DOMRAEM ESP32 WLED Digital Music Controller User Manual

1. 제품 오버view

The DOMRAEM ESP32 WLED Digital Music Controller (DOM-WLE-AM) is an advanced, open-source based controller designed for smart LED strip lighting. It features a built-in microphone for music synchronization, supports a wide range of addressable LED chips, and offers versatile control options via a mobile app, voice assistants like Alexa, and integration with smart home platforms like MQTT and Home Assistant.

주요 특징:

• 와이드볼tage Input & High Power Output: Supports 5-24V DC input with 12A per channel and 16A total output capacity. Includes a USB-C 5V/5A direct power supply interface.
• Smart WiFi Connectivity & Open-Source Control: Utilizes ESP32 WLED wireless control technology, allowing direct WiFi connection and easy management via the WLED app. Open-source code supports developer customization and continuous upgrades.
• Sound-Activated & Music Sync: Built-in microphone enables sound-reactive lighting effects that automatically synchronize with music rhythm.
• Multi-Smart Control: Compatible with mainstream voice assistants (Alexa/Google Assistant) and supports dual control modes: remote (sold separately) and mobile app.
• 100+ Lighting Effects: Features a built-in professional-grade lighting effects library, fully supporting DIMMER/RGB/RGBW/RGBCCT light strips for personalized lighting scenes.
• Energy-Efficient Eco-Design: Standby power consumption of approximately 0.5W, ensuring long-term stable operation.
• 폭넓은 하드웨어 호환성: Compatible with mainstream LED chips including WS2811, SK6812, WS2812B, WS2813, WS2814, WS2815, TM1814, and WS2805.

제품 하이라이트:

• Industrial-grade circuit protection design.
• Professional open-source lighting control system.
• One-touch smart scene switching.
• Minimalist aesthetic exterior design.

2. 패키지 내용

다음 품목이 패키지에 포함되어 있는지 확인하세요.

• 1x DOMRAEM ESP32 WLED Digital Music Controller (DOM-WLE-AM)

Note: LED strips, power supply, and remote control are sold separately and are not included in this package.

3. 사양

4. 설정 가이드

4.1 Powering the Controller

The DOMRAEM WLED controller offers flexible power options:

• DC 5-24V 입력: Connect a compatible DC power supply to the 'INPUT DC5V-24V' terminal. Ensure the voltage는 귀사의 LED 스트립 요구 사항을 충족합니다.
• USB-C 5V/5A Input: For 5V LED strips, you can use a USB-C power adapter connected to the 'INPUT USB-C DC5V/5A' port. Do not exceed 5A when using USB-C.
• V+, V- 전원 인터페이스: An additional V+, V- power interface is available for direct power connection.

4.2 Wiring LED Strips

The controller features quick connect port design for convenient wiring. Follow these steps:

1. Open the connector: 커넥터를 위쪽으로 조심스럽게 열어주세요.
2. 와이어 삽입: 피복을 벗긴 전선을 해당 단자에 삽입하십시오.
3. 아래로 누르기: 커넥터를 눌러 전선을 고정하세요.

배선 지침:

• The group of D for GPIO16 is the default output. Please use this group first.
• The other group of D is GPIO2, which can be used after configuration on the APP.
• Ensure correct polarity: V=VCC, D=DATA, G=GND.

4.3 앱 설치

The WLED app is essential for controlling your LED strips. Download it using the following methods:

• iOS: 검색 "WLED" or "WLED Native" in the Apple App Store.
• 기계적 인조 인간: Download from the official GitHub repository: github.com/Aircoookie/WLED-App/releases

4.4 Initial App Configuration (WiFi Setup)

Follow these steps to connect your controller to your WiFi network and the WLED app:

1. 1단계: Power on the WLED controller. Open the phone settings and connect to the WLED-AP WiFi network (password: wled1234).
2. 두 번째 단계: After successful connection, it will automatically redirect to the WLED page. If not, open a browser and enter the WLED page. Click on "WIFI SETTINGS".
3. 세 번째 단계: Click "Scan" to display the account. 메모: Be sure to choose a 2.4GHz WiFi network, otherwise it will not work.
4. 네 번째 단계: Enter the password, then click "save" at the top of the screen after entering the password.
5. 5단계: Connect your phone and WLED controller to the same WiFi.
6. 6단계: Enter the WLED page for configuration.
7. 7단계: Click on "Blank space" to enter the WLED page.
8. 8단계: After successful application, open WLED app.

5. 사용 설명서

5.1 Basic App Control (Colors and Effects)

Once connected to the WLED app, you can easily control your LED strips:

• 그림 물감: Use the color wheel to select static colors or choose from predefined color palettes.
• 효과: Browse through over 100 dynamic effects. Adjust speed, intensity, and other parameters for each effect.
• 세그먼트: Divide your LED strip into multiple sections and apply unique colors and effects to each segment independently.

5.2 음악 모드

The built-in sensitive microphone allows the ESP32 WLED controller to follow music dynamic mode. After resetting, the microphone parameters need to be configured for the first time, and the device needs to be restarted.

