1. 서론
This manual provides essential information for the safe assembly, operation, and maintenance of your new Corona wardrobe. Please read these instructions carefully before beginning assembly and retain them for future reference.
The Corona wardrobe is a classic wooden wardrobe designed to offer ample storage space for clothes, shoes, and accessories. It features a sturdy construction from solid pine wood and engineered wood, complemented by metal handles and hinges.
2. 안전 정보
WARNING: Furniture tipping hazard!
To prevent serious injury or death from furniture tipping, this product MUST be permanently attached to the wall using the included wall attachment device. Always ensure the wardrobe is stable and securely fastened before use.
Image: Anti-tipping warning symbol.
- Always place heavy items in the lowest drawers or shelves.
- 어린이가 서랍, 문 또는 선반에 올라가거나 매달리지 않도록 하십시오.
- 한 번에 두 개 이상의 서랍을 열지 마십시오.
3. 패키지 내용
Before assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
While a detailed parts list is not provided, your package should contain:
- 옷장 패널(측면, 상단, 하단, 후면)
- 도어 패널
- 서랍 구성품
- Shelves and hanging rail
- Metal handles and hinges
- 조립 하드웨어(나사, 다웰, 캠 잠금 장치 등)
- Wall attachment device
4. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | 코로나 |
| 색상 | 하얀색 |
| 재료 | Solid pine wood with honey wax finish, engineered wood, metal |
| 전체 치수(W x D x H) | 102 x 52 x 186cm (40.2인치 x 20.5인치 x 73.2인치) |
| Drawer Quantity | 1 |
| 기원 | 중국 본토 |
| 조립이 필요합니다 | 예 |
Image: Detailed dimensions of the Corona wardrobe.
5. 조립 설명서
Assembly of the Corona wardrobe is required. It is recommended to have two people for assembly. Ensure you have adequate space and all tools (e.g., screwdriver, hammer) before starting.
- 부품 풀기 및 식별: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the package contents list to ensure all parts are present.
- 베이스 조립: Connect the bottom panel to the side panels according to the provided hardware.
- 뒷면 패널 부착: 조립된 프레임에 뒷면 패널을 고정합니다.
- Install Shelves and Hanging Rail: Insert the shelves and hanging rail into their designated positions.
- 문 조립 및 부착: Attach the metal hinges to the door panels and then mount the doors to the wardrobe frame. Ensure doors open and close smoothly.
- Assemble and Insert Drawer: Assemble the drawer components and install the metal handles. Slide the completed drawer into its runners.
- 상단 패널 부착: 상단 패널을 고정하여 주요 구조를 완성하십시오.
- 벽면 부착 장치를 설치하세요: This is a critical safety step. Securely fasten the wardrobe to a wall stud using the provided wall attachment device to prevent tipping. Follow the specific instructions included with the anti-tipping kit.
Image: Assembled Corona wardrobe, front view.
이미지: 내부 view of the Corona wardrobe with doors and drawer open.
6. 운영
The Corona wardrobe is designed for straightforward use:
- 문: Use the metal handles to gently open and close the two main doors. Avoid forcing the doors.
- 서랍: Pull the metal handles to open the bottom drawer. Push firmly to close.
- 저장: Utilize the hanging rail for longer garments and the internal shelf for folded clothes or accessories. The bottom drawer is suitable for smaller items.
Image: Detail of metal handles and hinges.
7. 관리 및 유지 보수
To ensure the longevity and appearance of your Corona wardrobe, follow these care guidelines:
- 청소: 부드러운 d로 표면을 닦으십시오.amp 천을 사용하십시오. 목재 마감재를 손상시킬 수 있는 연마성 세척제나 독한 화학 물질은 사용하지 마십시오.
- 가루 살포: 마른 부드러운 천으로 정기적으로 먼지를 닦아주세요.
- 유출: 얼룩이나 물 피해를 방지하려면 유출된 액체를 즉시 닦아내세요.
- 햇빛: 직사광선에 장시간 노출되면 나무의 색이 바래거나 변색될 수 있으므로 피하십시오.
- 습기: 목재가 휘거나 갈라지는 것을 방지하려면 안정적인 실내 온도와 습도를 유지하세요.
- 하드웨어: Periodically check all screws and fittings to ensure they are tight. Retighten as necessary.
8. 문제 해결
일반적으로 발생할 수 있는 문제에 대한 해결책은 다음과 같습니다.
- 문이 제대로 닫히지 않음: Check if the wardrobe is level. Adjust the feet if necessary. Inspect hinges for looseness and tighten screws.
- 서랍이 뻑뻑하게 열림: Ensure the drawer runners are clean and free of debris. Check if the drawer is overloaded or if items are obstructing its movement.
- Wobbly wardrobe: Verify that all assembly hardware is securely tightened. Confirm the wall attachment device is properly installed and secured to a wall stud.
- Scratches on wood: Minor scratches can sometimes be touched up with a wood repair kit or furniture polish matching the honey wax finish.
9. 보증 및 지원
For any questions, concerns, or to report missing/damaged parts, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.
The manufacturer, vidaXL, typically offers a standard warranty against manufacturing defects. Please refer to their official web구체적인 보증 약관 및 조건은 해당 사이트 또는 구매 문서를 참조하세요.