CONENTOOL MIG-200 4-in-1 용접기 사용자 설명서

1. 서론

The CONENTOOL MIG-200 is a versatile 4-in-1 digital portable welding machine designed for a wide range of welding applications. It integrates Synergy Gas MIG, Gasless MIG, ARC (MMA), and Lift TIG welding functions into a single compact unit. Featuring an IGBT DC Inverter for stable performance and a One-Knob Intelligent Control System for simplified operation, this machine is suitable for both professional and DIY use across various metals.

CONENTOOL MIG-200 Welder with accessories and welding modes — Figure 1: CONENTOOL MIG-200 Welding Machine with its various welding modes (MMA, MIG Gasless, MIG Gas, LIFT-TIG) and included accessories.

2. 안전 정보

용접 장비를 작동할 때는 항상 안전을 최우선으로 고려해야 합니다. 사용 전에 모든 안전 경고 및 지침을 읽고 숙지하십시오.

전기 안전: Ensure the power supply is 220V 50/60HZ and properly grounded. Avoid operating in wet conditions.
과전류, 과전압tage, Over-heating Protection: The machine is equipped with automatic shutdown features to prevent damage from these conditions. If the machine shuts down, allow it to cool before resuming operation.
눈과 피부 보호: Always wear a welding mask (included) with appropriate shade, protective gloves, and flame-resistant clothing to shield against arc rays, sparks, and hot metal.
통풍: Ensure adequate ventilation to disperse welding fumes, which can be hazardous.
화재 예방: 용접 작업장 근처에 가연성 물질을 두지 마십시오. 소화기를 항상 준비해 두십시오.
보호 등급: The machine has an IP21S protection rating, indicating protection against solid objects over 12mm and vertically falling water drops.
정전기 보호: Features a unique coating to prevent shock transfer.

Diagram illustrating safety features like overheating, overload, water rating IP21S, and electrostatic protection. — 그림 2: 이상view of the welding machine's advanced safety features.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

1 x CONENTOOL MIG-200 Welding Machine
1 x 1.35m Electrode Holder
1 x 1.35m Earth Clamp
1 x Hammer Brush
1 x Welding Mask
1 x 0.25kg 0.8mm Flux-cored Welding Wire
MIG 토치 1개
2 x 2.0/2.5mm Welding Rods
1 x 사용자 설명서

Image showing all included accessories: welding machine, mask, ground clamp, welding brush, electrode holder, MIG welding gun, flux cored wire, and welding rods. — Figure 3: All accessories included with the CONENTOOL MIG-200.

4. 제품 오버view

Familiarize yourself with the main components of your welding machine.

4.1 전면 패널

상세한 view of the front panel showing the digital display for voltage and current, control knobs, heat dissipation vents, and positive/negative output terminals. — 그림 4: 전면 패널 레이아웃

디지털 패널: 표시량tag전자 및 현재 설정.
컨트롤 노브: For adjusting voltage, current, and selecting welding modes (MIG, MMA, TIG).
열 방출 통풍구: Essential for cooling the internal components.
Positive/Negative Output: 용접 케이블 연결 지점.

4.2 Internal Wire Feeder

내부 view of the welding machine showing the wire feeder mechanism and a spool of 0.8mm flux cored wire. — Figure 5: Internal Wire Feeder

The machine features an internal wire feeder designed for optimal performance with 0.8mm flux cored wire, and compatible with 0.8-1.0mm welding wire.

4.3 냉각 시스템

옆 view of the welding machine highlighting the advanced cooling system with a large industrial radiator and heavy-duty cooling fan. — 그림 6: 고급 냉각 시스템

An advanced cooling system with a large industrial radiator and heavy-duty dual-ball bearing fan ensures better performance, durability, and extended service life by maximizing airflow and reducing dust infiltration.

5. 설정

5.1 전원 연결

Ensure the welding machine is switched off.
Connect the power cord to a 220V 50/60HZ power outlet. Ensure the outlet is properly grounded.

