iGPSPORT BiNavi GPS 자전거 컴퓨터 사용 설명서

1. 제품 오버view

The iGPSPORT BiNavi is a comprehensive bike navigator designed to enhance your cycling experience with intelligent navigation, extensive data metrics, and long battery life. It features a 3.5-inch transflective touchscreen, dual-band GPS, and compatibility with various sensors.

Key features of the iGPSPORT BiNavi include advanced roadbook analysis, intelligent navigation, comprehensive turn prompts, a 3.5-inch transflective touchscreen, 35-hour battery life, scientific training guidance, and a rich cycling ecosystem.

1.1 Computer Buttons

The device features 6 physical buttons for various operations:

The image shows the location of the six buttons on the device.

• 전원 버튼(1): Short press to power on / back / enter status page. Long press to power off. Functions as zoom on map page.
• 선택 버튼(2): Select / Enter ride menu.
• Lap Button (3): 랩/빠른 설정.
• Riding Button (4): 활동을 시작/일시 중지합니다.
• Upward Button (5): 위로 / 왼쪽으로 바꾸세요.
• Downward Button (6): 아래 / 오른쪽으로 전환합니다.

1.2 아이콘 설명

Understanding the icons on your device display:

• GPS 신호: GPS 신호 강도를 나타냅니다.
• 배터리: 현재 배터리 수준을 보여줍니다.
• 블루투스: Bluetooth 연결 상태를 나타냅니다.
• 데이터 전송: Shows data transfer activity.
• 메뉴: 장치 메뉴에 접근합니다.
• 녹음 시작: Initiates activity recording.
• 녹음 중지: Halts activity recording.
• 홈페이지: 메인 화면으로 돌아갑니다.
• 녹음 종료: Finalizes and saves the recorded activity.
• 핵심: Related to CORE body temperature sensor connection.
• 심박수 모니터: Indicates heart rate sensor connection.
• 케이던스 센서: Indicates cadence sensor connection.
• 속도 센서: Indicates speed sensor connection.
• Speed and Cadence Sensor: Indicates combined speed and cadence sensor connection.
• 파워미터: Indicates power meter connection.
• Electronic Shifter: Indicates electronic shifter connection.
• 레이더: Indicates radar connection.
• 훈련자: Indicates smart trainer connection.
• E-bike: Indicates E-bike connection.
• 빛: Indicates bike light connection.

2. 설정

2.1 장치 충전

The device is powered by a built-in lithium-ion battery. Use a compatible USB-C charging cable.

1. USB 포트에서 날씨 캡을 들어 올립니다.
2. USB 충전 케이블을 연결합니다.
3. 장치를 완전히 충전하세요.
4. After charging, unplug the cable and close the weather cap to maintain waterproof and dust-proof performance.

메모:

• Please use a DC5V standard power adapter. Fast charge adapters are not recommended as they may damage the battery.
• When the battery level is low, a low battery icon will be displayed in the upper right corner of the device's home page, prompting you to charge.
• Do not overstretch the USB weather cap.

2.2 Installation of Standard Bike Mount

Use the included rubber bands to attach the standard bike mount to your bike stem.

1. 고무 디스크를 표준 ​​자전거 마운트 뒷면에 놓습니다.
2. Select a suitable place on the bike stem to position the rubber disk and the standard bike mount.
3. Loop the two rubber bands around the bike stem, hook the buckle of the bike mount, and fix it on the bike stem.
4. 장치 뒷면의 탭을 표준 자전거 장착 홈에 맞춥니다.
5. Place the device on the bike mount and rotate it by 90 degrees to secure.

메모:

• It is recommended to use an iGPSPORT Standard Bike Mount or Out-Front Mount to avoid damaging the tab of the bike computer.

The package includes the bike navigator, protective case, tempered film, standard bike mount, USB-C charging cable, tether, and quick start manual.

2.3 Pairing with Smartphone (First Pairing)

Pairing your smartphone allows you to access richer features via the iGPSPORT APP.

1. Open the iGPSPORT APP on your smartphone and log in.
2. Place the bike computer near your smartphone. In the APP, go to the home page or device page, click "Add Device", select "Cycling Products", and the APP will search for BiNavi. Select it and click "Connect".
3. When "Bluetooth Pairing Request" prompts on your device, click "Pair" to accept.
4. After pairing, the bike computer will appear in the device list.
5. Follow the prompts in the iGPSPORT APP to complete device settings and click "Save and Sync" to apply them to the device.

