신뢰 12616

Trust Soundwave 1000P PC Speaker User Manual

모델: 12616

소개

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Trust Soundwave 1000P PC Speaker system. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Trust Soundwave 1000P PC Speaker system with subwoofer and two satellite speakers

Image: The Trust Soundwave 1000P PC Speaker system, featuring a central subwoofer unit and two compact satellite speakers, designed for computer audio. The subwoofer is typically placed on the floor, while the satellite speakers are positioned on a desk.

설치 지침

Follow these steps to correctly set up your Trust Soundwave 1000P PC Speaker system.

  1. 짐 풀기: Carefully remove all components from the packaging. Ensure you have the subwoofer, two satellite speakers, and all necessary cables.
  2. 스피커 배치:
    • Place the subwoofer on the floor, preferably near your computer desk, to optimize bass response. The vertical bass reflex design benefits from clear space around it.
    • Position the two satellite speakers on your desk, equidistant from your listening position, for optimal stereo sound.
  3. 위성 스피커 연결하기: Connect the cables from the satellite speakers to the corresponding output ports on the subwoofer unit. Ensure a secure connection.
  4. Connecting to Audio Source (PC): Connect the 3.5mm audio jack cable from the subwoofer to the audio output port (usually green) on your computer's sound card.
  5. 전원 연결: Plug the power cable from the subwoofer into a standard electrical outlet.
  6. 초기 전원 켜기: Turn on the speaker system using the power control, typically located on the subwoofer or a wired remote.

스피커 작동

Once set up, you can begin using your Soundwave 1000P speakers.

  • 전원 켜기/끄기: Use the main power switch or button to turn the system on or off. An indicator light may confirm the power status.
  • 볼륨 조절: Adjust the overall volume using the dedicated volume knob or controls. Start with a low volume and gradually increase it.
  • 베이스 조정: The subwoofer features an adjustable bass control. Rotate the bass knob to achieve your desired level of deep bass.
  • 3D Sound Switch: Activate or deactivate the 3D sound feature using the designated switch. Experiment with this setting to find your preferred audio experience for different content.
  • 오디오 입력: The system primarily uses an AUX connection. Ensure your audio source is playing sound through its 3.5mm audio output.

유지 보수 및 관리

적절한 유지 관리는 스피커 시스템의 수명 연장과 최적의 성능을 보장합니다.

  • 청소:
    • 청소하기 전에 전원을 분리하십시오.
    • Use a soft, dry cloth to wipe down the speaker surfaces.
    • 액체 세척제, 에어로졸 또는 연마제를 사용하지 마십시오. 이러한 제품은 마감재나 내부 부품을 손상시킬 수 있습니다.
  • 놓기: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the subwoofer.
  • 케이블 관리 : Keep cables tidy and avoid sharp bends or kinks to prevent damage.
  • 저장: If storing the speakers for an extended period, disconnect them from power, clean them, and store them in a dry, cool place, preferably in their original packaging.

문제 해결 가이드

If you encounter issues with your Trust Soundwave 1000P speakers, refer to the following common problems and solutions.

문제가능한 원인해결책
스피커에서 소리가 나지 않습니다.
  • 전원이 연결되지 않았거나 켜져 있지 않습니다.
  • 오디오 케이블이 분리되었거나 고장났습니다.
  • 볼륨이 너무 낮습니다.
  • Incorrect audio output selected on PC.
  • Ensure power cable is securely plugged in and speakers are turned on.
  • Check 3.5mm audio cable connection to both speakers and PC. Try a different cable if available.
  • Increase speaker volume and PC volume.
  • Verify PC audio settings to ensure the correct output device is selected.
왜곡되거나 불분명한 소리.
  • 볼륨이 너무 높습니다.
  • 오디오 소스 품질이 좋지 않습니다.
  • 케이블 연결이 느슨합니다.
  • Reduce volume on both speakers and PC.
  • 다른 오디오 소스로 테스트하거나 file.
  • 모든 케이블 연결부가 단단히 고정되었는지 확인하십시오.
서브우퍼에서 저음이 나오지 않습니다.
  • Bass control knob set too low.
  • 서브우퍼에 전원이 공급되지 않습니다.
  • Increase the bass control knob on the subwoofer.
  • Ensure the subwoofer unit is receiving power and is turned on.

제품 사양

Key technical details for the Trust Soundwave 1000P PC Speaker system.

  • 모델 번호: 12616
  • 상표: 신뢰하다
  • 스피커 유형: Subwoofer (2.1 system)
  • 최대 피크 출력 전력: 1000와트
  • RMS 와트tage: 7 Watt (5 + 2 x 1 Watt RMS)
  • 연결 기술 : AUX(3.5mm 잭)
  • 오디오 출력 모드: 스테레오 재생
  • 전원: 유선 전기
  • 품목 무게: 10g
  • 장착 유형: Tabletop Mount (for satellites), Floor (for subwoofer)
  • 제어 방법: 만지다

보증 정보

이 제품에는 다음이 포함되어 있습니다. 한정 보증. For specific terms and conditions, including warranty duration and claim procedures, please refer to the warranty card included with your purchase or visit the official Trust web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

고객 지원

For further assistance, technical support, or inquiries not covered in this manual, please visit the official Trust support web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제조업체의 web사이트 또는 제품 포장.

공식 신탁 Web대지: www.trust.com

관련 문서 - 12616

사전view TYTAN 2.1 스피커 세트 빠른 설치 가이드
Trust TYTAN 2.1 스피커 세트에 대한 빠른 설치 가이드로, 설정, 오디오 연결, 전원, 무선 페어링, Windows 및 Bluetooth 장치에 대한 ECO 모드에 대한 자세한 내용을 설명합니다.
사전view Trust Vigor 2.0 스피커 세트 빠른 설치 가이드
Trust Vigor 2.0 스피커 세트의 빠른 설치 가이드로, PC 및 노트북 사용자를 위한 설정 및 연결 방법을 제공합니다. USB 및 오디오 잭을 통한 연결 방법과 Windows에서 장치를 선택하는 방법에 대한 자세한 내용이 포함되어 있습니다.
사전view Trust Avora 2.1 스피커 세트 빠른 설치 가이드
Trust Avora 2.1 스피커 세트를 설정하기 위한 간결하고 SEO 최적화된 HTML 가이드로, 볼륨/베이스 제어, 물리적 설정, 오디오/전원 연결, Windows 설치 등을 다룹니다.
사전view Trust Arys 2.0 스피커 세트: 빠른 설치 가이드
Trust Arys 2.0 스피커 세트(14W, 모델 20179)에 대한 포괄적인 빠른 설치 가이드입니다. PC 또는 기타 장치에 스피커를 연결, 전원 공급 및 설정하는 방법을 알아보세요.
사전view Trust 2.1 스피커 세트 빠른 설치 가이드
Trust 2.1 스피커 세트의 빠른 설치 가이드입니다. 설정, 오디오 연결, 전원 켜기, 볼륨 조절 방법을 자세히 설명합니다. Windows 설치 및 ECO 모드에 대한 정보도 포함되어 있습니다.
사전view Trust GXT 611 Wezz 게이밍 스피커 세트 사용 설명서
Trust GXT 611 Wezz 게이밍 스피커 세트 사용 설명서. 설치 및 작동 방법을 자세히 설명합니다. 연결, 전원, RGB 조명 관련 정보가 포함되어 있습니다.