1. 안전 정보
▲ Warnings:
- Always read this manual thoroughly before using the device. Improper operation may lead to product damage or serious injury.
- This device is intended for household use ONLY and is not suitable for industrial or outdoor use.
- Do not operate the device with wet hands or touch any electrical parts while wet to avoid electric shock.
- If the charger or plug is damaged, immediately stop use and contact qualified professionals to prevent accidents.
- Keep long hair, loose clothing, fingers, and other body parts away from air ducts and moving parts.
- Do not insert metal shavings, needles, wires, or other objects into the device openings to prevent electric shock and accidental injury.
- Do not disassemble, repair, or modify the device unless you are a qualified technical professional.
- Unplug the device from the power outlet if it will not be used for a long time to prevent power leakage, short circuits, fire, and other malfunctions.
- If any abnormalities occur during use, immediately turn off the power and contact our after-sales service.
- Promptly clean the dirty water tank after use to maintain clean ventilation ducts and prevent blockages, which can lead to reduced suction power, motor overheating, and shortened device lifespan.
- Store the device in a dry place after use. Damp environments can affect insulation and the lifespan of electrical components.
- Parts of the device located above the logo and base, which contain electrical components, must not be immersed in water or rinsed.
- Regularly check the floor brush elbow for debris. If blockages are found, use the multi-functional brush to clean it promptly to prevent blockages and reduced suction power.
- Ensure the device is turned off before replacing the roller brush.
- When using the device, add only the detergent provided or recommended by our company. Follow the specified proportions to avoid excessive foam, which can enter the motor and shorten its lifespan.
- All technologies and data in this manual are based on tests conducted by our company or designated third-party testing organizations. Our company reserves the right of final interpretation.
▲ Safe disposal methods for used batteries:
- The device's built-in battery contains materials harmful to the environment. When disposing of the device, the battery must be removed.
- 배터리를 제거하기 전에 장치를 꺼야 합니다.
- Please dispose of used batteries safely and correctly; do not discard them in fire, water, or soil.
- If a used battery leaks and comes into contact with skin or clothing, rinse the affected area with clean water to avoid skin irritation, and seek medical attention immediately.
2. 제품 오버view 및 구성 요소
The UWANT D500 is a versatile wet and dry vacuum cleaner designed for comprehensive floor cleaning. It features powerful suction, AI self-cleaning, and hot air drying.
Figure 2.1: UWANT D500 Wet Dry Vacuum Cleaner with key features highlighted.
2.1 주요 구성 요소
Figure 2.2: UWANT D500 package contents.
- Main Unit (with handle, clean/dirty water tanks, roller brush)
- Smart Base (Charging Station)
- HEPA 필터
- 롤러 브러시
- Cleaning Solution (500 ml)
- 청소용 브러시
2.2 LED Display and Controls
The device features an LED display and voice prompts to provide real-time information and guidance during operation.
Figure 2.3: LED Display and Voice Prompts.
LED 디스플레이에는 다음이 표시됩니다.
- 배터리 수준
- Cleaning mode (Smart, MAX, Dry)
- Electrolyzed Clean status
- 오류 표시기
Voice prompts provide alerts for low battery, full dirty water tank, and other operational statuses.
3. 설정
3.1 핸들 설치
Figure 3.1: Handle Installation and Removal.
- Insert the end of the handle vertically into the port of the main unit until you hear a click. Ensure the handle is firmly installed and does not wobble.
- To remove the handle, insert a hard object into the hole as shown in the diagram, press the pin, and simultaneously pull the handle upwards.
Note: Do not remove the sticker from the handle hole.
4. 사용 설명서
4.1 초기 준비
- Before first use, ensure the vacuum cleaner is charged. If the battery is low, charge the device fully (refer to charging instructions for details).
- By default, the Smart mode is activated upon powering on. You can switch to the appropriate mode depending on the cleaning situation.
- To change voice prompts: Press and hold the voice button for 4 seconds to enter the voice change function. The three mode indicators will flash, voice playback will pause, and other functions will operate as usual. Press the voice button repeatedly to cycle through different language voice prompts.
4.2 Adding Clean Water
Figure 4.1: Adding Clean Water to the Tank.
- Press the water tank release button to remove the clean/dirty water tank assembly.
- Open the water filling cap and pour in clean water.
- Securely close the water filling cap to ensure it is sealed and not loose.
- Reinstall the water tank assembly into the main unit until it clicks into place.