메모:

• Pair the device using the iGPSPORT APP, not directly through your smartphone's Bluetooth settings.
• Ensure your smartphone has an internet connection and Bluetooth is enabled.
• AppStore나 GooglePlay에서 iGPSPORT 앱을 다운로드하세요.
• For Android users, enable location permissions for the iGPSPORT APP in your phone's app settings.

2.4 Removing Pairing

If you wish to pair your bike computer with another smartphone, remove the current pairing first:

1. Go to "System Menu" > "Pair Phone" to view 페어링된 장치 목록.
2. Select "Unpair Phone" and confirm.
3. The bike computer will restart automatically, and the Bluetooth Disconnected icon will be displayed.

2.5 센서 페어링

The BiNavi supports ANT+ and Bluetooth sensors, including heart rate monitors, cadence sensors, speed sensors, power meters, smart trainers, shifters, radars, lights, and E-bikes.

1. Ensure sensors are properly installed and awake (e.g., rotate crank arms for cadence/power, rotate wheel for speed).
2. On the BiNavi, select "Add Sensor" to enter the sensor list. You can search all sensors or filter by type.
3. The bike computer will search for available sensors.
4. When a sensor is found, its model and ID will be displayed. Select the sensor to connect.
5. Select "Connect" to pair sensors in batches.
6. After successful pairing, a "Successful Connection" pop-up will appear, and the sensor will be added to the sensor list.

메모:

• Sensors will automatically connect to the device if successfully paired and awake.
• Sensors need to be searched and reconnected after battery replacement.
• Resetting the device or firmware upgrades may require re-searching and reconnecting sensors.
• For BLE/ANT+ dual-mode sensors, ANT+ protocol is recommended for connection.

3. 운영

3.1 Pre-Riding Preparations

For accurate riding data, ensure your bike computer is outdoors in an open space to receive satellite signals before starting your ride. Keep the screen facing up and wait for signal acquisition.

If sensors were previously connected, they will automatically reconnect once awake. The device will automatically measure heart rate, cadence, power, and other data using your sensors during the ride.

3.2 터치스크린 사용하기

The 3.5-inch HD touchscreen provides clear, easy-to-read data and efficient navigation.

1. 위성 신호를 수신한 후 홈페이지에서 주행 모드를 선택하여 주행 데이터 페이지로 들어가세요.
2. Slide left and right to switch between riding data pages.
3. Pull down from the top to evoke the status page.
4. 라이딩 데이터 페이지를 길게 눌러 페이지 및 필드 편집 모드로 들어갑니다.
5. Tap anywhere on the screen in the riding data page to wake up the riding status bar, check sensor status, or perform quick operations.
6. Select the home icon to return to the homepage.
7. Select the play icon to enter the riding page.
8. Select the record icon to start recording.
9. During riding, select the pause icon to stop recording.
10. During riding recording, select the stop icon to end riding and save records.

3.3 Using Buttons

1. After receiving satellite signals, press the play/pause button to enter the riding data page.
2. Use the Upward/Downward buttons to switch riding data pages.
3. Press the home button to return to the home page.
4. During riding recording, press the select button to evoke the status page.
5. Press the play/pause button to record riding.
6. During riding recording, press the pause button to stop recording.
7. During riding recording, press the lap button to record a new lap.
8. Press the menu button to enter the riding page, select "save" to end riding and save the recording.

3.4 While-Riding

스캔 데이터 View

During training, you can switch the riding view by sliding left or right. The displayable data and information depend on the selected ride mode and your customizations. You can set up specific pages for different ride modes on the device and in the iGPSPORT APP, and create custom data fields.

라이딩 메뉴

During a ride, select the menu button to open the menu and access functions like route navigation, workouts, page and field configuration.

무릎

Pressing the lap button manually records a lap. You can enable Auto Lap in Ride Mode Settings (System Menu > Ride Mode > Auto > Auto Lap) and set it by distance, position, or time.

3.5 Post-Riding

활동 요약

After finishing an activity, you can view details on the device. More detailed data and graph analysis are available in the iGPSPORT APP or its official website. On the home page, select "History" to view recent activities and historical summaries.

View iGPSPORT APP의 라이딩 데이터

If your smartphone is within Bluetooth range, the device will automatically connect and sync with the iGPSPORT APP (if auto-sync is enabled). The APP allows quick viewing of analyzed data, detailed ride data, and sharing with friends.

3.6 Ride Mode

The device offers six default ride modes, and you can create and customize new modes. Each mode can have specific settings, including custom data page templates and data fields.

The Ride Mode menu allows selection of different cycling profiles.

Enabling Modes

Select "Enable" on the Ride Mode Settings page and flip the switch to activate a mode.

페이지 설정

Select "Pages" to manage data pages. The system has 5 built-in data pages and specific pages like maps and elevation tables.

