1. 안전 정보
Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and serious personal injury. Read and understand all instructions before operating this machine.
일반 안전 규칙
- 적절한 개인 보호 장비(PPE)를 착용하세요. Always wear safety glasses or goggles, hearing protection, and a dust mask. Heavy-duty gloves are recommended.
- 작업 공간을 깨끗하고 밝은 상태로 유지하십시오. 어수선하거나 어두운 곳은 사고를 초래합니다.
- 폭발성 환경에서는 작동하지 마십시오. Do not use power tools in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- 어린이와 주변 사람들을 멀리하십시오: 주의가 산만해지면 통제력을 잃을 수 있습니다.
- 안전한 작업물: 항상 clamp the material firmly before cutting.
- Avoid awkward body positions: 항상 적절한 발판과 균형을 유지하십시오.
- 전원 분리: Always disconnect the machine from the power source before making adjustments, changing accessories, or performing maintenance.
Specific Cut-Off Machine Safety
- Use correct abrasive wheels: Only use 14-inch abrasive cut-off wheels rated for the machine's RPM.
- Inspect wheel before use: Do not use cracked, chipped, or damaged wheels.
- Ensure wheel guard is in place: Never operate the machine without the wheel guard properly installed and functioning.
- Be aware of sparks and debris: Cutting operations produce sparks and hot debris. Clear the area of flammable materials and ensure bystanders are at a safe distance.
- Allow wheel to reach full speed: Before beginning a cut, allow the abrasive wheel to reach its full operating speed.
2. 제품 오버view
The Milwaukee 6175-8 is a 14-inch abrasive cut-off machine designed for efficient and portable cutting of various metal materials. It features a powerful 15 amp motor, a durable cast-iron base, and a spindle lock for convenient blade changes. The pivoting wheel guard enhances safety during operation.
주요 특징
- 강력한 15 amp motor for demanding cutting tasks.
- Robust cast iron base for stability and durability.
- Spindle lock mechanism for quick and easy abrasive wheel changes.
- Pivoting wheel guard for enhanced user protection.
- Integrated one-piece carrying handle for portability.
- Quick-release locking vise for secure material clamping and angle cutting up to 45 degrees.
Image 2.1: The Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine. This image shows the overall design of the machine, including the motor housing, cutting arm, base, and vise assembly.
3. 설정
풀기 및 검사
- 기계와 모든 부속품을 포장에서 조심스럽게 꺼내세요.
- Inspect the machine for any damage that may have occurred during shipping. If any damage is found, do not operate the machine and contact customer service.
- Verify that all components listed in the packing list are present: cut-off machine, vise, abrasive wheel, and hex wrench.
작업 영역 준비
- Place the machine on a stable, level surface capable of supporting its weight and the workpiece.
- Ensure adequate clearance around the machine for safe operation and material handling.
- Clear the area of any flammable materials due to sparks generated during cutting.
Abrasive Wheel Installation
- 기계의 전원 플러그가 뽑혀 있는지 확인하세요.
- 스핀들 잠금 버튼을 길게 누릅니다.
- Using the provided hex wrench, loosen and remove the arbor nut and outer flange.
- Place the new 14-inch abrasive wheel onto the arbor, ensuring it is seated correctly against the inner flange.
- Reinstall the outer flange and arbor nut. Tighten the arbor nut securely while holding the spindle lock button. Do not overtighten.
- Release the spindle lock button and manually rotate the wheel to ensure it spins freely and is properly aligned.
Vise Adjustment
- The quick-release vise allows for rapid clamping 및 삼촌amp공작물을 채취합니다.
- To adjust for different material sizes, loosen the vise handle and slide the movable jaw to the desired position.
- For angle cuts, the vise can be pivoted up to 45 degrees. Loosen the appropriate bolts on the base, adjust the vise to the desired angle using the angle guide, and then securely tighten the bolts.
4. 사용 설명서
전원 연결
- Connect the machine to a standard 120 Volts AC power outlet. Ensure the circuit can handle the 15 amp motor load.
재료 Clamp잉
- Place the workpiece firmly against the fence and within the vise jaws.
- Tighten the quick-release vise handle to secure the material. Ensure the material is held firmly and will not shift during the cut.
- The machine can cut pipe up to 5" O.D., bar stock up to 3-5/8", and square stock up to 5".
