카 프레소 560.01

Capresso Infinity Conical Burr Grinder Model 560.01 User Manual

모델: 560.01

소개

The Capresso Infinity Conical Burr Grinder Model 560.01 is designed to provide precise and consistent coffee grinding for various brewing methods. Its commercial-grade solid steel conical burrs ensure optimal flavor and aroma preservation by minimizing heat buildup during grinding. This manual provides essential information for the safe and efficient operation, maintenance, and care of your grinder.

중요한 보호 조치

전기 제품을 사용할 때는 화재, 감전, 인명 피해 위험을 줄이기 위해 다음 사항을 포함한 기본적인 안전 예방 조치를 항상 따라야 합니다.

제품 구성 요소

Familiarize yourself with the main components of your Capresso Infinity Conical Burr Grinder.

Capresso Infinity Conical Burr Grinder with bean hopper and ground coffee container

그림 1: 전체 view of the Capresso Infinity Conical Burr Grinder, showing the main unit, bean hopper, and ground coffee container.

Close-up of the Capresso Infinity grinder's control panel with grind settings and timer dial

Figure 2: Close-up of the control panel, highlighting the grind fineness settings (Extra Fine, Fine, Medium, Coarse) and the timer dial.

Coffee beans visible inside the clear bean hopper of the Capresso Infinity grinder

Figure 3: The transparent bean hopper filled with whole coffee beans, ready for grinding.

Ground coffee collected in the clear container of the Capresso Infinity grinder

Figure 4: The ground coffee container, showing freshly ground coffee collected after operation.

Close-up of the commercial-grade solid steel conical burrs, separated from the grinder

Figure 5: The precision-engineered conical burrs, responsible for uniform grinding.

설정

  1. 모든 구성품을 풀고 모든 포장재를 제거하세요.
  2. 분쇄기를 안정적이고 평평하며 건조한 표면에 놓으세요.
  3. Ensure the ground coffee container is securely inserted into its slot at the front of the grinder.
  4. Place the bean hopper onto the top of the grinder, aligning the black dot on the hopper with the desired grind setting (Extra Fine, Fine, Medium, Coarse) on the grinder base. Twist the hopper clockwise until it locks into place.
  5. 전원 코드를 120V AC 콘센트에 꽂으세요.

작동 지침

커피 원두를 갈려면 다음 단계를 따르세요.

  1. 빈 호퍼 채우기: Remove the lid from the bean hopper and pour whole coffee beans into it. The hopper has an 8.8-ounce capacity. Replace the lid securely.
  2. 분쇄 굵기를 선택하세요: Rotate the bean hopper to align the black dot with your desired grind setting. The grinder offers 16 settings, categorized as Extra Fine, Fine, Medium, and Coarse.
    • 매우 미세함: Ideal for Turkish coffee.
    • 좋아: 에스프레소 머신에 적합합니다.
    • 중간: Recommended for drip coffee makers.
    • 조잡한: 프렌치 프레스와 퍼콜레이터에 가장 적합합니다.
  3. 분쇄 시간 설정: Turn the timer dial located on the front of the grinder to select the desired grinding duration, from 5 to 60 seconds. The grinder will automatically stop once the set time has elapsed.
  4. 연삭 시작: The grinder will begin operation once the timer is set and the hopper is correctly positioned.
  5. 분쇄된 커피 수집: Once grinding is complete, carefully remove the ground coffee container from the front of the grinder.

Video 1: This video demonstrates the key features and basic operation of the Capresso Infinity Conical Burr Grinder, including filling the hopper, selecting grind settings, and collecting ground coffee.

비디오 2: 이 비디오는 다음을 제공합니다.view of the Capresso Infinity coffee grinder, showcasing its ease of use, grind settings, and the process of grinding coffee beans.

유지관리 및 청소

정기적으로 청소하면 최적의 성능을 보장하고 분쇄기의 수명을 연장할 수 있습니다.

  1. Unplug the Grinder: 청소하기 전에 항상 전원 콘센트에서 기기의 플러그를 뽑으십시오.
  2. 빈 호퍼 제거: Rotate the bean hopper counter-clockwise to align the black dot with the "unlock" symbol, then lift it off.
  3. 위쪽 버 제거: The upper burr is removable for easy cleaning. Lift it out of the grinding chamber.
    A hand removing the upper conical burr from the Capresso Infinity grinder for cleaning

    Figure 6: Removing the upper burr for thorough cleaning of the grinding mechanism.