• Select a page to enter its setting menu.
• Select "Enable" to show/hide the page.
• Select "Page Fields" to edit page templates and data fields.
• 페이지 설정에서는 사용자 정의 페이지 정렬을 지원합니다.

알림 설정

Select "Alerts" to configure alerts. Enable an alert and set its threshold value.

자동 기능

Select "Auto Functions" to view and toggle various automatic features on/off.

아이클라임

Select "iClimb" to enable/disable this function. To use it, send a roadbook with elevation data from the iGPSPORT APP. The iClimb page will automatically pop up when navigating a route with a grade over 3% and a slope over 500m.

iClimb 3.0 provides a visual display of climb classifications and elevation curves to help manage effort.

Add/Delete Modes

Select "Add" to create new modes from templates. Select "Delete" to remove user-added ride modes.

3.7 탐색

Plan routes in the iGPSPORT APP and send them to the device. GPX or TCX files can be imported. Previous rides can also be used as navigation guides. Select "Navigation" on the home page to access the navigation menu.

The device offers lightning-fast roadbook analysis, processing routes in seconds.

Navigate by Saved Activities

Select "Activities" and choose an activity to start navigation.

Navigate by a Route

1. Send a route from the iGPSPORT APP to the device.
2. Select "Route Navigation" to view 이용 가능한 경로.
3. 경로를 선택하여 완료를 확인하세요view 그리고 엘리베이션 프로file.
4. Select "Navigate" to start.

Navigate by Locations

1. Select "Saved Locations" to view 기울기.
2. 사전 위치를 선택하세요view 지도에 있습니다.
3. Select "Navigate" to plan a route from your current location to the selected location.

탐색 설정

• 경로 변경: Turn on/off rerouting. When enabled, the device automatically re-plans the optimal route if you go off-track.
• Navigation Screen Flash: Turn on/off screen flash when approaching a turn.
• Elevation Graph: Turn on/off elevation data display.
• Navigation Cue: Set the page where turn prompts pop up (all pages, pages 1-5, or off).

The device provides multi-dimensional turn prompts and all-terrain sensing for safer navigation.

지도 설정

Customize the navigation map with settings for north up, auto zoom, road names, locations, POI, DEM, and classic or colorful map themes.

탐색 작업

• 라이드 모드로 들어가서 지도 페이지로 전환하세요.
• Use zoom buttons to zoom in or out.
• Use the north up button to switch to north up view.
• Select the map touch mode button to drag the map, zoom with two fingers, and long press to mark locations.
• Press the menu button to stop the route, return to the starting point, or navigate to a location.

Equipped with five major satellite systems and dual-frequency L1 & L5 technology for precise ride tracking.

3.8 훈련

Create training plans and workouts in the iGPSPORT APP or interval training courses on the device.

Smart Training provides scientific analysis and customizable plans for easy improvement.

Following a Workout Course

1. Send a workout from the iGPSPORT APP.
2. 운동을 선택하세요 view 단계.
3. Select "Start Training" to enter ride mode; the training page will display.
4. Select the play button to start training and the activity timer.
5. Select the next step button on the training page to stop the current step and enter the next.
6. Select the menu button on the training page, then "Stop Training" to end the workout.
7. The workout stops after the activity is saved or discarded.

Following a Training Plan

1. Send a training plan from the iGPSPORT APP.
2. 달력을 선택하세요 view daily training plans and workouts.
3. Select "Start Training" to enter ride mode; the training page will display.
4. Operations after entering ride mode are similar to workouts.

Using Interval Training

1. Select "Interval Training" to enter settings.
2. Set "Ride" for training time and type.
3. Set "Rest" for rest time and type.
4. Set "Repeat" for the number of training cycles.
5. Enable "Warm Up" or "Cool Down" for pre-training warm-up and post-training cool-down.

Using Smart Trainer

1. Select "Smart Trainer" to view 옵션.
2. If not connected, select "Pair Smart Trainer" to connect.
3. Select "Resistance Mode" to set resistance level.
4. Select "Power Mode" to set target power.
5. Select "Grade Mode" to set grade.
6. Select "Follow An Activity" to adjust resistance based on route elevation.
7. Select the play/pause button to start or stop Trainer training.

3.9 Cycling Ability

The bike computer evaluates physical performance metrics and supports calculations for training effect, training load, real-time stamina, VO2max, recovery time, and more.

메모:

• Enter accurate user information (gender, age, weight, height) for precise measurements.
• A heart rate monitor is required for training.

