FOSSiBOT FAC580 580W 교류 발전기 충전기 사용 설명서

1. 서론

The FOSSiBOT FAC580 is a high-efficiency alternator charger designed to power your FOSSiBOT power station or compatible third-party power stations directly from your vehicle's alternator. Delivering up to 580W of power, it charges significantly faster than traditional in-vehicle cigarette chargers, ensuring your devices are ready for use during your journeys. This manual provides essential information for safe installation, operation, and maintenance of your FAC580 charger.

2. 안전 정보

Please read all safety instructions carefully before using the FOSSiBOT FAC580 Alternator Charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the charger is installed in a well-ventilated area to prevent overheating.
• 충전기를 물, 비 또는 과도한 습기에 노출시키지 마십시오.
• Keep the charger away from flammable materials and explosive gases.
• Always ensure the vehicle's engine is off and the FAC580 switch is in the off position before connecting or disconnecting cables to the car battery.
• 제공된 케이블과 액세서리만 사용하세요.
• Do not attempt to disassemble or modify the charger. Contact customer support if service is required.
• The FAC580 features multi-layer protection including short-circuit, over-current, over-heat, and over-voltage protection to safeguard your car battery, charger, and power station.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x FOSSiBOT FAC580 Alternator Charger
• 1 x Input Cable (5M)
• 1 x Output Cable (0.5M)
• 4 x 나사
• 1 x 드라이버
• 1 x 사용자 설명서

4. 제품 오버view

The FOSSiBOT FAC580 is designed for ease of use and efficient charging. Familiarize yourself with its components:

1. Wire terminal to MC4: Connects to your power station.
2. 전원 표시 등 : Displays the product's operational status.
3. 팬 : Provides active cooling for product heat dissipation.
4. 스위치 버튼: Controls power on/off and selects charging modes.
5. Wire crimping terminal to O-ring terminal: Connects to the car battery.

The FAC580 is available in two colors: Classic Black and Vibrant Green.

5. 설치 가이드

Follow these steps to properly install your FOSSiBOT FAC580 Alternator Charger in your vehicle:

1. 1단계: 케이블 연결
   Fix the input and output lines to the FAC580 with the provided screws. Before final installation, check that the product functions properly. Connect the output and input cables of the FAC580 correctly.
2. Step 2: Track
   Route the input cable from the vehicle's interior to the car battery compartment. Ensure the cable is securely routed and not exposed to moving parts or sharp edges.
3. Step 3: Wire to Battery
   Ensure the FAC580 switch is in the off position. Connect the input cable to the car battery: the red wire connects to the Battery positive (+) terminal, and the black wire connects to the Battery negative (-) terminal.
4. Step 4: Fixed
   Securely fix the FAC580 onto a suitable surface within your car, such as the car wall or trunk, using the provided screws. Ensure it is stable and won't move during driving.

5. Step 5: Connect Power Station
   Connect your power station to the FAC580 using the XT90-MC4 cable.
6. Step 6: Select Mode & Start Charging
   Switch the FAC580 to the desired mode to begin charging.

6. 사용 설명서

The FAC580 features a two-stage power switch to adjust output power based on input voltage, ensuring efficient and safe charging. The charger automatically stops charging if the input voltage가 범위를 벗어났습니다.

6.1. 충전 모드

• Mode 1 (Recommended for Driving): Activate this mode during journeys for fast car charging.
  • 입력 Voltage >14V: Auto boost to 580W (Fast Charging)
  • 입력 Voltage 13.2V-14V: 300W Max Output

  

• Mode 2 (Emergency Use Only): Use this mode when you need urgent power with the engine off. The FAC580 instantly powers your power station and protects your car's battery while charging.
  • 입력 Voltage >14V: Auto boost to 580W (Fast Charging)
  • 입력 Voltage 13.2V-14V: 300W Max Output

  

6.2. Automatic Cut-off

• 입력 Voltage <13.2V: The charger automatically cuts off to prevent draining your car battery.

7. 사양

Detailed technical specifications for the FOSSiBOT FAC580 Alternator Charger:

8. 문제 해결

If you encounter issues with your FOSSiBOT FAC580, refer to the following common problems and solutions:

• Charger not turning on or charging:
  
  • Check all cable connections to ensure they are secure and correctly wired to the car battery and power station.
  • Verify the car battery voltag이자형. 입력 볼륨tage is below 13.2V, the charger will automatically cut off to protect the car battery. Start the vehicle's engine to increase alternator output.
  • Ensure the FAC580 switch is in the correct operating mode (Mode 1 or Mode 2).
• 느린 충전 속도:
  
  • Ensure the vehicle's engine is running and the alternator is providing sufficient power. Mode 1 (driving mode) is designed for optimal charging during journeys.
  • 입력 볼륨을 확인하세요tage. If it's between 13.2V-14V, the output will be limited to 300W. For 580W fast charging, the input voltage needs to be >14V.
• 충전기가 뜨겁습니다:
  
  • The FAC580 has a professional cooling system with fans. Ensure the vents are not blocked and there is adequate airflow around the unit.
  • The charger has over-heat protection and will reduce output or shut down if it gets too hot. Allow it to cool down.

9. 사용자 팁

• 케이블 포함 여부: The FAC580 package includes all necessary cables (5M input cable, 0.5M output cable) for installation in your vehicle, along with screws and a screwdriver.
• 최적의 배치: For best performance and cooling, install the FAC580 in a location with good air circulation, such as the trunk or a dedicated compartment, away from direct sunlight or heat sources.
• Engine-Off Charging: When using Mode 2 for emergency engine-off charging, monitor your car battery's voltage to ensure it doesn't drop too low, although the charger has built-in protection.

10. 보증 및 지원

The FOSSiBOT FAC580 Alternator Charger comes with a 1-year warranty. For technical support, warranty claims, or any questions regarding your product, please contact your retailer or FOSSiBOT customer service. Please have your purchase receipt and product model number ready when contacting support.