5.2 용접 부속품 연결

지구 Clamp: 접지선을 연결하세요amp cable to the appropriate terminal on the front panel (usually negative for MIG/MMA). Secure the clamp to the workpiece or welding table to ensure a good electrical connection.
Electrode Holder (for MMA/ARC): Connect the electrode holder cable to the positive terminal for MMA welding. Insert the welding electrode into the holder.
MIG Torch (for MIG Gas/Gasless): Connect the MIG torch cable to the designated MIG connection point.
TIG Torch (for Lift TIG): Connect the TIG torch to the appropriate terminal.

5.3 Loading Welding Wire (MIG Modes)

전선 공급함 덮개를 여세요.
Place the spool of welding wire (e.g., 0.8mm flux-cored wire) onto the spindle.
Thread the wire through the guide tube and feed rollers, ensuring it is seated correctly.
전선 공급부 덮개를 닫으십시오.
For MIG Gas welding, connect the gas cylinder and regulator to the machine's gas inlet.

6. 사용 설명서

The CONENTOOL MIG-200 offers four welding modes: MIG with gas, MIG without gas (Flux-cored), MMA (ARC), and Lift TIG. The One-Knob Intelligent Control System simplifies operation.

Image showing automatic wire feeding, simple operation with control knobs, and the ability to use mixed gas. — Figure 7: Simplified Operation and Wire Feeding

6.1 용접 모드 선택

용접기를 켭니다.
Use the mode selection knob on the front panel to choose between MIG (Gas), MIG (Gasless), MMA, or Lift TIG.

6.2 Synergy One-Knob Intelligent Control (MIG Modes)

In MIG modes, the One-Knob Intelligent Control System automatically adjusts welding current and wire feed speed based on your selection, ensuring optimal parameters for a flawless weld.
Fine-tune the current adjustment knob to manage variable feed control for different material thicknesses (thin steel, stainless steel, thicker materials).

6.3 용접 변수

The digital display will show the selected voltage and current. Adjust as needed for your specific welding task. The machine offers a current adjustment range of 30-200A for MIG and 20-200A for MMA/TIG.

The CONENTOOL MIG-200 is capable of welding a wide range of metals, including:

철
스테인리스 스틸
아연 도금 강판
탄소강
구리
Raw steel, White steel, Sheet metal, Square pipe, Metal cage (as shown in product images)

Image displaying various metal forms that can be welded: raw steel, white steel, staircase, sheet metal, square pipe, and metal cage. — Figure 8: Wide Range of Weldable Metals

7. 유지관리

정기적인 유지관리는 용접기의 수명과 최적의 성능을 보장합니다.

청소: Periodically clean the exterior of the machine. The built-in cooling fan system helps reduce dust infiltration, but occasional cleaning of vents is recommended.
케이블 검사: Regularly inspect all welding cables, connections, and the MIG torch for wear, damage, or loose connections. Replace damaged components immediately.
와이어 피더: Keep the wire feeder mechanism clean and free of debris to ensure smooth wire feeding.
저장: Store the welding machine in a dry, clean environment away from direct sunlight and extreme temperatures.

8. 문제 해결

문제가 발생할 경우 다음의 일반적인 문제 해결 팁을 참조하십시오.

Machine Shuts Down: The machine has built-in over-current, over-voltage, and over-heating protection. If it shuts down, allow it to cool down for several minutes before attempting to restart. Check for proper ventilation.
Poor Arc Start/Stability:
- Ensure proper grounding of the workpiece.
- Check welding parameters (current, voltage) are appropriate for the material and welding mode.
- Inspect welding wire/electrode for proper size and condition.
- Clean the contact tip of the MIG torch.
No Wire Feed (MIG):
- Check if the wire spool is correctly installed and not tangled.
- Ensure the wire feed rollers are clean and tensioned correctly.
- Verify the MIG torch trigger is functioning.

문제가 지속되는 경우 고객 지원팀에 문의하세요.