Fitness Level

Select "Fitness Level" to view indicators like fitness level, VO2 max, FTP, and MAP. Wear a heart rate sensor and ride for at least 20 minutes at moderate to high intensity to obtain fitness level data.

훈련 상태

Select "Training Status" to view training status, load trends, and last 7 days training load. Wear a heart rate sensor and ride for at least 20 minutes per day for 7 days or more to obtain this data.

복구 상태

Select "Recovery Status" to view 복구 상태 및 완전한 복구 시간.

FTP (Functional Threshold Power)

홈페이지에서 시스템 메뉴 > 사이클링 기능 > FTP를 선택하세요. view FTP, enable auto-detection, and perform measurement.

Lactate Threshold Heart Rate

홈페이지에서 시스템 메뉴 > 사이클링 능력 > 젖산 역치 심박수를 선택하세요. view 자동 감지 기능을 활성화하세요.

Personal Heart Rate Zone

홈페이지에서 시스템 메뉴 > 사이클링 능력 > 개인 심박수 구역을 선택하세요. view and set your personal heart rate zone based on your training target.

사용자 정보

홈페이지에서 시스템 메뉴 > 사이클링 능력 > 사용자 정보를 선택하여 개인의 생리적 매개변수를 설정하세요.

3.10 세그먼트

The Segment function allows you to challenge yourself by timing specific sections or areas, improving performance, and comparing it to historical data.

Sending Segments

Send segments from the iGPSPORT APP to the bike computer. After connecting, select "My Segments" on the "My" page in the APP to send them.

Segments Preview

1. Select "Segment" on the home page to view 옵션.
2. 미리 세그먼트를 선택하세요view 그 정보.
3. Select "Navigate to Start" to quickly enter ride mode and plan a route to the segment's start.

Segment Settings

Turn on/off segment detection, select challenge targets (e.g., KOM), and synchronize segment information to the APP.

Using Segment

If segment detection is on, the segment page will activate when you pass the route during recording, and "Segment Completed" will display after finishing.

3.11 음악 제어

To control music, install the iGPSPORT APP on your phone and keep it connected to the bike computer. Once music is playing on your phone, you can control it from the bike computer.

The device offers music control and other smart features as a riding assistant.

1. 원하는 주행 모드를 선택하고 주행 데이터 페이지로 이동하세요. 왼쪽이나 오른쪽으로 스와이프하여 음악 제어 페이지로 전환하세요.
2. View currently playing song information.
3. Control playback/pause, previous/next song, and volume.

메모:

• Supports iOS and Android systems (Harmony OS not supported).
• For Android phones, enable "Smart Notification" > "Access Notification" in the iGPSPORT APP or grant permission in phone settings.

3.12 역사

History stores past rides, allowing you to view activity data like time, distance, calories, and external sensor information.

메모:

• Older records will be overwritten if memory runs out.

All Activities

1. Select "All Activities" to view 역사.
2. Select an activity for summary information.
3. Select "Summary" for detailed views (summary, lap, graph, climbs, segments, training status).
4. Select "Delete" to remove an activity.

Personal Record

Personal Records track your best achievements (furthest ride, fastest average speed, highest climb, longest time, best power).

1. Select "Personal Record" on the home page.
2. Select a record to view 데이터입니다.
3. 선택하다 "View" to see corresponding history activities.
4. Select "Reset" to delete the current record and unrank existing data.

3.13 날씨

To use this function, install the iGPSPORT APP, pair it with the bike computer, and enable location services (iOS) or location settings (Android). The bike computer will display synchronized weather information (temperature, rainfall rate, wind speed and direction).

1. Select "Weather" on the home page or status page to view details and update.
2. Successful updates will display weather, temperature, rainfall rate, wind speed, and direction.

3.14 Smart Notification

Install the iGPSPORT APP and pair it with the bike computer to receive incoming calls, messages, and APP notifications.

메모:

• Smart Notification increases battery consumption for both the bike computer and phone due to constant Bluetooth connection.

3.15 상태 페이지

Pull down from the top of the home page or riding page, or select the status icon, to wake up the status page. It displays GPS, battery, sensor/smartphone connection status, sunrise/sunset time, current elevation, and more. The status page also provides shortcuts to GPS settings, elevation calibration, brightness, sensor settings, weather, and smart notifications.

3.16 Smart Light Connection

Connect the bike computer to a compatible bike light to control front and taillight modes, smart functions, and view battery levels and endurance time.

스마트 조명 감지

If the bike light lacks a light sensor, the bike computer's light sensor can automatically control the bike light's on/off function and adjust brightness based on ambient light.