  4. Clean Burrs and Chamber: Use the included cleaning brush to remove any residual coffee grounds from both the upper and lower burrs, as well as the grinding chamber.
  5. 깨끗한 분쇄 커피 용기: Empty and wash the ground coffee container with warm, soapy water. Ensure it is completely dry before reinserting.
  6. 외부 닦기: 그라인더 외부를 광고로 닦으세요amp 옷감. 본체를 물에 담그지 마십시오.
  7. 재조립: Place the cleaned upper burr back into the grinding chamber, then reattach the bean hopper by aligning the black dot and twisting clockwise to lock.

문제 해결

문제가능한 원인해결책
그라인더가 시작되지 않습니다.Power cord not plugged in; bean hopper not correctly locked; timer not set.Ensure power cord is securely plugged in. Verify the bean hopper is locked into position. Set the timer dial to a desired grinding duration.
일관성 없는 분쇄.분쇄 날이 더럽거나 마모되었거나, 원두 종류에 맞는 분쇄 설정이 잘못되었습니다.Clean the burrs and grinding chamber thoroughly. Adjust the grind setting to a finer or coarser option as needed for your coffee beans and brewing method.
분쇄 커피의 과도한 정전기 점착.Dry air conditions; natural static buildup during grinding.This is a common issue with coffee grinders. Try lightly misting the coffee beans with water before grinding to reduce static. Alternatively, allow the ground coffee to sit in the container for a few minutes before emptying.
Grinder jams.Foreign object in beans; excessive amount of beans; burrs clogged.Unplug the grinder. Remove the bean hopper and upper burr. Inspect for and remove any foreign objects. Clean the burrs and grinding chamber. Do not overfill the hopper.

명세서

보증 및 지원

The Capresso Infinity Conical Burr Grinder Model 560.01 comes with a one-year limited warranty. For detailed warranty information, product support, or to purchase replacement parts, please visit the official Capresso web사이트를 방문하거나 고객 서비스에 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

추가 지원이 필요하면 다음을 방문하세요. 아마존에서 카프레소 스토어를 만나보세요.

관련 문서 - 560.01

사전view 카프레소 인피니티 플러스 원뿔형 버 그라인더: 사용자 설명서 및 사용 지침
Capresso Infinity Plus 원뿔형 버 그라인더(모델 #570 및 #575)에 대한 자세한 사용 설명서, 안전 지침, 청소 팁 및 보증 정보를 확인하세요. 완벽한 커피 분쇄도를 얻는 방법을 알아보세요.
사전view Capresso Infinity Burr Grinder: User Manual for Models #560 & #565
This user manual provides essential safety instructions, operating guidelines, cleaning procedures, and warranty information for the Capresso Infinity Burr Grinder, models #560 and #565.
사전view Capresso Infinity 원뿔형 버 그라인더 사용 설명서 및 지침
Capresso Infinity 원뿔형 버 분쇄기(모델 #560, #565)에 대한 포괄적인 사용 설명서 및 작동 지침으로, 안전 예방 조치, 설치, 분쇄 설정, 청소 및 보증 정보를 자세히 설명합니다.
사전view Capresso Grind Select 커피 버 그라인더 - 모델 597.04 - 사용 설명서 및 보증
Capresso Grind Select Coffee Burr Grinder(모델 597.04)에 대한 포괄적인 가이드로, 중요한 안전 장치, 작동 지침, 청소, 문제 해결 및 보증 정보를 다룹니다.
사전view Capresso 스테인리스 스틸 버 그라인더(모델 580 및 585) - 사용 설명서 및 보증
Capresso 580 및 585 스테인리스 스틸 버 그라인더의 사용 설명서와 보증 정보로, 설치, 작동, 청소 및 안전 지침이 포함되어 있습니다.
사전view 카프레소 인피니티 버 그라인더 제한 보증
이 문서는 미국 내 카프레소 인피니티 버 그라인더(모델 #560 및 #565)에 대한 1년 제한 보증에 대한 세부 정보를 제공하며, 재료 및 제조상의 결함을 보증 대상으로 하고, 보증 제외 사항 및 제한 사항을 명시합니다.