Hagibis YPHN02

Hagibis 2230 M.2 NVMe SSD 인클로저 사용 설명서

Model: YPHN02

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your Hagibis 2230 M.2 NVMe SSD Enclosure. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

The Hagibis M.2 NVMe SSD Enclosure features a unique floppy disk design, offering 10Gbps high-speed data transmission via USB 3.2 Gen 2. It is compatible with M.2 NVMe SSDs of 2230 and 2242 specifications and is built with an all-aluminum alloy shell for efficient heat dissipation. The enclosure is compact and lightweight, making it highly portable.

패키지 내용

상자를 푼 후 패키지 내용물을 확인하세요.

  • Hagibis M.2 NVMe SSD Enclosure (Model YPHN02)
  • USB-C to USB-C Cable (approx. 150mm)
  • 드라이버/렌치
  • 써멀 패드
  • Lanyard/Keychain
  • 사용 설명서 (본 문서)
Hagibis M.2 NVMe SSD Enclosure and accessories
Image: Contents of the product package, including the SSD enclosure, USB-C cable, screwdriver, thermal pad, and lanyard.

명세서

특징세부 사항
브랜드 이름하기비스
모델 번호YPHN02
인터페이스 유형USB 3.2 Gen 2 (10Gbps), M.2 (M Key, B&M Key)
호환 SSDM.2 NVMe SSD (2230, 2242 sizes)
최대 순차 읽기 속도1024MB/초
최대 순차 쓰기 속도1024MB/초
재료알루미늄 합금
냉각핀No (Aluminum alloy shell provides heat dissipation)
플러그 유형USB-C
크기(대략)68mm (Length) x 6.1mm (Thickness)
무게(대략)53g
호환 장치PC, Laptop, iPhone 17 Pro (for external recording)
Diagram showing the dimensions of the SSD enclosure
Image: Product dimensions, showing a length of 68mm and thickness of 6.1mm.
Diagram showing compatible M.2 SSD key types
Image: Compatibility diagram for M.2 SSDs, indicating support for M Key and B&M Key, but not B Key.

설치 가이드

M.2 NVMe SSD를 외장 케이스에 설치하려면 다음 단계를 따르십시오.

  1. Unscrew the Enclosure: Use the provided screwdriver to loosen the screws on the side of the enclosure.
  2. 덮개를 엽니다: Carefully remove the top cover of the enclosure.
  3. SSD를 삽입하세요: Align your M.2 2230 or 2242 NVMe SSD with the M.2 slot inside the enclosure. Gently push the SSD into the slot at a parallel angle until it is fully seated.
  4. SSD를 보호하세요: Use the small screw provided to secure the SSD in place.
  5. Apply Thermal Pad (Optional but Recommended): Place the thermal pad over the SSD chip to aid in heat dissipation.
  6. 인클로저를 닫습니다. Replace the top cover and tighten the screws to secure the enclosure.
Video: A demonstration of how to install an M.2 NVMe SSD into the Hagibis enclosure, including unscrewing, inserting the SSD, and reassembling the unit.

중요 참고 사항:

  • Only supports SSDs with single-sided particles and a thickness of less than 2.5mm.
  • The product does not include sticky notes for DIY customization. The thickness of the DIY card slot is 0.5mm.

작업

  1. 장치에 연결: Use the provided USB-C to USB-C cable to connect the SSD enclosure to your computer, laptop, or compatible smartphone (e.g., iPhone 17 Pro).
  2. 저장소 접근: Once connected, your operating system should automatically detect the SSD enclosure as an external storage device. You can then access, transfer, and manage file다른 외장 드라이브와 마찬가지로 사용하시면 됩니다.
  3. 고속 데이터 전송: The USB 3.2 Gen 2 interface supports data transfer speeds up to 10Gbps, allowing for fast reading and writing of large files.
  4. External Recording (for compatible devices): For devices like the iPhone 17 Pro Max, the enclosure can be used for direct external recording in 4K/120Hz ProRes.
Hagibis SSD Enclosure connected to a laptop via USB-C cable
Image: The SSD enclosure connected to a laptop, demonstrating its use for data transfer and showing 10Gbps speed.
Hagibis SSD Enclosure magnetically attached to a smartphone
Image: The SSD enclosure attached to the back of a smartphone using magnetic patches, highlighting its portability and compatibility with mobile devices.

유지

  • 케이스를 깨끗하고 먼지가 없는 상태로 유지하세요. 청소 시에는 부드럽고 마른 천을 사용하세요.
  • 극한의 온도, 습도 또는 직사광선에 장치를 노출하지 마십시오.
  • Do not drop or subject the enclosure to strong impacts, as this may damage the internal SSD or the enclosure itself.
  • Ensure proper ventilation when in use, although the aluminum alloy design aids in heat dissipation.

문제 해결

장치가 인식되지 않습니다:
  • Ensure the USB-C cable is securely connected to both the enclosure and your device.
  • 컴퓨터의 다른 USB-C 포트에 연결해 보세요.
  • 케이블 문제인지 확인하기 위해 다른 USB-C 케이블로 테스트해 보세요.
  • Verify that the M.2 SSD is correctly installed and secured inside the enclosure.
  • Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drive is detected but unformatted. If so, format the drive.
느린 전송 속도:
  • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps) for optimal performance. Older USB versions will result in slower speeds.
  • Confirm that the SSD itself is capable of high read/write speeds.
  • 작은 것을 많이 옮기지 마세요 file동시에, 이는 전체 전송 속도를 감소시킬 수 있습니다.
사용 중에 케이스가 따뜻해집니다.
  • It is normal for the aluminum alloy enclosure to become warm during high-speed data transfers, as it is designed to dissipate heat from the SSD.
  • Ensure the thermal pad is correctly installed on the SSD.
  • 공기 흐름을 막을 수 있는 부드러운 표면에 케이스를 놓지 마십시오.
Issues with external video recording (e.g., with iPhone):
  • Some SSD brands, like WD, may have high power consumption which can lead to dropped recordings. It is recommended to use an SSD from another brand if you encounter this issue.
  • Ensure your iPhone model supports external ProRes recording.

사용자 팁

  • For maximum portability, utilize the included lanyard/keychain to attach the enclosure to your bag or keys.
  • The enclosure features a slot for DIY sticky notes (0.5mm thick) to personalize its appearance.
  • Consider using magnetic patches (not included) to attach the enclosure to compatible devices like smartphones for convenient external storage during mobile use.

보증 및 지원

Hagibis products are designed for reliability and performance. For any issues or inquiries, please contact Hagibis customer support.

  • 인증된 원본: 이 제품은 정품 인증을 받았습니다.
  • 보안 및 개인 정보 보호: Hagibis ensures safe payments and secure personal details, not sharing them with third parties without consent.

© 2024 하기비스. 모든 권리 보유.

Documents - Hagibis – YPHN02

관련 문서 없음