ErGear EGESD32

ErGear 유리 스탠딩 데스크 사용 설명서

Model: EGESD32

소개

Thank you for choosing the ErGear Glass Standing Desk. This electric adjustable height desk features a durable tempered glass top, integrated storage drawer, and convenient USB charging ports, designed to enhance your workspace with both elegance and functionality. This manual provides essential information for the safe and efficient use of your new desk.

ErGear Glass Standing Desk with monitors and laptop
The ErGear Glass Standing Desk, showcasin세련된 디자인과 통합된 기능 덕분입니다.

설정

The ErGear Glass Standing Desk is designed for simple assembly. The glass top comes pre-assembled, significantly reducing setup time. Follow these general steps for assembly:

  1. Carefully unpack all components and ensure all parts are present.
  2. Attach the desk legs to the pre-assembled desktop frame.
  3. 받침대를 책상 다리 아래쪽에 단단히 고정하십시오.
  4. Connect the power cable and ensure all connections are secure.

Refer to the included assembly diagram for detailed instructions specific to your model.

폭발했다 view of desk components for simple three-step assembly
Visual representation of the desk components for a straightforward assembly process.

작동 지침

높이 조정

Your ErGear standing desk features smooth electric height adjustment. Use the control panel located on the front edge of the desk to adjust the height.

  • 위/아래 버튼(+/-): Press and hold the '+' button to raise the desk and the '-' button to lower it. Release the button at your desired height.
  • 메모리 사전 설정(1, 2, 3): Save up to three preferred height settings. To save a height, adjust the desk to the desired level, then press 'M' followed by the number button (1, 2, or 3) you wish to assign. The desk will beep to confirm. To recall a saved height, simply press the corresponding number button.
Control panel with M, +, -, 1, 2, 3 buttons
The convenient control panel for height adjustment and memory presets.
Man sitting at low desk, standing at high desk, illustrating smooth height adjustment
Demonstration of the desk's smooth height adjustment from sitting to standing positions.

USB 충전 포트

The desk is equipped with two USB charging ports (Type-A and Type-C) on the control panel for convenient charging of your devices.

  • Simply plug your device's charging cable into the appropriate USB port.
  • Ensure the desk is powered on for the charging ports to function.
USB ports visible on the desk for charging devices
Integrated USB charging ports keep your devices powered.

보관 서랍

The integrated two-section drawer provides discreet storage for your office essentials, helping to keep your workspace tidy.

Two-section drawer for easy organization
The spacious two-section drawer helps maintain an organized desktop.

유지

To ensure the longevity and optimal performance of your ErGear Glass Standing Desk, follow these maintenance guidelines:

  • 유리 상판 청소하기: The tempered glass surface is easy to clean. Use a soft, damp cloth with a mild glass cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the surface. For dry-erase functionality, use only dry-erase markers and wipe clean with a dry-erase eraser or soft cloth.
  • 프레임과 다리: Wipe down the metal frame and legs with a soft, dry cloth to remove dust.
  • 정기 점검: 모든 나사와 볼트가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
  • 과부하를 피하세요: 리프팅 메커니즘 손상을 방지하기 위해 최대 하중 용량인 110파운드(50kg)를 초과하지 마십시오.
Durable tempered glass top that is strong, writable, and easy to clean
The tempered glass surface offers durability and ease of cleaning.

문제 해결

If you encounter any issues with your ErGear Glass Standing Desk, please refer to the following common troubleshooting tips:

  • 책상이 움직이지 않음: Check if the power cable is securely plugged into both the desk and the wall outlet. Ensure there are no obstructions under or around the desk that might impede its movement.
  • 높이 불균형: If the desk appears uneven, try resetting the system. Consult the full product manual for specific reset procedures, which typically involve holding down certain buttons for a few seconds.
  • 오류 코드: If the control panel displays an error code, unplug the desk for 10-15 minutes, then plug it back in. If the error persists, contact customer support.
  • USB 포트가 충전되지 않음: Verify the desk is powered on. Try a different USB cable or device to rule out issues with the cable or device itself.

For more complex issues or if troubleshooting steps do not resolve the problem, please contact ErGear customer support.

명세서

특징세부 사항
데스크탑 크기55인치(L) x 24인치(W)
높이 조절 범위28.3인치에서 46.5인치까지
중량 용량110파운드(50kg)
재료Tempered Glass (Desktop), Steel (Frame)
제어판디지털 디스플레이, 상/하 버튼, 3개의 메모리 프리셋
충전 포트2 x USB (Type-A, Type-C)
서랍 치수25.5 inches (L) x 12.4 inches (W) (approximate)
Product dimensions including desktop size, height range, and weight capacity
제품의 상세 크기와 최대 하중 용량 정보입니다.

사용자 팁

  • Utilize the Dry-Erase Surface: The tempered glass top doubles as a dry-erase board. Keep a dry-erase marker and eraser handy for quick notes, reminders, or brainstorming sessions directly on your desk.
  • Optimize with Memory Presets: Program your ideal sitting and standing heights into the memory presets (1, 2, 3) for quick and effortless transitions throughout your workday.
  • 정리정돈을 유지하세요: Make full use of the integrated drawer to store pens, notebooks, and other small items, maintaining a clutter-free and productive workspace.
  • 케이블 관리 : Consider using cable ties or clips to manage power cords and charging cables, keeping them tidy and out of the way for a cleaner aesthetic and safer environment.

보증 및 지원

ErGear products are designed for quality and durability. For warranty information, product support, or to report any issues, please contact ErGear customer service through the retailer where you purchased the product or visit the official ErGear website. Please have your model number (EGESD32) and purchase date available when contacting support.

관련 문서 - EGESD32

사전view ErGear 전동 스탠딩 데스크 사용 설명서
ErGear 전동 스탠딩 데스크(EGESD32/EGESD33)의 포괄적인 사용 설명서입니다. 사양, 조립, 작동, 안전 및 문제 해결 방법을 다룹니다. 자세한 사용 설명서에는 오류 코드에 대한 설명이 포함되어 있습니다.
사전view Ergear 전동 스탠딩 데스크 MSESD202-80A 사용 설명서 및 조립 가이드
Ergear 전동 스탠딩 데스크(모델 MSESD202-80A)의 조립 방법, 안전 정보, 컨트롤러 작동법 및 문제 해결 방법을 포함한 종합 안내서입니다.
사전view ErGear 높이 조절식 전동 스탠딩 데스크 설치 설명서
ErGear 높이 조절 전동 스탠딩 데스크(55 x 28인치) 설치 가이드입니다. 이 설명서는 ErGear 높이 조절/스탠딩 데스크의 조립, 작동 및 문제 해결에 대한 단계별 지침을 제공합니다.
사전view Ergear EGESD1 전동식 스탠딩 데스크 프레임 설치 설명서
Ergear EGESD1 전동 스탠딩 데스크 프레임의 조립 및 작동에 대한 종합 가이드입니다. 기술 사양, 설치 단계, 문제 해결 및 사용 설명서가 포함되어 있습니다.
사전view ErGear 48인치 전동 스탠딩 데스크 사용 설명서
Comprehensive instruction manual for the ErGear 48" Electric Standing Desk (Models EGESD5B-4, EGESD5V-4), covering assembly, operation, settings, and troubleshooting.
사전view ErGear 40인치 전동 스탠딩 데스크 사용 설명서
Instruction manual for the ErGear 40" Electric Standing Desk, covering assembly, usage, and troubleshooting.