4.3 Starting Operation and Mode Selection
Video 4.1: UWANT D500 Product Demonstration. This video shows the vacuum cleaner in action, demonstrating its wet and dry cleaning capabilities, anti-tangle system, and self-cleaning features.
Figure 4.2: Three-level Cleaning Modes.
- Press the power button to turn on the device. By default, the Smart mode is activated.
- Press the 'Mode' button to cycle through cleaning modes:
- **Smart Mode**: For general cleaning of hair, dust, and food crumbs.
- **MAX Mode**: For stubborn stains, sauces, spills, and grease.
- **Dry Mode**: For dry vacuuming of hair, dust, and water puddles.
- The device can be used in a horizontal position for cleaning under furniture (e.g., tables, beds).
4.4 Water Flow Settings
Figure 4.3: Multi-level Intelligent Water Control.
The UWANT D500 offers three water flow settings to suit different floor types and cleaning needs:
- **High Mode**: For eliminating stubborn dirt and heavy stains.
- **Medium Mode**: Ideal for ceramic tiles and hard surfaces.
- **Low Mode**: Gentle cleaning for wooden floors.
Press the water flow button on the handle to switch between these settings.
5. 유지관리
5.1 Cleaning the Main Unit Body
- 청소하기 전에 장치가 꺼져 있는지 확인하세요.
- Wipe the device body with water or a neutral detergent. Wring out the cloth thoroughly before use to prevent water from entering the device.
5.2 더러운 물탱크 청소
Figure 5.1: Cleaning the Dirty Water Tank.
- When the dirty water tank is full or the device is off, remove the dirty water tank assembly.
- Hold the dirty water tank with one hand and remove the filter basket for draining with the other.
- Rinse the dirty water tank with clean water and cleaning agents.
- Clean the filter basket and HEPA filter.
- After the filter basket cover and HEPA filter are dry, reassemble them and reinstall them into the main unit.
5.3 Cleaning the Dirty Water Sensor
- If the sensor is blocked or the device is off, remove the dirty water tank assembly.
- Use the provided cleaning tool and clean water to clean the dirty water pipes and HEPA filter.
- After cleaning, reinstall the sensor into the dirty water tank.
5.4 자체 세척 기능
Figure 5.2: AI Self-Cleaning and Hot Air Drying.
- After use, place the device back on the smart base.
- Ensure the clean water tank is sufficiently filled and the dirty water tank is empty.
- The device will automatically start self-cleaning after 10 seconds. You can also press the self-cleaning button to manually start the process.
- After the roller brush cleaning is complete, the device will automatically switch to drying mode.
- Drying time is approximately ≤60 minutes. If you remove the device during drying, the process will stop, and you can use the device as usual.
- After self-cleaning is complete, please clean the dirty water tank.
5.5 Cleaning the Water Collection Port
Figure 5.3: Cleaning the Roller Brush and Water Collection Port.
- After removing the transparent roller brush window, press the roller brush release button and follow the arrow to remove the roller brush.
- Rinse the suction port with clean water.
- After cleaning, reinstall the roller brush and the transparent roller brush window into the device.
Note: Regularly clean debris from the roller brush using the cleaning tool to prevent affecting cleaning efficiency.
5.6 Cleaning the Smart Base
- Wipe with a paper towel or damp 옷감.
Note: The upper part of the device with the logo and the base, which contain electrical components, cannot be immersed in water or rinsed. The lower part of the device with the logo, the floor brush, and the base station tray can be rinsed directly but cannot be immersed in water.
6. 문제 해결
Please check the following points before contacting the service center.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 작동하지 않습니다 | 배터리 충전량이 부족합니다 | 사용 전 배터리를 충전하세요 |
| Nozzle or pipe is clogged | Check if the nozzle or pipe is blocked and clean them | |
| 흡입력이 약함 | HEPA 필터가 더럽습니다. | Clean the HEPA components |
| No water in the clean water tank | 물을 추가하세요 | |
| No water comes out of the nozzle | Water outlet O-ring detached | 수리를 위해 서비스 센터로 보내십시오. |
| 워터펌프 고장 | 수리를 위해 서비스 센터로 보내십시오. | |
| 파이프가 막혔습니다. | 수리를 위해 서비스 센터로 보내십시오. | |
| Product not charging | Charging cable incorrectly connected | 케이블 연결을 확인하세요 |
| Device not fully placed on charging base | Check device placement | |
| Poor contact between charging head and charging base | Check connection between charging head and charging base | |
| Dirty water tank indicator on | 더러운 물 탱크가 가득 찼습니다 | Empty water from dirty water tank |
| HEPA filter not installed | Install HEPA filter and dirty water tank | |
| Sudden power changes during discharge | Abnormal battery pack operation | Complete at least 3 full charge and discharge cycles |
| 자체 청소가 작동하지 않습니다 | 배터리가 너무 부족합니다. | 사용 전 배터리를 충전하세요 |
| No signal when dirty water tank is full | Dirty water detection electrode is dirty | Clean and wipe the dirty water detection electrode |
| Electrolyzed water sterilization lamp 에 없다 | Electrolyzed water sterilization not activated | Press and hold the mode button to activate electrolyzed water sterilization |
If other malfunctions occur or special tools are required, please contact the designated service center for repair and replacement.
