1. 서론
The ST8100B is a precision oxygen concentration instrument designed for accurate and rapid measurement of oxygen (O₂) gas. It utilizes an electrochemical gas sensor for quick response and features manual alarm level setup with both light and sound indicators. This device is suitable for various environments including homes, workshops, petroleum refining facilities, petrochemical plants, and for oxygen content detection in vehicles and industrial settings where oxygen is used or monitored.
2. 안전 정보
기기를 작동하기 전에 모든 안전 지침을 읽고 이해하십시오. 지침을 따르지 않을 경우 부상이나 기기 손상이 발생할 수 있습니다.
- 장치를 수리하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
- 배터리 설치 및 교체는 명시된 절차에 따라 올바르게 진행하십시오.
- 기기를 극한의 온도, 습도 또는 부식성 환경에 노출시키지 마십시오.
- 장치를 강한 전자기장에서 멀리 두십시오.
- Always operate the device within its specified operating conditions.
- This device is for measurement purposes only and should not be used as a primary safety device in critical life-support systems without additional safety measures.
3. 제품 오버view
The ST8100B is designed for ease of use and portability. Key components and controls are outlined below:
- 감지기: Located at the top, responsible for detecting oxygen concentration.
- 표시하다: Large LCD screen showing measurement results and other indicators.
- 켜기/끄기 버튼: 장치의 전원을 켜거나 끕니다.
- Backlight/▼ key: Controls display backlight and navigates menus downwards.
- 모드 키 : 서로 다른 작동 모드 간 전환.
- Sound/▲ key: Controls audible alarm and navigates menus upwards.
- 단위 키: 측정 단위를 변경합니다.
4. 사양
| 특징 | 사양 |
|---|---|
| 상표 | SMART SENSOR / OEM |
| 모델 번호 | ST8100B |
| 표시하다 | Segment LCD backlight display |
| 가스 종류 | Oxygen meter |
| 측정 범위 | 0~30% 볼륨 |
| 해결 | 0.1% |
| 기본 오류 | ≤±3% F·S |
| 온도 범위 | -20℃~50℃ (accuracy ±2℃) |
| 습도 범위 | 상대습도 1%~99% |
| 응답 시간 | 15초 이내 |
| 복구 시간 | 15초 이내 |
| 측정 원리 | Electrochemical principle, life for 2 years |
| 알람 설정 | Low / High Alarm setting |
| 알람 모드 | Sound and light dual alarm |
| 작동 온도 | -10℃~50℃ (except LEL is 0 ~40℃) |
| 작동 습도 | 0-95%RH (비응축) |
| 보관 온도 | 0~40℃ |
| Product Weight / Size | 138g / 57*28*167mm |
| 구현 표준 | GB12358-2006 |
| 전원 공급 장치 | 3x1.5V AAA battery |
| Battery Working Runtime | About 100 hours of continuous use (when backlight is off) |
| 포장 | 선물 상자 |
| 포장 내용 | 1 * Oxygen Detector, 1 * USB Cable, 1 * Hose, 1 * Carrying Case, 1 * User Manual (English) |
5. 설정
5.1. 배터리 설치
The ST8100B requires three (3) 1.5V AAA batteries for operation. Batteries are not included with the device.
- 장치 뒷면에서 배터리 덮개를 찾으세요.
- Slide the cover open in the direction indicated.
- Insert three 1.5V AAA batteries, ensuring correct polarity (+/-) as marked inside the compartment.
- 배터리 덮개를 단단히 닫으세요.
5.2. 초기 전원 켜기
Press and hold the On/Off button (usually the red power button) until the display illuminates. The device will perform a self-test and then enter the measurement mode.
6. 사용 설명서
6.1. 측정하기
Once powered on, the device will automatically begin measuring oxygen concentration in the surrounding environment. The current oxygen percentage and temperature will be displayed on the HD backlit LCD screen.
6.2. 단위 변경
Press the 'UNIT' key to cycle through available measurement units if applicable (e.g., for temperature display between Celsius and Fahrenheit).
6.3. Setting Alarm Values
The ST8100B allows you to set both low and high alarm thresholds for oxygen concentration.
- Enter the alarm setting mode (refer to the device's on-screen prompts or specific button combinations if available).
- Use the '▲' (Sound) and '▼' (Backlight) keys to adjust the 'LO ALM' (Low Alarm) value.
- Confirm the low alarm setting.
- Use the '▲' and '▼' keys to adjust the 'HI ALM' (High Alarm) value.
- Confirm the high alarm setting to save.
