소개
The Canon Speedlite 200E is a compact and economical clip-on TTL automatic flash unit designed for use with Canon EOS cameras. This manual provides essential information for the proper setup, operation, and maintenance of your Speedlite 200E to ensure optimal performance.
Image: Canon Speedlite 200E Flash unit. This image displays the compact design of the flash unit, highlighting its shoe mount for attachment to a camera.
제품 특징
- Clip-on TTL Automatic Flash: Provides automatic through-the-lens flash exposure control.
- Compact and Economical Design: Designed for portability and cost-effectiveness.
- Canon EOS Camera Compatibility: Engineered to work with Canon EOS camera systems.
- 가이드 번호: Features a guide number of 20 meters (65 feet) at ISO 100.
- 플래시 커버리지: Offers flash coverage suitable for focal lengths as wide as 35mm.
설정
1. 배터리 설치
- Locate the battery compartment cover on the Speedlite 200E.
- Open the cover and insert four (4) AAA-size batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- 배터리 덮개를 단단히 닫으세요.
Note: Four AAA batteries are required for operation. The product listing indicates "4 AA batteries" as included components, which may be a discrepancy or for a different accessory. Please use AAA batteries for the flash unit.
2. 카메라에 부착하기
- Ensure both the camera and the Speedlite 200E are powered off.
- Slide the mounting foot of the Speedlite 200E into the hot shoe of your Canon EOS camera until it clicks into place.
- If present, tighten the locking mechanism on the flash unit to secure it to the camera's hot shoe.
작동 지침
기본 동작
- 전원 켜기: Turn on your Canon EOS camera and then the Speedlite 200E.
- 자동 노출: The Speedlite 200E operates as a TTL (Through-The-Lens) automatic flash. It communicates with your Canon EOS camera to determine the appropriate flash output for correct exposure.
- 촬영: Frame your shot and press the camera's shutter button. The flash will fire automatically, providing illumination.
Guide Number and Coverage
- The guide number of 20 meters (65 feet) at ISO 100 indicates the flash's power output. This value can be used to calculate approximate flash-to-subject distance for manual exposure settings, though the 200E primarily functions in TTL mode.
- The flash provides coverage for lenses with focal lengths as wide as 35mm. For wider lenses, some vignetting or uneven illumination may occur.
유지
청소
- 부드럽고 마른 천을 사용하여 플래시 장치 외부를 닦으세요.
- 완고한 먼지에는 약간 damp천에 물이나 순한 세척액을 묻힌 후 바로 닦아 말리세요.
- Do not use strong solvents or abrasive cleaners, as these can damage the finish or electronic components.
- Keep the flash contact points on the mounting foot clean and free of debris to ensure proper communication with the camera.
배터리 관리
- 플래시를 장기간 사용하지 않을 경우 누액 및 손상을 방지하기 위해 배터리를 제거하십시오.
- Replace all four batteries simultaneously with new ones. Do not mix old and new batteries or different types of batteries.
문제 해결
| 문제 | 가능한 원인 / 해결책 |
|---|---|
| 플래시가 터지지 않습니다. |
|
| Flash output is too bright (over-flash). |
|
| Flash is not compatible with my Canon EOS camera. |
|
명세서
| 모델 번호 | 200년대 |
| 상표 | 정경 |
| 제품 치수 | 6.7 x 6.2 x 6.2 인치 |
| 품목 무게 | 5.8 온스 |
| 필요한 배터리 | AAA 배터리 4개 |
| 호환 가능한 마운팅 | 캐논 EOS |
| 카메라 플래시 유형 | Slave (TTL Automatic) |
| 플래시 동기화 속도 | 1/250 (maximum) |
| 가이드 번호 | 20 meters / 65 feet (at ISO 100) |
| 플래시 커버리지 | As wide as 35mm focal length |
| ASIN | B00004THD3 |
| 첫 번째 이용 가능 날짜 | 31년 2000월 XNUMX일 |
보증 및 지원
For information regarding warranty coverage, technical support, or service for your Canon Speedlite 200E, please refer to the warranty card included with your product or visit the official Canon support web해당 사이트를 참조하시거나, 캐논 고객 서비스 센터에 직접 문의하여 도움을 받으실 수도 있습니다.
공식 캐논 Web대지: https://www.usa.canon.com/support