7. 사양
Figure 7.1: UWANT D500 Product Dimensions and Specifications.
| 특징 | 사양 |
|---|---|
| 제품 이름 | Cordless Wet-Dry Vacuum Cleaner |
| 모델 | 디500 |
| 공칭 권tage | 21.6V |
| 전력(W) | 230와트 |
| 충전량tage | 26.5V |
| Smart Base Nominal Power | 160와트 |
| Smart Base Nominal Input | 220-240V~50/60Hz |
| Smart Base Nominal Output | 26.5V 0.6A |
| 무게 | 3 - 6 KG (Net weight ≈ 4.19 kg, Gross weight ≈ 7.98 kg) |
| 노즐 수 | 1-3개 노즐 |
| 작동 모드 수 | 3-4 (Dry, Smart, MAX) |
| 배터리 유형 | 리튬 이온 (2600mAh) |
| 액체 탱크 용량 | <3L |
| 터보 브러쉬 | 예 |
| 더스트박스 용량(L) | 0.6-1 L (Dirty water tank: 700ml) |
| 필터 유형 | 헤파 |
| 크기(mm) | 240*265*1107mm (Product: 235 x 256 x 1125 mm) |
| 액정표시장치 | 예 |
| 청소 경로 | 랜덤 타입 |
| 가방 또는 가방 없음 | 가방 없음 |
| 코드 길이 (m) | 무선 전화 |
| 타이밍 예약 | 아니요 |
| 특수 흡입 노즐 | 닦고 흡수하는 지면 브러시 |
| 먼지 저장 유형 | 아쿠아 필터 |
| 설치 | 똑바로 |
| 인증 | 인증: CE, ROHS |
| 기능 | 습식 및 건식 |
| 권tage | 5V |
| 기원 | 중국 본토 |
| 원격 제어 | 아니요 |
| 배터리 수명 | 30-59 min (Operating time ≈ 30 min) |
| 흡입관 | 17000파스칼 |
| 담수 탱크 | 650ml |
| 자체 세척 | Yes (Self-cleaning time: 120s) |
| 열풍 건조 | 65 °C (Drying time: ≈ 60 min) |
| 가장자리 청소 | 삼면 |
| 물 흐름 설정 | 높음, 중간, 낮음 |
8. 보증 및 지원
The UWANT D500 Wet Dry Vacuum Cleaner comes with a **Two-year warranty**.
For any questions regarding spare parts, customer service, or warranty claims, please refer to the official user manual PDF for detailed contact information. You can access the user manual 여기.
저희는 모든 문의에 24시간 이내에 답변드리는 것을 목표로 하고 있습니다.
9. 환경정보
9.1 유해 물질
The following table outlines the presence of hazardous substances in the components of the UWANT D500, in accordance with environmental regulations.
| 구성 요소 이름 | 납 (Pb) | 수은 (Hg) | 카드뮴 (Cd) | XNUMX가 크롬(Cr(VI)) | 폴리브롬화 비페닐(PBB) | 폴리브롬화 디페닐 에테르(PBDE) |
|---|---|---|---|---|---|---|
| 플라스틱 부품 | O | O | O | O | O | O |
| 금속 부품 | O | O | O | O | O | O |
| 모터 부품 | X | O | O | O | O | O |
| 워터 펌프 구성 요소 | X | O | O | O | O | O |
| PCB 구성 요소 | X | O | O | O | O | O |
| 배터리 | O | O | O | O | O | O |
Legend: O = Indicates that the hazardous substance contained in all homogeneous materials for this part is below the limit requirement of GB/T 26572. X = Indicates that the hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.
