소개
The Maxell XL-II 90-Minute Blank Audio Cassette is a high-bias (Type II) audio recording tape designed for superior sound reproduction. This cassette offers 90 minutes of recording time, making it suitable for various audio recording applications, particularly when high fidelity is desired. It is engineered to provide pure, natural sound with a wide dynamic range and high output, featuring an energy-efficient and anti-resonance cassette mechanism.
Figure 1: Front packaging of the Maxell XL-II 90-Minute Audio Cassette, highlighting its high bias and suitability for CD recording.
설정
To prepare your Maxell XL-II 90-Minute audio cassette for use, follow these steps:
- 호환성 검사 : Ensure your cassette deck or recorder supports Type II (High Bias / CrO2) audio cassettes. Using a Type II cassette in a deck not configured for it may result in suboptimal recording or playback quality.
- Unpack the Cassette: Carefully remove the cassette from its packaging.
- 라벨링: Use the provided labels or a permanent marker to clearly identify the contents of your recording on the cassette shell and J-card.
- Tape Slack Adjustment: Before inserting, ensure there is no slack in the tape by gently inserting a pencil or similar object into one of the hub holes and turning it clockwise until the tape is taut.
작동 지침
This section outlines the general procedures for recording and playing audio on your Maxell XL-II 90-Minute cassette.
오디오 녹음
- 카세트를 삽입하세요: Open the cassette compartment of your deck and insert the Maxell XL-II cassette with the desired side (A or B) facing up, ensuring the tape window is visible. Close the compartment securely.
- Select Bias Setting: On your cassette deck, select the 'Type II' or 'High Bias' setting. Some decks may automatically detect the tape type.
- Set Recording Levels: Connect your audio source (e.g., CD player, turntable, computer) to the input jacks of your cassette deck. Adjust the recording level controls to ensure the audio signal does not peak into the red zone on the deck's meters, which can cause distortion. Aim for levels that are consistently high but avoid clipping.
- 녹화 시작: Press the 'Record' and 'Play' buttons simultaneously (or as per your deck's instructions) to start recording. Begin playing your audio source.
- 모니터 녹화: Continuously monitor the recording levels and sound quality during the process.
- 녹음 중지: Press the 'Stop' button on your deck when finished.
- Protect Recording: To prevent accidental erasure, break off the small plastic tabs located on the top edge of the cassette for the recorded side.
오디오 재생
- 카세트를 삽입하세요: Insert the recorded Maxell XL-II cassette into your deck.
- Select Playback Settings: Ensure your deck's playback settings (e.g., Dolby Noise Reduction, EQ) are appropriate for the recording.
- 재생 시작: '재생' 버튼을 누르세요.
- 볼륨 조절: 볼륨을 조정하십시오. amplifier or receiver to your desired listening level.
Figure 2: Back packaging of the Maxell XL-II 90-Minute Audio Cassette, detailing recording specifications and features.
유지
Proper care of your Maxell XL-II cassettes will ensure longevity and optimal performance.
- 저장: Store cassettes in their cases, away from direct sunlight, high temperatures, humidity, and strong magnetic fields (e.g., speakers, motors).
- 손질: Avoid touching the magnetic tape surface. Handle cassettes by their edges.
- 카세트 데크 유지 관리: Regularly clean the heads, capstan, and pinch roller of your cassette deck to prevent tape wear and maintain sound quality. Demagnetize the heads periodically.
- 떨어뜨리지 않도록 주의하세요: Do not drop cassettes, as this can damage the shell or internal components.
문제 해결
If you encounter issues with your Maxell XL-II cassette, consider the following:
- Poor Sound Quality (Dull/Muffled):
- Ensure your cassette deck's bias setting is correctly set to Type II (High Bias).
- Clean the cassette deck's heads and pinch rollers.
- Check if the recording levels were set too low during recording.
- 왜곡된 소리:
- Recording levels may have been set too high, causing clipping. Re-record with lower levels.
- Check for damage to the tape or cassette shell.
- Tape Jamming or Snapping:
- Ensure the tape is taut before insertion (no slack).
- Check for physical damage to the cassette shell or tape.
- Clean and inspect your cassette deck's transport mechanism for obstructions or worn parts.
- No Recording Occurs:
- Verify that the record-protection tabs on the top edge of the cassette are intact. If they are broken off, cover the holes with adhesive tape to enable recording.
- Ensure your cassette deck is in record mode (usually by pressing 'Record' and 'Play' simultaneously).
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 맥셀 |
| 모델 번호 | 139410 |
| 기록 용량 | 90분 (한쪽 면당 45분) |
| 바이어스 유형 | High Bias (Type II / CrO2) |
| 제품 치수 | 4.25 x 2.75 x 0.5 인치 |
| 품목 무게 | 2.4 온스 |
| 한국어: | 025215136412 |
| 제조업체 | 맥셀 |
보증 정보
Maxell provides a 평생 보증 for this product. In the event of any manufacturing defect, Maxell offers free replacement of the defective product. For specific details regarding the warranty claim process, please refer to the information provided inside the product packaging or contact Maxell customer support.
지원 정보
For further assistance or inquiries regarding your Maxell XL-II 90-Minute Blank Audio Cassette, please contact Maxell customer support:
- MAXELL CORPORATION OF AMERICA: 미국 뉴저지
- MAXELL CANADA: 1-800-661-9500로 전화하세요
Additional support resources may be available on the official Maxell web대지.