구성 정보:

1. 마이크 유형: 일반 I2S
2. I2S SD 핀: 26
3. I2S WS 핀: 5
4. I2S SCK 핀: 21

5.3 음성 비서 통합(알렉사)

To connect your WLED controller with Alexa, follow these steps:

1. WLED 컨트롤러의 제어 페이지로 이동하여 오른쪽 상단의 "설정" 버튼을 클릭한 다음 "인터페이스 동기화"를 클릭합니다.
2. 위로 스크롤하여 "Alexa 음성 비서"를 찾고, "Alexa 기기 에뮬레이션" 옆의 확인란을 선택한 다음 저장하세요.
3. 저장이 완료되면 WLED 컨트롤러의 전원을 껐다가 다시 켜서 전원을 재부팅하십시오.
4. Open "Amazon Alexa" app, click on the "Devices" page at the top right corner on the "+" Sign, and then click "Add Device".
5. 다음으로 위로 스크롤하여 "기타"를 클릭하고, "Wi-Fi"를 선택한 다음 "기기 검색"을 클릭하여 조명을 검색합니다.

5.4 버튼 기능

The controller has two buttons: Reset and Opt.

• 재설정 버튼: Pressing this button will put the controller module in a powered-off state, making the WLED controller unusable. Releasing the button will power the module back on, then you can use WLED controller normally. This button is useful for powering the controller on and off when it's inconvenient.
• 선택 버튼:
  1. 짧게 누르기: 전원 켜기/끄기.
  2. 1초 동안 길게 누르기: 색상을 전환합니다.
  3. Long press for more than 10 seconds: The WLED device will be reset to factory settings and the WLED-AP hotspot will be activated. Do not use unless it is an emergency! If the factory settings have been restored, please refer to the instruction manual to configure the device correctly.

5.5 릴레이 구성

The controller supports relay configuration. When the power is turned off, there is no current passing through the LED strip, thus reducing power consumption. This can be configured within the WLED app settings.

5.6 WLED Remote Control (Optional)

The controller supports WLED remote control for long transmission distance and stable signal. Please note that the WLED remote control is sold separately and is not included with the controller.

5.7 Supported LED Strip Types

The controller supports most addressable LED strip types, including:

• WS2811
• WS2812
• WS2814
• WS2815
• SK6812
• SM16703
• SM16703P3
• FL1903B

5.8 제품 시연 영상

6. 유지관리

To ensure the longevity and optimal performance of your DOMRAEM WLED Digital Music Controller, please follow these maintenance guidelines:

• 청소: Use a soft, dry cloth to clean the exterior of the controller. Avoid using liquid cleaners or solvents, as they may damage the device.
• 환경: Operate the controller within the specified operating temperature range of -20 to 45°C. Avoid exposing it to extreme temperatures, high humidity, or direct sunlight.
• 사이: 모든 배선 연결부를 주기적으로 점검하여 단단히 고정되어 있고 부식이 없는지 확인하십시오. 연결이 헐거우면 작동이 중단되거나 손상될 수 있습니다.
• 저장: 컨트롤러를 장기간 보관할 경우 전원을 차단하고 서늘하고 건조한 곳에 보관하십시오.

7. 문제 해결

If you encounter issues with your DOMRAEM WLED Digital Music Controller, refer to the following troubleshooting tips:

7.1 LEDs Not Responding After Reset/Update

Important: After any reset or OTA update, you MUST configure GPIO12, then briefly press Reset or power cycle the controller. Refer to the manual for detailed configuration.

• Check GPIO12 Configuration: Ensure GPIO12 is correctly configured in the WLED app settings. If abnormal, reconfigure and reboot the controller.
• 전원 공급 장치 검사: If GPIO12 configuration is normal, check the power supply circuit for any issues. Ensure the power supply is providing the correct voltage and sufficient current for your LED strips.

7.2 Connectivity Issues (WiFi)

• Verify WiFi Network: Ensure your phone and the WLED controller are connected to the same 2.4GHz WiFi network. The controller does not support 5GHz networks.
• 비밀번호 확인: Double-check that the WiFi password entered during setup is correct.
• Restart Router/Controller: Try restarting your WiFi router and the WLED controller.
• 공장 설정으로 재설정: If all else fails, perform a factory reset by long-pressing the 'Opt' button for more than 10 seconds. Then, repeat the initial app configuration steps.

7.3 Microphone Not Responding

• 초기 구성: After resetting the device, the microphone parameters (I2S SD pin, WS pin, SCK pin) must be configured in the WLED app settings. Refer to section 5.2.
• 장치 재시작: After configuring microphone parameters, restart the controller for changes to take effect.

8. 사용자 팁

• For optimal performance, ensure your power supply is adequately rated for the length and density of your LED strips.
• Experiment with different effects and segments in the WLED app to discover unique lighting combinations.
• Regularly check for WLED firmware updates to access new features and improvements.
• When using voice control, ensure clear pronunciation and that your voice assistant is properly linked to the WLED controller.

9. 보증 및 지원

The DOMRAEM ESP32 WLED Digital Music Controller comes with a 2년 보증 구매일로부터 제조상의 결함에 대한 보증을 제공합니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주세요.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or visit the official DOMRAEM support web대지.

10. 안전 정보

• 입력 볼륨을 항상 확인하십시오.tage (DC 5-24V) matches the requirements of your LED strips and power supply. Exceeding the maximum voltage or current can damage the controller and LED strips.
• When using the USB-C input, ensure the power supply does not exceed 5V/5A.
• Ensure all wiring is correctly connected with proper polarity (VCC, Data, GND) to prevent damage.
• Do not expose the controller to water, moisture, or extreme temperatures.
• 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
• Do not attempt to open or modify the controller, as this will void the warranty and may pose a safety risk.