7. 알람
The ST8100B is equipped with a high-decibel buzzer and a visual display alarm. When the detected oxygen concentration falls below the 'LO ALM' value or rises above the 'HI ALM' value, the instrument will activate both audible and visual alarms to alert the user.
8. Effects of Oxygen Concentration on Humans
Understanding the effects of varying oxygen levels is crucial for safety. The table below outlines the symptoms associated with different oxygen concentrations in the atmosphere (at standard atmospheric pressure).
| Oxygen Concentration (%) | Symptoms (Atmospheric Pressure) |
|---|---|
| 100% | Deadly, 6 minutes (Absolutely airtight environment, such as hyperbaric oxygen chamber) |
| 50% | Deadly, can be cured after 45 minutes treatment. (Absolutely airtight environment, such as hyperbaric oxygen chamber) |
| >23.5% | Rich oxygen |
| 20.96% | 정상 |
| 19.5% | 최저한의 |
| 15~19% | Reduce efficiency, and lead to problems of head, lung and circulation system |
| 10~12% | Shortness of breath, loss of judgment, purple lips |
| 8~10% | Governance loss, syncope, unconscious, pale, nausea and vomiting |
| 6~8% | 8 minutes, blood pressure, weak heartbeat, mouth breathing, quickly stopped breathing |
| 4~6% | 40 seconds, convulsions, respiratory arrest, death |
9. 유지관리
- 청소: 부드러운 천으로 장치를 닦으십시오. damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 저장: 장기간 사용하지 않을 경우 배터리를 분리하고 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- 센서 관리: The electrochemical sensor has a life of approximately 2 years. Regular calibration is recommended to ensure accuracy, though this device does not specify user calibration.
- 배터리 교체: Replace batteries promptly when the low battery indicator appears on the display to ensure continuous accurate operation.
10. 문제 해결
If you encounter issues with your ST8100B, please refer to the following common problems and solutions:
- 기기의 전원이 켜지지 않습니다:
- 배터리가 올바른 극성으로 올바르게 설치되었는지 확인하세요.
- 새 AAA 배터리로 교체하세요.
- 부정확한 판독값:
- 센서가 깨끗하고 방해물이 없는지 확인하세요.
- Verify the device is operating within its specified temperature and humidity ranges.
- Allow the device to stabilize in the environment for a few minutes before taking critical readings.
- 알람이 울리지 않거나 깜박이지 않음:
- Check if alarm settings (LO ALM, HI ALM) are configured correctly.
- Ensure the sound is not muted (if a mute function exists).
문제가 지속되는 경우 고객 지원팀에 문의하세요.
11. 사용자 팁
- The device's battery working runtime is approximately 100 hours of continuous use when the backlight is off. To conserve battery life, turn off the backlight when not needed.
- Always ensure the English version of the user manual is available for reference.
- Consider the various applications of the device, such as oxygen generator purity testing, chemical industry monitoring, gallery area safety, oxygen cylinder concentration detection, mountaineering, and agricultural planting, to maximize its utility.
12. 보증 및 지원
12.1. 보증
이 제품에는 다음이 포함되어 있습니다. 1년 보증 from the date of purchase. During the warranty period, if any quality problem arises, please provide photos to demonstrate the issue. The manufacturer will determine whether to send replacement parts or request the instrument for repair or exchange. Please contact customer support before returning any product. You will be responsible for double-run freight costs.
12.2. 지원
For technical assistance, troubleshooting, or warranty claims, please refer to the contact information provided with your purchase or visit the official SMART SENSOR web대지.
13. 회사 정보
SMART SENSOR is a professional manufacturer and seller of instruments with over 10 years of experience in instrument development and production. The company boasts a strong R&D team and collaborates with domestic universities to develop cutting-edge technology. Their products, including smart multimeters, clamp meters, DC power supplies, laser distance meters, infrared thermometers, vibration meters, thickness gauges, sound level meters, anemometers, temperature hygrometers, range finders, gas detectors, metal detectors, voltage insulation meters, earth resistance testers, and leakage current testers, are known for their quality and market share. OEM/ODM services are available for all models.
14. 인증
The ST8100B Oxygen Gas Analyzer complies with relevant international standards and holds the following certifications:
- CE 인증
- FCC 인증
- RoHS 준수
15. 자주 묻는 질문(FAQ)
- Q: Does your company accept customization?
- A: Yes, we offer customizing services for customers, including OEM/ODM. Any logo and color can be customized. An English copy of the manual is also available.
- Q: What is the warranty of the product?
- A: We offer a 12-month warranty. Within the warranty period, if there is any quality problem, please send us photos to show the problem. We will then decide to send you parts or have you send the instrument back for repair or exchange. Please contact us first before sending it back directly. You will only need to pay for double-run freight.
