1. 서론
This manual provides instructions for the Mini BFT Mitto Series 433.92Mhz Garage Door Remote Control. This wireless handheld rolling code transmitter offers stable and reliable control for various automation systems, including garage doors, gates, and other access control systems. Its compact design and wall-mounted installation options provide convenient control for residential, commercial, and industrial applications.
Figure 1: BFT 433MHz remote controls (2-button and 4-button models). Key features highlighted: Security 2.0, Remote Dominance, Control One Garage Door, Lightweight.
2. 핵심 기능
- 433MHz Strong Signal: Ensures stable penetration through walls and obstacles for reliable operation.
- 12V DC Powered: Low power consumption design for long-lasting and dependable performance.
- 벽걸이형 디자인: Offers flexible installation options for convenience.
- 다중 장치 호환성: Compatible with a variety of receiving systems.
- 견고한 구조: Built with durable materials for extended lifespan.
- 쉬운 페어링: Simple and quick process to pair with compatible devices.
3. 호환성
The BFT Mitto Series remote control is compatible with the following BFT brand garage door and roller blind door remote control models:
- Mitto 2 / Mitto 4
- Mitto B RCB 02 / Mitto B RCB 04
- Kleio B RCA 02 / Kleio B RCA 04
- TRC1 / TRC2 / TRC4
- Mitto2M / Mitto4M
Figure 2: Compatibility diagram showing the BFT remote control with various compatible BFT remote models.
4. 설정 및 프로그래밍
Follow these instructions carefully to program your new remote control with your receiver system. There are two common programming types:
Figure 3: Programming instructions for Type 1 (physical buttons) and Type 2 (digital display) receivers.
Type 1 Programming (Physical Buttons)
- C를 엽니다.asin수신기의 g 단자입니다. 모터 옆에 있습니다.
- 수신기 회로 기판에서 프로그래밍 버튼(SW1)을 누르십시오. 수신기의 LED 표시등이 깜빡입니다. 버튼에서 손을 떼십시오.
- 새 리모컨의 두 버튼을 동시에 누르세요. 버튼에서 손을 떼세요. 수신기의 LED 표시등이 계속 켜져 있습니다.
- 새 리모컨의 왼쪽 버튼을 누르세요. 손을 떼세요. 수신기의 LED 표시등이 깜빡입니다.
- 5초간 기다리세요. 수신기의 LED 표시등이 꺼집니다.
- 새 리모컨의 오른쪽 버튼에도 이 절차를 반복하십시오. 이번에는 프로그래밍 버튼 SW2를 사용하십시오.
- 10초간 기다리세요.
- 새 리모컨이 프로그래밍되었습니다.
Type 2 Programming (Digital Display)
- Press the "OK" button on your receiver twice. The screen displays "PARA."
- Press the "-" button on your receiver twice. The screen displays "RADIO."
- Press the "OK" button on your receiver once. The screen displays "ADJ STRT."
- Press the "OK" button on your receiver once. The screen displays "Hidden Button."
- Press both buttons on your new remote control at the same time. Keep them pressed down. The screen displays "Released".
- Let the buttons go. The screen displays "Desired Button".
- Press a button on your new remote control. The screen displays "OK".
- 10초간 기다리세요.
- 새 리모컨이 프로그래밍되었습니다.
Video 1: Demonstration of the remote control programming process with a receiver board.
5. 사용 설명서
Once programmed, your BFT Mitto remote control is ready for use. Simply press the corresponding button on the remote to activate the linked function (e.g., open/close garage door, gate, etc.). Ensure you are within the transmission range for optimal performance.
6. 유지관리
- 배터리 교체: The remote control uses a 12V battery. If the remote's indicator light becomes dim or its range decreases, it's time to replace the battery. Open the remote's casing carefully to access and replace the battery, ensuring correct polarity.
- 청소: 리모컨은 부드럽고 마른 천으로 닦으십시오. 독한 화학 약품이나 연마성 세척제 사용은 피하십시오.
- 저장: 리모컨은 건조하고, 극한 온도와 직사광선을 피해 보관하십시오.
7. 문제 해결
- 리모컨이 응답하지 않음:
- 배터리를 점검하십시오. 필요하면 교체하십시오.
- Ensure you are within the effective transmission range.
- Verify that the remote is correctly programmed to the receiver. If unsure, repeat the programming steps.
- 감소된 범위:
- 배터리를 교체하세요.
- Check for any new obstructions between the remote and the receiver.
- Ensure there is no interference from other 433MHz devices.
8. 사양
| 특징 | 사양 |
|---|---|
| 작동 주파수 | 433MHz |
| 작업 볼륨tage | 직류 12V |
| 전송 거리 | Up to 100m (open environment) |
| 설치 방법 | 벽걸이 형 디자인 |
| 배터리 유형 | 12V battery (commonly used) |
| 인코딩 방법 | 롤링 코드 |
| 치수(길이 x 너비 x 두께) | 64mm(2.52인치) x 40mm(1.57인치) x 16mm(0.63인치) |
Figure 4: Dimensions of the BFT remote control.
9. 응용 프로그램 시나리오
The BFT Mitto Series remote control is versatile and can be used in various applications:
- 스마트 홈 시스템
- Access Control Barrier Gates
- 조명 제어 시스템
- Industrial Equipment Control
- 보안 시스템
- 차고 도어 컨트롤
- 농업 기계
- Main Gates, Fences, Sliding Doors, Railings
Figure 5: Common applications for the remote control.
Figure 6: Additional application examples for the remote control.
10. 패키지 내용
패키지에는 다음이 포함됩니다.
- 1 x 무선 원격 제어
그림 7: 예ample of the 4-key remote control with keychain.
11. 사용자 팁
re에서 특정 사용자 팁을 사용할 수 없습니다.view이 제품에 대한 질문이나 답변.
12. 보증 및 지원
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.