9. 사양

특징	사양
모델 번호	미그-200
브랜드 이름	Conentool
기원	중국 본토
전원 공급 장치	1 ~ 220V 50/60 헤르쯔
정격 전력 용량	4.6킬로와트
최대 개방 회로 Voltage Output (U0)	58V
MIG Output (I2(A)/U2(V) @ Duty Cycle)	200A/24V @ 35%, 153A/24V @ 60%, 118A/24V @ 100%
MMA Output (I2(A)/U2(V) @ Duty Cycle)	170A/26.8V @ 35%, 129A/26.8V @ 60%, 100A/26.8V @ 100%
MIG Current Range	30-200A
MMA Current Range	20-200A
TIG Current Range	20-200A
용접 와이어 직경	0.8-1.0MM
Feeding Speed Adjustment Range	2-15m/분
능률	85%
절연 등급	H
보호 등급	IP21S
Applicable Electrode Size	1.6~3.2mm
Weldable Diameter	0.1-5mm
치수(길이 x 너비 x 높이)	37 x 16 x 19.2cm
무게	8kg
인증	CE, 전자제품안전기준

Image showing the welding machine with a detailed specification table (IEC 60974-1) for MIG and MMA modes, including duty cycle, current, and voltag전자 값. — Figure 9: Technical Specifications and Weldable Materials

10. 사용자 팁

간단하게 시작하세요: If new to welding, begin with simpler projects and practice on scrap metal to get a feel for the machine and different welding modes.
재료 준비: 최상의 용접 품질을 얻으려면 항상 작업물이 깨끗하고 녹, 페인트 또는 기름이 없도록 하십시오.
와이어 선택: While 0.8mm flux-cored wire is recommended, experiment with different wire types and diameters (within the 0.8-1.0mm range) to find what works best for your specific application and material.
Gas for MIG: For cleaner welds and reduced spatter, use shielding gas when operating in MIG Gas mode. Mixed gas can also be used.
Listen to the Machine: Pay attention to the sound of the arc. A consistent, steady sizzle usually indicates a good weld.

11. 보증 및 지원

보증 정보, 기술 지원 또는 서비스 문의 사항은 소매업체 또는 제조업체 공식 연락처 정보를 참조하십시오. web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.

	Azzuno MIG-200F 사용 설명서: 다중 공정 용접기 가이드 Azzuno MIG-200F 다중 공정 용접기의 종합 사용 설명서입니다. MIG, 스틱, 리프트 TIG 용접의 설정, 작동, 안전, 문제 해결 및 용접 매개변수에 대해 알아보세요.
	ANDELI MIG-135 PLUS 3-in-1 Welder Operator's Manual User manual for the ANDELI MIG-135 PLUS 3-in-1 welding machine. Covers MIG/MAG, Flux-Cored (FCAW), Stick (SMAW), and Lift Arc TIG (GTAW) welding. Includes setup, operation, safety, and troubleshooting for this semi-automatic inverter welder.
	VEVOR MIG 용접기 사용 설명서 및 기술 사양 VEVOR MIG 용접기 모델 MIG-200, MIG-200AU, MIG-250에 대한 포괄적인 가이드로, 안전, 작동, 기술 데이터, 문제 해결 등을 다룹니다.
	GZ GUOZHI MIG-200P: 7-in-1 다기능 용접기 사용 설명서 본 사용 설명서는 다용도 7-in-1 용접기인 GZ GUOZHI MIG-200P의 사용 방법을 안내합니다. 가스 MIG, 플럭스 코어 MIG, 리프트 TIG, MMA, 스틱 용접, 스폿 용접 및 스풀 건 기능을 포함한 다양한 용접 방식에 대한 안전, 사양, 설치 및 작동법을 설명하며, 듀얼 볼륨 조절 기능도 제공합니다.tag다양한 금속 가공 용도에 적합한 e(110V/220V).
	RUBIK MIG-140 용접기 작동 설명서 RUBIK MIG-140 용접기의 포괄적인 작동 설명서로, MMA, MIG(가스리스), 리프트 TIG 용접에 대한 일반적인 설명, 안전 지침, 작동, 문제 해결 및 유지 관리에 대한 내용을 담고 있습니다.
	HITBOX HBM1200 Inverter Welder Operation Manual Comprehensive operation instructions for the HITBOX HBM1200 3-in-1 inverter welder. Learn about safety, installation, operation, maintenance, and troubleshooting for MIG, MMA, and gas-free welding.