소개
This manual provides instructions for the FMS 3-in-1 Mini Brushless System Combo Set (C3891) and the accompanying Pinion Gear (C3684). The C3891 combo integrates a Receiver (RX), Electronic Speed Controller (ESC), and Brushless Motor into a compact unit, designed for use with specific RC vehicles such as the FCX24 K5 Black Brushless and FCX24 Power Wagon Brushless. The C3684 Pinion Gear is compatible with 1212 3200KV brushless motors.
Please read this manual thoroughly before installation and operation to ensure proper function and longevity of your product.
안전 정보
⚠ WARNING: California Proposition 65
이 제품은 캘리포니아주에서 암, 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 프탈레이트(DEHP)를 포함한 화학 물질에 노출될 수 있습니다. 자세한 내용은 다음을 참조하세요. www.P65Warnings.ca.gov.
- Always ensure proper ventilation when operating electronic components.
- Keep away from water and moisture to prevent damage to electronic parts.
- 시스템 전원을 켜기 전에 모든 연결이 안전한지 확인하십시오.
- 14세 이상 사용을 권장합니다. 6세 미만 어린이는 보호자의 감독이 필요합니다.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1x FMS 3-in-1 Mini Brushless System Combo Set (RX/ESC/Motor) - Model C3891
- 1x Pinion Gear - Model C3684
- (Optional, depending on purchase) Remote Control Transmitter
명세서
| 특징 | 세부 사항 |
|---|---|
| 제품 유형 | 3-in-1 Mini Brushless System Combo Set (RX/ESC/Motor) and Pinion Gear |
| Model Number (Combo) | C3891 (FS-RCABL-ESC-BS) |
| Model Number (Pinion Gear) | C3684 |
| 모터 유형 | Brushless 1212 3200KV (integrated in C3891) |
| ESC Lipo Compatibility | 2-3S 리포 |
| BEC 출력 | 5V/1A |
| 재료 | Plastic (housing), Metal (motor/gear components) |
| 추천연령 | 14세 이상 |
| 애플리케이션 | RC Cars (specifically FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless) |
| 기원 | 중국 본토 |
설치 지침
Follow these steps to install the FMS 3-in-1 Mini Brushless System Combo Set and Pinion Gear into your compatible RC vehicle.
- 차량 준비: Ensure your RC vehicle (e.g., FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless) is powered off and the battery is disconnected. Remove the existing motor and ESC/receiver unit if applicable.
- Install the Pinion Gear (C3684):
The C3684 Pinion Gear, designed for the 1212 3200KV brushless motor. Carefully attach the C3684 pinion gear to the shaft of the 1212 3200KV brushless motor (which is part of the C3891 combo). Ensure it is properly aligned with the vehicle's main gear and secured with the grub screw.
- Mount the C3891 Combo Unit:
상세한 view of the FMS FS-RCABL-ESC-BS (C3891) unit, showing ports and specifications. Securely mount the C3891 unit within your vehicle's chassis. Ensure it is protected from vibrations and potential impacts. The motor is integrated, so position the unit such that the motor can connect to the drivetrain.
- 전원에 연결: Connect your 2-3S LiPo battery to the power input of the C3891 ESC. Ensure correct polarity.
- Bind with Transmitter:
- 송신기를 켜세요.
- Power on the RC vehicle.
- Follow your transmitter's specific binding procedure. The C3891 unit (FS-RCABL-ESC-BS) will enter binding mode, indicated by a flashing LED.
- Once bound, the LED on the C3891 unit should become solid.
- 테스트 제어: Before full operation, test the steering and throttle responses to ensure they are functioning correctly and in the right direction. Adjust transmitter settings if necessary.
작동 지침
Once the system is installed and bound, you can begin operating your RC vehicle.
- 전원 켜기: Turn on your remote control transmitter first, then connect the battery to your RC vehicle.
- 운전: Use the throttle trigger/stick on your transmitter to control forward and reverse movement, and the steering wheel/stick for direction.
- 전원 끄기 : Always disconnect the battery from the RC vehicle first, then turn off your remote control transmitter. This prevents accidental runaway.
유지
- 청소: Regularly clean the motor and ESC/receiver unit to remove dirt, dust, and debris. Use a soft brush or compressed air. Avoid using liquids directly on electronic components.
- 검사: Periodically check all wiring and connections for signs of wear, damage, or looseness. Ensure the pinion gear is securely attached and free of excessive wear.
- 저장: When not in use, store the RC vehicle and its components in a dry, cool place away from direct sunlight. Disconnect the battery for long-term storage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No power to vehicle | Battery not connected, discharged battery, faulty wiring. | Check battery connection, charge battery, inspect wiring for damage. |
| 모터가 응답하지 않음 | Not bound to transmitter, motor wires loose, ESC error. | Re-bind transmitter, check motor connections, power cycle the ESC. |
| Erratic control/loss of signal | Interference, loose antenna, low transmitter battery. | Move to an area with less interference, check receiver antenna, replace transmitter batteries. |
| 모터 과열 | Incorrect gearing, excessive load, prolonged use. | Check pinion/spur gear ratio, reduce load, allow motor to cool down. |
보증 및 지원
보증 청구 또는 기술 지원이 필요한 경우 판매점이나 제조업체에 직접 문의하십시오. 보증 유효성 확인을 위해 구매 증빙 자료를 보관하십시오.
Refer to the official FMS website or your product's specific documentation for detailed warranty terms and conditions.