컷 만들기
- 공작물이 단단히 고정되었는지 확인하십시오.amped and the area is clear.
- Lower the cutting arm slightly to ensure the abrasive wheel clears the workpiece.
- Press the ON switch to start the motor. Allow the abrasive wheel to reach its full operating speed of 3900 RPM before beginning the cut.
- Slowly and steadily lower the cutting arm, allowing the abrasive wheel to cut through the material. Do not force the cut; let the wheel do the work.
- Once the cut is complete, release the ON switch and allow the wheel to stop rotating before raising the cutting arm.
- 삼촌amp the workpiece and remove it from the machine.
5. 유지관리
Regular maintenance ensures the longevity and safe operation of your Milwaukee cut-off machine. Always disconnect the machine from the power source before performing any maintenance.
청소
- After each use, clean the machine to remove metal dust and debris. Use a brush or compressed air.
- 플라스틱 부품을 손상시킬 수 있는 용제나 독한 화학 물질을 사용하지 마십시오.
- 모터 과열을 방지하기 위해 통풍구를 막지 않도록 하십시오.
Abrasive Wheel Replacement
- Replace abrasive wheels when they become worn down, chipped, or damaged. Refer to the "Abrasive Wheel Installation" section for detailed steps.
일반 검사
- 전원 코드에 손상이 있는지 주기적으로 점검하십시오. 손상된 경우 자격을 갖춘 서비스 기술자에게 교체를 의뢰하십시오.
- Check all nuts, bolts, and screws for tightness. Tighten as necessary.
- Ensure the wheel guard operates freely and returns to its protective position.
- Inspect the vise mechanism for smooth operation and secure clamp주고받음.
6. 문제 해결
이 섹션에서는 절단기 사용 중 발생할 수 있는 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기계가 시작되지 않습니다 | 전원 공급이 없습니다 전원 코드 결함 모터 과부하 보호 장치가 작동했습니다. | 전원 콘센트와 회로 차단기를 확인하세요 전원 코드의 손상 여부를 점검하고 필요하면 교체하십시오. 모터가 식을 때까지 기다리고 부하를 줄이십시오. |
| 절단 중 과도한 불꽃이나 연기 발생 | Dull or incorrect abrasive wheel 강제로 잘라내기 Improper material clamp잉 | Replace with a new, sharp abrasive wheel Reduce feed pressure; allow wheel to cut at its own pace 공작물이 단단히 고정되었는지 확인하십시오.amped |
| 부정확한 절단 | Loose workpiece Vise not set correctly Worn abrasive wheel | 안전하게 clamp 공작물 Check vise angle and tightness Replace the abrasive wheel |
| 기계가 과도하게 진동함 | 느슨한 구성 요소 Damaged or unbalanced abrasive wheel Unstable work surface | 모든 패스너를 확인하고 조이세요 Inspect and replace abrasive wheel if damaged Ensure machine is on a stable, level surface |
7. 사양
Technical specifications for the Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine.
| 특징 | 사양 |
|---|---|
| 모델 번호 | 6175-8 |
| 모터 Amp에라 지 | 15 Amps |
| 권tage | 120 볼트 AC |
| 무부하 RPM | 3900 RPM |
| 블레이드 직경 | 14 인치 |
| 아버 크기 | 1 인치 |
| 최대 절단 각도 | 45도 |
| Workpiece Capacity (Pipe O.D.) | 5 인치 |
| Workpiece Capacity (Bar Stock) | 3-5/8 인치 |
| Workpiece Capacity (Square Stock) | 5 인치 |
| 품목 무게 | 52.5 파운드 |
| 전원 | 코드식 전기 |
| 특징 | 스핀들 잠금 |
| 규정 준수 | 미국 산업 안전 보건 청 (OSHA) |
8. 보증 및 지원
보증 정보
This Milwaukee 6175-8 Abrasive Cut-Off Machine is a reconditioned product. Reconditioned Milwaukee Products are covered by a 5년 제한 보증 through the Milwaukee factory or an authorized service center. This warranty covers defects in material and workmanship. Please retain your proof of purchase for warranty claims.
고객 지원
For technical assistance, service, or warranty inquiries, please contact Milwaukee customer support or an authorized Milwaukee service center. Contact information can typically be found on the official Milwaukee web사이트 또는 구매 시 제공된 설명서를 참조하세요.
