 사용 가이드 amp기술 사양, 안전 예방 조치, 연결 다이어그램, 작동 지침 및 보증 정보를 자세히 설명하는 설명서입니다.
사전view Bogen TPU Series Telephone Paging Amplifiers: Installation and Use Manual
Comprehensive installation and use manual for Bogen TPU35B, TPU60B, TPU100B, and TPU250 telephone paging amplifiers, covering setup, wiring, operation, and specifications.
사전view 보겐 플래티넘 시리즈 PS120-G2, PS240-G2 공공 주소 Amplifier 설치 및 사용 가이드
Bogen Platinum 시리즈 공공 주소용 종합 설치 및 사용 가이드 AmpPS120-G2 및 PS240-G2 모델 리파이어. 전문 오디오 설치에 필요한 기능, 작동, 안전, 문제 해결 및 기술 사양을 다룹니다.
사전view Bogen NQ-E7010 나이퀴스트 입출력 컨트롤러 구성 가이드
이 가이드는 Bogen NQ-E7010 나이퀴스트 입출력 컨트롤러를 구성하는 방법에 대한 자세한 지침을 제공합니다. 네트워크 설정 관리, 펌웨어 업데이트, 로그 액세스, 그리고 Bogen 디지털 인증 기관을 통한 보안 액세스 보장 방법을 알아보세요.