조명 알림

When enabled, the front light syncs with navigation and cycling data for safety alerts:

• Navigation Cue: If navigation cues are enabled, the front light will flash when turning to increase visibility.
• Heart Rate Warning: In ride mode, if Alert Settings (currently heart rate only) are enabled, the front light will flash when heart rate exceeds the set range.

4. 유지관리

4.1 펌웨어 업데이트

To ensure optimal performance, update the device firmware regularly. The device automatically checks for updates when connected via Bluetooth. You can manually check by going to iGPSPORT APP > "Device" > "Firmware Update". Updates may take up to 20 minutes depending on Bluetooth signal strength.

4.2 Calibrate Settings

Select System > Calibrate Setting to access elevation and compass calibration menus.

4.3 장치 재설정

• 재설정 : Restores default values and ride mode, but retains history.
• Delete and Reset: Restores default values and ride mode, and deletes history.

메모:

• Delete and reset will restore default values, unpair Bluetooth, clear all data and odometer. It is recommended to turn on auto-sync in the iGPSPORT APP (Device > Auto Sync) to save personal data before performing this.

4.4 Device Restarting

If you encounter problems, try restarting the device. Restarting will not delete settings or personal data. Long press the power button to turn off, then press it again to restart.

4.5 Common Wheel Size Settings

Setting the correct wheel size is crucial for accurate riding information. There are two methods:

Method 1: Manual Measurement

1. Mark the air valve where the wheel touches the ground. Draw a line on the ground.
2. Move the bicycle forward one full rotation on a flat surface, keeping tires perpendicular to the ground. Draw another line at the air valve.
3. Measure the distance between the two lines.
4. Subtract 4mm to account for the weight on the bicycle to get the circumference.

Method 2: Using the Chart

Find your wheel's diameter (in inches or ETRTO) printed on the wheel and match it to the corresponding length in millimeters in the table below. For sizes not listed, you can find them online.

5. 문제 해결

• 장치가 응답하지 않음: Try restarting the device by long-pressing the power button to turn it off, then pressing it again to restart. This will not delete settings or personal data.
• Pairing issues with smartphone: If pairing fails, try restarting your smartphone's Bluetooth, the iGPSPORT APP, or the bike computer itself. Ensure your phone has an internet connection and Bluetooth is enabled.
• Sensor connection issues: If a sensor stops connecting, it may need to be searched and reconnected after replacing its battery. Resetting the device or firmware upgrades may also require re-searching and reconnecting sensors.
• 부정확한 데이터: Ensure your user information (gender, age, weight, height) is accurately entered in the iGPSPORT APP, as these factors affect measurement accuracy. For fitness and training status, ensure a heart rate monitor is worn and sufficient riding data is collected as specified in the manual.
• 배터리가 빠르게 소모됨: Be aware that enabling Smart Notification will increase battery consumption for both the bike computer and your phone due to constant Bluetooth connection.

6. 사양

Detailed specifications of the iGPSPORT BiNavi bike computer.

7. 사용자 팁

• 요금 청구 모범 사례: Always use a standard DC5V power adapter for charging. Avoid fast chargers to prevent potential battery damage.
• USB 포트 관리: Ensure the USB weather cap is properly closed after charging to maintain the device's waterproof and dust-proof integrity. Do not overstretch it.
• 장착 권장사항: For optimal stability and to prevent damage to the bike computer's tab, use an iGPSPORT Standard Bike Mount or Out-Front Mount.
• 언어 설정: The device supports multiple languages. You can change the display language in the System Menu > Language settings to suit your preference.
• Accurate Fitness Data: To get precise fitness level and training status data, ensure you wear a heart rate sensor. For fitness level, ride for at least 20 minutes at moderate to high intensity. For training status, ride for at least 20 minutes per day for 7 days or more.
• Battery Management with Smart Notifications: Be aware that enabling Smart Notifications will increase battery consumption on both your bike computer and connected smartphone due to continuous Bluetooth activity. Manage this setting based on your ride length and battery needs.
• Post-Ride Battery Saver: After each ride, consider closing Battery Saver Mode and charging the device to ensure it's ready for your next adventure with full performance.

8. 연락처 정보

For further assistance or inquiries, please use the following contact details:

• 공식적인 Web대지: www.igpsport.com
• 제조업체: 무한 Qiwu 기술 Co., Ltd.
• 주소: 3rd Floor, Building 04, Creative World Zone D, No.16 West Yezhihu Road, Hongshan District, Wuhan City, Hubei Province, China
• 핸드폰: 027-87835568
• 이메일: service@igpsport.com

부인 성명:

This user manual is for reference only. If there is any difference between the device and the manual, please refer to the device. We will not notify otherwise.